ATD Tools ATD017-00 User manual

ATD017 - OO (1:76 Scale)
Set of 3 Garden Sheds (Green)
- Instruction Manual
Tools Required
Modellers Knife (with a fresh blade)
Cutting Mat
Modelling Glue (we recommend Deluxe Materials Roket Card Glue)
Fine Tip Applicator
Low-tac Masking Tape
Clips / Clamps
Tips
Prior to starting your build, we recommend reading through the instructions to
familiarise yourself with the build style of the kit.
We recommend painting any white edges as you remove the components from
the sheet to improve the nished look. We advise watercolour paints for the best
nish.
Each component is held in the sheet using score lines, indicated by a scissor
symbol. To remove the component from the sheet, carefully run the tip of your
modelling knife through the score line.
Remove each component as it is required to prevent losing or mixing it up with
another component.
Ensure that glue is distributed evenly and not too close to the edge as it may ooze
out when pressure is applied.
Use low-tac masking tape, clamps and weights to aid the assembly process.
Garden Shed Potting Shed Summer House

Garden Shed
1. Detach component A and place it face down on your work surface. Then
cut out the window on the glazing sheet and glue it into position.
2. Fold component A along the
crease lines and glue. Next, detach
component B (base) and apply a
bead of glue around the edges.
Then, position the base within
the walls.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.
3. Detach component C, fold it along
the crease line and then glue it to
the shed. Next, detach component
D (x2) and glue them to the front
and back of the shed, as per the
illustration to the right.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.

Potting Shed
1. Detach component F and place it face down on your work surface. Then
cut out the window on the glazing sheet and glue it into position.
2. Fold component F along the
crease lines and glue. Next, detach
component G (base) and apply a
bead of glue around the edges.
Then, position the base within
the walls.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.
3. Detach component H, fold it along
the crease line and then glue it to
the shed.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.

Summer House
1. Detach component I and place it face down on your work surface. Then
cut out the windows on the glazing sheet and glue it into position.
2. Fold component I along the
crease lines and glue. Next, detach
component J (base) and apply a
bead of glue around the edges.
Then, position the base within
the walls.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.
2. Detach component K, fold it along
the crease line and then glue it to
the shed. Next, detach component
D (x2) and glue them to the front
and back of the shed, as per the
illustration to the right.
We recommend using ATD
low-tac masking tape to assist
on this step whilst the glue cures.
You have now completed all three shed kits. We hope you enjoyed and
successfully built the kit! To view our other card kits, more products and nd
your local stockist, visit www.atdmodels.co.uk
We’d love to see photos of your nished models. Please send them to
[email protected] for a chance to be featured on our social media pages.
© Copyright ATD Models | All Rights Reserved