AT&T CLP99287 User manual

This quick start guide provides you
with basic instructions only. For
more complete instructions, refer
to your user’s manual provided in
the package, or download it at
www.telephones.att.com/manuals.
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com or call 1 [phone]. In
Canada, dial 1 [phone].
Notes:
 Plug one end of the telephone line cord into a telephone jack or a DSL
lter.
 If you have DSL high-speed Internet service, a DSL lter (not included)
is required.
Telephone base
Install Overview
Charger
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged aer 11 hours
of continuous charging.
Handset
PUSH TO TALK
VOICE
Press to initiate a one-to-one or
one-to-group broadcast.
Press and hold to broadcast to a
group of system devices.
Press to activate the
voice-controlled application of
connected cell phone.
CELL 1/
CELL 2
Press to make or answer a cell call.
During a cell call, press to answer
an incoming CELL 1/2 call when you
hear a call waiting alert.
HOME/
FLASH
Press to make or answer a home
call.
During a call, press to answer an
incoming home call when you
receive a call waiting alert.
During a call, press to hang up.
While in a menu, press to cancel an
operation, back up to the previous
menu, or exit the menu display; or
press and hold this button to exit
to idle mode.
When the handset is ringing, press
to mute the ringer temporarily.
Press and hold while the telephone
is not in use to erase the missed
call indicator.
1
Press and hold to set or dial your
voicemail number.
TONE /a>A Press to switch to tone dialing
temporarily during a call if you
have pulse service.
While entering names, press to
change the next letter to upper or
lower case.
QUIET/#Press and hold to enter the
QUIET mode setting screen, or to
deactivate QUIET mode.
Press to make or answer a home or
cell call using the speakerphone.
MUTE/DELETE During a call, press to mute the
microphone.
While entering numbers or names,
press to delete a digit or character.
While reviewing caller ID log,
directory, redial memory, allow list,
block list, or star name list, press to
delete an individual entry.
REDIAL/PAUSE Press repeatedly to view the last
ten numbers dialed.
While entering numbers, press and
hold to insert a dialing pause.
Telephone base
DIRECTORY Press to scroll up while in a
menu.
Press to show directory entries
when the telephone base is
not in use.
CALLER ID Press to scroll down while in a
menu.
Press to show caller ID log
when the telephone base is
not in use.
USB port The standard size USB port in
the telephone base is used for
charging your cell phones.
X/DELETE During a call, press to mute the
microphone.
While entering numbers or
names, press to delete a digit
or character.
Press to delete the message
currently playing.
Press twice to delete all
previously reviewed messages
when the telephone is not in
use.
/ REPEAT During message playback,
press to repeat a message
or press twice to play the
previous message
/ SKIP During message playback,
press to skip a message.
Part lists
THISSIDE UP/ CE CÔTÉ VERS LE HAUT
BatteryPack/ Bloc-piles :
BT183342/BT283342(2.4V400mAh Ni-MH)
WARNING/AV ERTISSEMENT:
DONOTBURN OR PUNCTURE BATTERIES.
NEPASINCINÉRER OU PERCER LES PILES.
MadeinChina / Fabriqué en chine CR1535
2 for CLP99287
3 for CLP99387
4 for CLP99457/
CLP99487
5 for CLP99547/
CLP99557/
CLP99587
CLP99287/CLP99387/CLP99457/
CLP99487/CLP99547/CLP99557/
CLP99587
DECT6.0cordless telephone/
answeringsystemwith
BLUETOOTH®wirelesstechnology
User’smanual
1 for CLP99287
2 for CLP99387
3 for CLP99457/
CLP99487
4 for CLP99547/
CLP99557/
CLP99587
Handset
CHARGE light On when the handset is charging in
the telephone base or charger.
Softkeys (2) Press to select the menu item
displayed above the key.
While in a menu, press to select
an item, save an entry or setting,
cancel an operation, or back up to
the previous menu.
DIR Press DIR to show directory entries
when the handset is not in use.
Press to scroll up or down while in
menus.
Press to increase or decrease the
listening volume when on a call.
While entering names or numbers,
press to move the cursor to the le
or right.
CID Press CID to show caller ID log
when the handset is not in use.
Telephone base
/PLAY/STOP Press to start or stop message
playback.
CELL 1/CELL 2 Press to make or answer a cell
call.
HOME
(Speakerphone)
Press to make or answer a
home call.
1Press and hold to set or dial
your voicemail number.
TONE /a>A Press to switch to tone dialing
temporarily during a call if you
have pulse service.
While entering names, press
to change the next letter to
upper or lower case.
QUIET/#Press and hold to enter the
QUIET mode setting screen, or
to deactivate QUIET mode.
/ HANDSET
LOCATOR
While the phone is idle, press
to page all handsets.
MUTE During a call, press to mute the
microphone.
While the telephone base is
ringing, press to silence the
ringer temporarily.
VOLUME While in idle mode, press to
adjust the base ringer volume.
During message playback,
press to adjust the listening
volume.
VOICE Press to activate the
voice-controlled application of
connected cell phone.
MIC Microphone.
PTT/FLASH Press to display the PTT menu
to begin a PTT call.
Press and hold to begin a
one-to-group broadcast when
the telephone base is not in
use.
During a call, press to answer
an incoming home call when
you receive a call waiting alert.
Softkeys (2) Press to select the menu item
displayed above the key.
While in a menu, press to
select an item, save an entry or
setting, cancel an operation, or
back up to the previous menu.
CANCEL While in a menu, press to exit
without making changes or
press and hold to return to idle
mode.
Press and hold while the
telephone is not in use to erase
the missed call indicator.
REDIAL/PAUSE
/ ANSWER ON
Press repeatedly to view the
last ten numbers dialed.
While entering numbers, press
and hold to insert a dialing
pause.
Press to turn the built-in
answering system on or o.
Basic initial settings
We recommend you program your telephone system
before use. The following are a few examples of common
features to set before using the telephone. Refer to the
Handset and telephone base settings and Answering
system settings in the Complete user’s manual for detailed
instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. MENU -> /-> Set date/time -> SELECT.
2. Enter the month (MM), day (DD) and year (YY)-> NEXT.
3. Enter the hour (HH) and minute (MM).
4. /-> AM or PM -> SAVE.
Basic answering system setup via
voice guide
You can follow the voice guide to record your own
announcement, set the number of rings and set the
message alert tone.
Using a cordless handset or the telephone base:
1. MENU -> /-> Answering sys -> SELECT.
2. /-> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated
numbers, as instructed.
Add a Bluetooth®cell phone/headset
To use a Bluetooth enabled cellular phone or headset
with your telephone, you must rst pair and connect your
Bluetooth cellular phone or headset with the telephone
base.
Bluetooth wireless technology operates within a short range
(up to 30 feet). Keep the connected device within 15 feet of
the telephone base for optimal performance.
To pair and connect a cell phone using the telephone
base:
1. MENU -> /-> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. SELECT to select Add cellular.
4. Disconnect the cell phone from any Bluetooth device ->
Press NEXT.
5. Place the cell phone next to the telephone base.
6. Press NEXT to turn on the telephone base discoverable
mode.
7. Turn on the Bluetooth feature of your cell phone and
search for or add new advices. Once your cell phone nds
your AT&T phone (AT&T DECT 6.0), press the appropriate
key on your cell phone to continue the pairing process.
 Enter the cell phone passcode (typically 0000), if
required ->Press SET.
 Enter the PIN (default PIN: 0000) of the telephone
base into your cell phone, if required.
To pair and connect a headset using the telephone base:
1. MENU -> /-> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. /-> Add headset -> SELECT.
4. Disconnect your headset from any Bluetooth device ->
Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press /to choose your headset, if required -> Press
SELECT.
 Enter the PIN (typically 0000) of your headset, if
required -> Press NEXT.
THISSIDEUP / CE CÔTÉ VERS LE HAUT
THISSIDE UP / CE CÔTÉVERS LE HAUT
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587
Quickstart guide
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and anyuse
of such marks by Advanced American Telephonesand its parent, VTech Holdings
Limited, is under license. VTechHoldings Limited is a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Quick start guide
© 2017 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio,TX 78219.
Printed in China. Issue 1.1AT&T 03/17.
Part lists
Install
Overview
Basic initial settings
Operate
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587

1. MENU -> /-> Bluetooth -> SELECT.
2. /-> Download dir -> SELECT.
3. /to choose among Phone memory, SIM card only
or Phone and SIM -> SELECT.
4. Press NEXT to start downloading.
 Enter the cell phone passcode, if necessary -> SET.
 Press a key on your cell phone to conrm the directory
download.
5. Press OK to exit.
If you are using Bluetooth-enabled cell phones
with Android® OS 2.3 or above, you may also
download the Connect to Cell™ application
(consists of Caller ID manager and Alerts
manager) using the Google Play® Store app
to extend the exibility of your CLP99287/
CLP99387/CLP99457/CLP99487/CLP99547/
CLP99557/CLP99587. Scan the QR code on the
right to download the application.
Directory
Answering system
The directory can store up to 200 entries, which are shared by
all system devices.
Operation Steps
Adding an entry
in the home
directory
1. MENU -> /-> Directory ->
SELECT.
2. OPTION to select Home.
3. SELECT to select Add contact.
4. Enter a telephone number up to
30 digits -> NEXT.
5. /to select Home, Cell,
Work, Other -> NEXT.
6. Enter a name up to 15 characters ->
SAVE.
Searching/dialing
an entry
1. Press DIR on the handset, or
DIRECTORY on the telephone
base in idle mode -> /to
select the desired directory ->
REVIEW.
2. Press /to browse through
the directory, or press the dialing
keys (0-9) to start a name search.
3. Press HOME/FLASH or
/SPEAKER on the handset, or
press HOME on the telephone
base to call using the home line.
-OR-
Press CELL 1 or CELL 2 on
the handset, or press CELL 1 or
CELL 2 on the telephone base to
call using the cell line.
To download a cell phone directory using the telephone
base:
Before downloading a directory, make sure the cell phone is
paired, active, and connected to your CLP99287/CLP99387/
CLP99457/CLP99487/CLP99547/CLP99557/CLP99587.
About answering system and voicemail
Your telephone has separate indicators for two dierent
types of voice messages: those le on the built-in answering
system and those le at your telephone service provider’s
voicemail. To listen to messages recorded on the built-in
answering system, refer to the Message playback section;
to listen to voicemail, contact your telephone service
provider for more information.
Turn answering system on or o
The answering system must be turned on to answer and
record messages.
Using a cordless handset:
1. MENU -> /-> Answering sys -> SELECT.
2. /-> Answer ON/OFF -> SELECT.
3. /to choose On or O-> SELECT.
When the answering system is on, the handset shows ANS ON.
Using the telephone base:
 Press /ANSWER ON to turn the answering system on
or o. If the answering system is turned on, it announces,
“Calls will be answered.” If the answering system is turned
o, it announces, “Calls will not be answered.”
Message alert tone
When this feature is on, and there is at least one new
message, the telephone base beeps every 10 seconds.
Using a cordless handset or the telephone base:
1. MENU -> /-> Answering sys -> SELECT.
2. /-> Ans sys setup -> SELECT.
3. /-> Msg alert tone -> SELECT.
4. /to choose On or O -> SELECT.
Call screening
Use this feature to choose whether incoming messages can
be heard over the speaker when they are being recorded. If
you turn call screening on, you hear the incoming message.
While monitoring an incoming message, you can answer the
call by pressing HOME/FLASH on the handset or HOME on
the telephone base.
Using a cordless handset or the telephone base:
1. MENU -> /-> Answering sys -> SELECT.
2. /-> Ans sys setup -> SELECT.
3. SELECT to select Call screening.
4. /to choose On or O -> SELECT.
Message playback
Using the telephone base:
Press /PLAY/STOP when the telephone base is in idle
mode.
Using a cordless handset:
Press MENU then SELECT when the handset is in idle
mode.
Options during playback
Feature On the telephone
base
On a handset
Adjust
playback to
volume
Press VOLUME Press

or 
Stop
playback
Press PLAY/STOP Press
OFF/CANCEL
Skip to
the next
message
Press /SKIP Press SKIP
Repeat the
message
Press /REPEAT Press REPEAT
Play the
previous
message
Press /REPEAT
twice
Press REPEAT
twice
Delete the
message
Press X/DELETE Press
MUTE/DELETE
For a full set of installation and operation instructions,
refer to the CLP99287/CLP99387/CLP99457/
CLP99487/CLP99547/CLP99557/CLP99587
DECT 6.0 cordless telephone/answering
system with BLUETOOTH®wireless
technology user’s manual in the package, or
download it at
www.telephones.att.com/manuals.
For customer service or product information, visit our
website at www.telephones.att.com or call
1 [phone]. In Canada, dial 1 [phone].
If you have subscribed to caller ID service, then you can use
the Smart call blocker feature to lter incoming calls from
unknown callers.
Turn Smart call blocker on or o
Smart call blocker is set to on, and to screen all unknown
calls by default. To turn on or o Smart call blocker:
1. MENU -> /-> Smart call blk -> SELECT.
2. /-> SCB On/O -> SELECT.
3. /to choose On or O -> SELECT.
Notes:
Smart call blocker is on and in default screening mode, once you install
your telephone. It will screen all incoming calls and asks callers to
announce their names. We recommend that you set up your directory,
allow list, and star name list before using your telephone with Smart
call blocker. This can avoid calls from your business associates, family
members and friends to go through the screening process.
If you turn o Smart call blocker, all incoming calls will ring, including
numbers saved in your block list.
When QUIET mode is on, and Smart call blocker is on and in screening
mode, all screened calls will be sent to the answering system aer
screening.
Call controls
Call categories Call control and
options
Unwelcome
calls
Numbers saved
in block list.
The telephone blocks
these calls from
ringing through.
Welcome calls Numbers saved
in allow list.
Numbers saved
in directory.
Numbers do
not found in
block list.
Caller ID names
saved in star
name list.
The telephone allows
these calls to get
through and ring.
Calls without
numbers
Numbers that
are “out of
area“ or set to
“Private“.
You can choose one
of the following ve
options:
Screening with
caller name (default
setting)
The telephone
plays the screening
announcement, and
then ask the caller
to say his/her name
before the call rings
on your telephone.
You can then answer
the call, and hear
the caller’s name
announced. You can
decide whether to
accept or reject the
call, or to forward the
call to the answering
system.
Screening without
caller name
The telephone
plays the screening
announcement, and
then ask the caller
to press the pound
key (#) before the
call rings on your
telephone. You can
then answer the call.
Allow
The telephone allows
the calls to get
through and ring.
Answering system
The telephone
forwards the calls to
the answering system
without ringing.
Block
The telephone rejects
the calls with block
announcement.
Uncategorized
calls
With absent
caller ID
number.
Numbers do
not found in
directory.
Numbers do
not found in
allow list.
Numbers do
not found in
block list.
With caller ID
names that do
not found in
star name list
Basic setups
Set up block list, allow list, and star name list
Call block
basic setups
Steps
Adding an entry in
block list 1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Block list -> SELECT.
3. or -> Add new entry ->
SELECT.
4. Enter a telephone number up to
30 digits -> NEXT.
5. Enter a name up to 15 characters ->
SAVE.
Adding an entry in
allow list 1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Allow list -> SELECT.
3. or -> Add new entry ->
SELECT.
4. Enter a telephone number up to
30 digits -> NEXT.
5. Enter a name up to 15 characters ->
SAVE.
Adding an entry in
star name list 1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Star name list ->
SELECT.
3. or -> Add new entry ->
SELECT.
4. Enter a name up to 15 characters ->
SAVE.
Notes
The allow list stores up to 200 entries, the block list stores up to 1,000
entries, and the star name list stores up to 10 names.
There are many organizations like schools, medical oces, and
pharmacies that use robocalls to communicate important information
to you. Robocall uses an autodialer to deliver pre-recorded messages.
By entering the name of the organizations into the star name list, it
ensures these calls will ring through when you only know the caller
names but not their numbers.
Call block settings
Set call block Steps
Allow all calls to
ring, including
numbers on the
block list
1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> SCB On/O ->
SELECT.
3. or -> O -> SELECT.
Screen all
unknown calls
(default settings)
1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Calls w/o num ->
SELECT.
3. or -> Screening -> SELECT.
4. or -> w/ Caller name ->
SELECT.
5. or -> Uncategorized ->
SELECT.
6. or -> Screening -> SELECT.
7. or -> w/ Caller name ->
SELECT.
Block all unknown
calls 1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Calls w/o num ->
SELECT.
3. or -> Block -> SELECT.
4. or -> Uncategorized ->
SELECT.
5. or -> Block -> SELECT.
Smart call blocker*
Caller ID
This product supports caller ID services oered by most
telephone service providers. The telephone stores caller ID
information of the last 50 incoming calls in the telephone
base. This information is common to all devices.
Caller ID announce
When this feature is on and you have an incoming call, the
handset and/or base speaks “Call from...” and the name of
the caller based on the directory or caller ID information.
You can turn this feature o for the base or each individual
handset, or both.
Using a cordless handset or the telephone base:
1. MENU -> /-> Caller ID annc -> SELECT.
2. /to choose On or O -> SELECT.
Review and dial a number in the call
log
1. Press CID on the handset or CALLER ID on telephone
base in idle mode -> /to scroll through the list.
2. Press HOME/FLASH or /SPEAKER on the handset or
HOME on the telephone base to dial with the home line.
-OR-
Press CELL 1 or CELL 2 on the handset, or press
CELL 1 or CELL 2 on the telephone base to dial with the
cell line.
Erase missed calls indicator in the
call log
When the screen shows XX Missed calls, scroll the call
log one by one, or press and hold OFF/CANCEL on the
handset or CANCEL on the telephone base in idle mode.
Operate
Operation Steps
Making a home
or cell call
Using a cordless handset:
 Press HOME/FLASH or
/SPEAKER -> Enter the telephone
number.
 Press CELL 1 or CELL 2 ->
Enter the telephone number -> DIAL.
Using the telephone base:
 Press HOME -> Enter the telephone
number.
 Press CELL 1 or CELL 2 -> Enter the
telephone number -> DIAL.
On-hook dialing
(predialing)
Using a cordless handset:
Enter the telephone number ->
Press HOME/FLASH, CELL 1 ,
CELL 2 or /SPEAKER to call.
Using the telephone base:
Enter the telephone number ->
Press HOME, CELL 1 or CELL 2 to call.
Answering a
home or cell call
Using a cordless handset:
Press HOME/FLASH, CELL 1 ,
CELL 2 or /SPEAKER, or press
any dialing keys (0-9 or TONE ).
Using the telephone base:
Press HOME, CELL 1 or CELL 2 or press
any dialing keys (0-9 or TONE ).
Record your own announcement
Your outgoing announcement plays when calls are
answered by the answering system. You can use the preset
announcement to answer calls, or replace it with your own
recorded announcement.
Using a cordless handset or the telephone base:
1. MENU -> /-> Answering sys -> SELECT.
2. SELECT to select Announcement.
3. SELECT to select Record annc.
4. Speak towards the handset or the telephone base to
record your announcement and press STOP to end
recording and save it.
Number of rings
You can set the answering system to answer an incoming
call aer 2, 3, 4, 5, or 6 rings. You can also select toll saver. If
you choose toll saver, the answering system answers a call
aer two rings when you have new messages, or aer four
rings when there are no new messages. This enables you to
check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local
area.
Using a cordless handset or the telephone base:
1. MENU -> /-> Answering sys -> SELECT.
2. /-> Ans sys setup -> SELECT.
3. /-> # of rings -> SELECT.
4. /to choose among 2, 3, 4, 5, 6, or Toll saver ->
SELECT.
Ringer volume
You can set the ringer volume level to one of the six levels,
or turn the ringer o.
Using a cordless handset or the telephone base:
1. MENU -> /-> Ringers -> SELECT.
2. SELECT to select Ringer volume.
3. /to choose the desire level -> SET.
Reset language to English
If you have accidentally changed the screen display
language and want to switch back to English, follow the step
below.
Using a cordless handset or the telephone base:
in idle mode -> enter 364#.
Block calls on the
block list only 1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Calls w/o num ->
SELECT.
3. or -> Allow -> SELECT.
4. or -> Uncategorized ->
SELECT.
5. or -> Allow -> SELECT.
Forward all
unknown calls to
the answering
system
1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Calls w/o num ->
SELECT.
3. or -> Answering sys ->
SELECT.
4. or -> Uncategorized ->
SELECT.
5. or -> Answering sys ->
SELECT.
Block calls
without numbers
and send
uncategorized
calls to the
answering system
1. MENU -> /-> Smart call blk
-> SELECT.
2. or -> Calls w/o num ->
SELECT.
3. or -> Block -> SELECT.
4. or -> Uncategorized ->
SELECT.
5. or -> Answering sys ->
SELECT.
Remote voice control
If you have connected a cell phone to the telephone system,
you can activate the voice-controlled application (voice app)
of the cell phone, such as Siri®, Google Now™ or S Voice®,
using the handset or telephone base.
Compatibility:
The remote voice control feature works with:
Voice-
controlled
application
Siri Google Now S Voice
Operation
System
(Versions
supported)
iOS (8 or
above)
Android (4 or
above)
Android (4
or above)
Before using the remote voice control feature, make sure
you checked the following:
 Your cell phone is paired and connected to your
telephone system via Bluetooth.
 No Bluetooth applications are running in the background
of your cell phone.
 Keep your cell phone within 15 feet of the telephone base.
 Do not lock up your cell phone’s screen or set passcode
for activating the voice app.
 Make sure you have turned on or logged in to the
applications on your cell phone that you will be sending
your voice commands, such as GPS, e-mail and social
networking accounts.
 Your cell phone’s data or Wi-Fi signal is in full strength and
your cell phone can connect to the Internet.
 Try to activate the voice app on your cell phone to ensure
it is in place.
To activate remote voice control:
1. Press VOICE.
-OR-
If you have two connected cell phones, press VOICE ->
CELL 1 or CELL 2.
2. When the telephone base or handset plays the
conrmation tone, speak toward the telephone base or
handset, and then wait for feedback. Make reply to the
voice app’s feedback, if necessary.
3. Press END to exit.
Notes:
 Once you have activated the remote voice control feature, you are using
your cell phone’s voice app to operate your cell phone.
 Please check the cell phone user’s manual and the voice app’s help
topics to nd out what commands you can use and any limitations of
the voice app.
 Some cell phone manufacturers or network carriers may customize the
phone’s operating system and implement their own voice app. If you
want to use Google Now, you need to manually set it as your default
voice app. For detailed instructions, refer to your cell phone user’s
manual, or contact your cell phone’s manufacturer or network carrier.
You may also go to “Google Product Forums” on the Internet and check
the corresponding help topics.
 Due to the settings of certain cell phones and voice apps, your cell
phone may not support the remote voice control feature. Contact your
cell phone’s manufacturer or network carrier, or check the voice app’s
help topics if you encounter any problems.
 During the remote voice control activation, if your Android cell phone
comes with both a dedicated voice app and Google Now, it may prompt
you to select which voice app to use, and whether use it for just once
or always. Select the desired options. If you do not respond to your cell
phone’s prompt in time, the telephone displays Connection timeout.
Please check cell status.. Press OK and try again.
 If you need to press dialing keys (0-9, TONE , QUIET#) during a cell
call, please make the call using the cell lines of your telephone system
instead of using the voice app via the remote voice control feature.
Siri® is a registered trademark of Apple Inc.
IOS is a trademark or registered trademark of Cisco in the U.S.and other countries
and is used under license.
Google NowTM is a trademark of Google Inc.
S Voice® is a registered mark of Samsung ElectronicsCo., Ltd.
Operation Steps
Ending a call Using a cordless handset:
Press OFF/CANCEL or return the
handset to the telephone base or
charger.
Using the telephone base:
Press HOME, CELL 1 or CELL 2.
Handset
speakerphone
During a call, press /SPEAKER
to switch between handsfree
speakerphone and normal handset use.
Redial Using a cordless handset:
Press REDIAL repeatedly to select the
desired entry -> HOME/FLASH,
CELL 1 ,CELL 2 or /SPEAKER
to call.
Using the telephone base:
Press REDIAL/PAUSE repeatedly to
select the desired entry -> HOME,
CELL 1 or CELL 2 to call.
Volume control Using a cordless handset:
Press

to decrease or press to
increase the listening volume during
a call.
Using the telephone base:
Press VOLUME to decrease or press
VOLUME to increase the listening
volume during a call.
Call waiting
(Requires
subscription
from telephone)
Press HOME/FLASH on the handset
or PTT/FLASH on the telephone base
to put current call on hold and to take
the new call.
Press CELL 1 or CELL 2 on the
handset, or press CELL 1 or CELL 2 on
the telephone base to put the current
call on hold and to take the new call.
Connect to CellTM is a trademark of Advanced American Telephones.
Android® and Google Play® are registered trademarksof Google Inc.
* Includes licenced QaltelTM technology.
QaltelTM is a trademark of Truecall Group Limited.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Advanced American Telephonesand its parent, VTech Holdings
Limited, is under license. VTech Holdings Limitedis a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Android® and Google Play® are registered trademarks of Google Inc.
Connect to cellTM is a trademark of Advanced American Telephones.
Google NowTM is a trademark of Google Inc.
S Voice® is a registered mark of Samsung Electronics Co.,Ltd.
Siri® is a registered trademark of Apple Inc.
IOS is a trademark or registered trademark of Cisco in the U.S.and other countries
and is used under license.
QaltelTM is a trademark of Truecall Group Limited.