Philips CD6550B/12 User manual

Call from the phonebook
1. Press din idle mode.
2. Scroll :to a phonebook entry.
3. Press ror vkey.
The call is initiated.
Troubleshooting
For more information, please refer to the User Manual that came with your
phone.
Problem Solution
• There’s no dialling tone! • Check the connections
• Charge the batteries
• Use the line cable provided
• Caller cannot hear me
clearly!
• Move closer to the base station
• Move the base station at least one metre away
from any electrical appliances
• SEARCHING... is
displayed on handset and
icon is blinking!
• Move closer to the base station
• Reset your unit and restart the handset registration
• Caller number is not
displayed!
• Check your subscription with your network
operator
Welcome to Philips!
Register your product and get support at
www.philips.com/welcome
Need help?
User Manual
Refer to the User Manual that came with your new phone.
Online help
www.philips.com/support
©2008 Koninklijke Philips Electronics N.V.
All rights reserved.
Reproduction in whole or in part is prohibited without the written
consent of the copyright owner.
Document number: 3111 285 50381 (EN) Printed in China
Register your product and get support at
www.philips.com/welcome
Connect
Install
Enjoy
1
2
3
Quick start guide
CD6550
CD6550_QSG_EN.fm Page 1 Tuesday, April 14, 2009 5:29 PM

Enjoy
3
Make a call
Dial the number (maximum 24 digits) and press ror vkey.
OR
Press ror vkey to take the line and dial the number (maximum 24 digits).
Answer a call
When the phone rings, press ror vkey.
End a call
To end a conversation, press ekey.
Adjust earpiece volume
During a call, press :to select from VOLUME 1, VOLUME 2 or VOLUME 3.
Store a contact in the phonebook
1. Press Mkey in idle mode, scroll :to PHONEBOOKand press mSELECT,
press mSELECT to enter NEW ENTRY.
2. ENTER NAME is displayed on the screen.
3. Enter the name of the contact (maximum 14 characters) and press mOK.
4. Enter the phone number (maximum 24 digits) and press mOK.
A validation tone is emitted.
Access the phonebook
1. Press din idle mode and scroll :to browse the phonebook.
2. To view the details, press mSELECT.
Set the ring melody
1. Press Min idle mode, scroll :to PERSONAL SETTING and press
mSELECT, scroll :to HANDSET TONES and press mSELECT, scroll :
to RING TONES and press mSELECT.
2. Scroll : to your desired melody to play the melody.
3. Press mSELECT to set the ring melody.
A validation tone is emitted and the screen returns to previous menu.
What’s in the box
Handset
Power supply2 AAA rechargeable
NiMH batteries
Battery door
Guarantee
User manual
Quick Start Guide
Charger
Connect
Connect the charger
Install
Insert rechargeable batteries and charge
1
1. Place the charger in a central location near the electricity socket.
2. Connect the power cable to their corresponding connectors at the bottom of the
charger as shown.
2
Insert batteries Charge handset for 24 hours
AB
Registering your additional handset
Additional handsets must be registered to the base station before you can use them.
1. On the base station, press and hold pfor approximately 5 seconds.
2. Within 10 seconds, press Mkey on the handset. Scroll :to ADVANC.
SETTINGS and press mSELECT, scroll :to REGISTRATION and press
mSELECT.
3. Enter the master PIN (default is 0000) when prompted and press mOK to confirm.
4. WAITING_
_is displayed on the screen.
CD6550_QSG_EN.fm Page 2 Tuesday, April 14, 2009 5:29 PM