ATIGO A1702 User manual

A1702
2-WireVideo Receiver
User manual

Contents
Video Receiver A1702....................................................................................................................2
Parts &Functions.................................................................................................................2
Key functions.......................................................................................................................2
Terminaldescription.............................................................................................................2
Mounting..............................................................................................................................2
Main Menu..........................................................................................................................3
Answering acall...................................................................................................................3
Monitoring............................................................................................................................5
Zoom....................................................................................................................................5
Scale....................................................................................................................................5
Screen and volume adjustments.....................................................................................................6
Image adjustments...............................................................................................................6
Volume adjustments............................................................................................................6
Door release........................................................................................................................6
Call another room or apartment (Intercom)..........................................................................6
Do Not Disturb.....................................................................................................................7
General settings..............................................................................................................................7
Ring tonesetting..................................................................................................................7
Ring tonevolume.................................................................................................................8
Setting screen time..............................................................................................................8
Intercomfunction.................................................................................................................8
Restoring thedefault settings...............................................................................................9
Installer menu......................................................................................................................9
Concierge unit....................................................................................................................10
Date and time format.........................................................................................................10
Unlock mode......................................................................................................................11
Unlock time........................................................................................................................11
Setting the user code.........................................................................................................11

Video Receiver A1702
Parts &Functions
Key functions
Speaker
•Enables communication with the visitor
Talk/Mon button
•Press for hands-free communication
withthe visitor
•Press to view the camera in standby
LCD screen
•Display the imageof the visitor
Power/Do Not
Disturb
•Show the power status of the system
•Turn on Do Not Disturb mode
Microphone
•Transmit audio to the entry panel or
other monitors
Unlock button
•Press to unlock the door
Connection port
•BUS terminal and monitor addressing
Terminaldescription
SW+ / SW-
Extra doorbell call button connection port
Ring / GND
Extra buzzer connection port
POW / GND
12~16V extra power connection port
DIP switches
Total 6 bits can be configured
Bit1~Bit5
User code setting switch
Bit6
Video impedance matching switch
L1 / L2
BUS lineterminal
Mounting
A. Embed themountingboxintothe
wall.
B. Usescrews to fastenthe
mountingbracketto themounting
box.
C. Connectthe2wirescableto the
unit.
D. Mounttheunitontothemounting
bracket.
Thesuggestedinstallationheightis between
145~160 cmfromground.

Main Menu
The Main Menu is the starting point for all
the applications on the receiver.
To access the Main Menu, touch anywhere
on the receiver screen in standby mode.
Below is an image whilethe receiver is in communication
Answering acall
1. Touch Talk/Mon button to answer the call. To end the
call, touch the button again.
2. If necessary, during the call, touch the Setting button
to display the audio/video settings.
3. To unlockthedoorto thevisitor,touchthe doorlock
key button.An indicator thatthedoor lock has been
released will displayonthescreenbriefly.

Monitoring
By using an internal CCTVcamera,youcan usethisfunctionto monitortheinteriorofthehouse
(i.e.,garage, hallway,garden)or asecondary entrance.
1. During a call, press the Monitor button from the Main Menu.
2. If more than one camera is configured or the system has a secondary video door entry
panel, press the Monitor button to cycle through.
3. Touch the Back arrow to return to previous menu.
Zoom
If youwantto seemoredetails,youcanmoveto thedesiredpositionby touchingthe magnifying
glass buttonandchooseapartonthe screentoZOOMthe imageview.
Note: Thisfunctionrequiresafisheyecameralens.
Scale
To adjusttheScaleoftheimage,useoneofthefollowingtwo modes.
1. 4:3 –This modesets theimagenarrower
2. 16:9 –This modesets theimagestretchedon thescreen

Screen and volume adjustments
During an active call either from the door entry panel or intercom communication, you can adjust the
contrast, brightness, colour or volume.
Image adjustments
There are three predefined modes to select from: Normal, Bright, and Soft. Each mode can have
its contrast, brightness or colour further tweaked as needed.
1. Adjust the contrast of the screen within the range zero to nine by pressing the “+” or “-”.
2. Adjust the brightness of the screen within the range zero to nine by pressing the “+” or “ -”.
3. Adjust the colour of the screen within the range zero to nine by pressing the “+” or “ -”.
Volumeadjustments
In thesameway as theimage,thevolumecanbeadjustedifitis toolowor toohigh.
1. Adjust the volume of the screen within the range zero to nine by pressing the “+” or “-”
Doorrelease
When a visitor pushesthe call buttonfromthe
entry panel,thereceiverwillstartringing.To
answer thecall,touchTalk/Monbutton.Press
the unlock buttonto release theprimarydoor.
If thecall comesfromasecondary entrance,
press unlock2nd button.Checkwithyour
installer ifthe lock iselectricandifitcan
connectto thesystem.
Call anotherroom orapartment (Intercom)
It is possible to communicate with another receiver located in another room of the house or with a
monitor in another apartment.
1. Select Intercom function from the Main Menu.
2. Select the Keypad button you wish to call a receiver extension that you know and type the
receiver number.
3. Select the Name list button if you wish to view a list of saved receiver numbers.
4. Youcan also selectInnerCallto opencommunicationwithanother roominthesame
house.
5. SelectingtheGuardStationwillcalltheconciergeunit.

Note:When acallis receivedfrom entrypanelwhileusingtheintercomfunction,thesystemwill
prioritisetheincomingcall andendanyinternalcall. FortheInnerCall functionto work,all receivers
that arein thesamehousemust usethe same User ID.Use“V” to scroll the page. Calls not
answeredwillendwithin 30seconds ifnotanswered.
Do Not Disturb
If you do not want to be disturbed for example at night, you can activate the Do Not Disturb function.
Note: The indicator changes to GREEN to indicate that the Do Not Disturb function is ON. The
indicator is GREY when the function is OFF. When the function is turned ON, you will not receive
any calls.
General settings
Ring tone setting
Theringcalltonecanbesetindividuallyto distinguishdifferentcallingsources. Thereareatotal of
12 ring tones to choosefrom.
1. SelectSettings fromtheMain Menu.
2. SelecttheRing tone buttononthescreen.
3. Use“<<” or “>>” to scrollthrougheachringtone.
Note: All doorentrypanelringtonesmustbethesame(1/2/3/4) to work.Toexit,presstheHome
button.

Ring tone volume
The ringcalltonevolumecanbe increasedor decreasedas requiredwithin the rangeof zero to
nine.
1. SelectSettings fromtheMain Menu.
2. Press theRing tone volume.
3. Use“<<” or “>>” to adjustthevolumelevels.
Note: Settingthe volumeto0 will mutethe receiver anditwillnot ringforany incomingcall. To exit,
press theHomebutton.
Setting screen time
After 30secondsofinactivity,thescreenwillturn off.This settingcanbeadjustedas neededby
choosingbetweenarangeof sixseconds andupto 10minutes.
1. SelectSettings fromtheMain Menu.
2. Press theScreen time button.
3. Useup and down arrows to scrollthroughthetimesetting.
Intercom function
The intercomfunctioncan beenabledor disabledas required.
1. SelectSettings fromtheMain Menu.
2. Press the Intercom functionbutton.
3. Togglethebuttonsto GREENto turnONtheintercomfunction.
4. Alternatively,togglethebuttontoGREYto turn OFFtheintercomfunction.

Note: By default, theIntercomfunctionis turnedON.
Restoring thedefault settings
To restorethefactorydefaultsettings,followbelowsteps.
1. SelectSettings fromtheMain Menu.
2. Press the Restorebutton.
3. Press the Restorebuttononthesidemenu.
4. Press the Checkbutton to confirm,alternativelyifyouwantto Cancel,pressthe Xbutton.
Note: Thesystemwillsoundabeep whentherestoreto factorysettingshasfinished.
Installermenu
To enter theInstaller menu,followbelow steps.
1. SelectSettings fromtheMain Menu.
2. Press and hold for three seconds theUnlockkeybutton.
3. On thekeypad,typetheinstallercodeaccordingto belowtable.

Setting code numberand definition
Codenumber
Description
Codenumber
Description
2419
Resetto default
8016-8017
Reserved
2500-2549
Reserved
8018-8020
Video format
8000-8003
Primary/secondaryreceiver
8401-8499
Unlock time
8004-8005
Enableconciergeunit
8505-8520
Reserved
8006-8007
Panel ON/OFF
9017-9018
Reserved
8008-8009
Date mode
9030-9031
Reserved
8010-8011
Unlock mode:Close/Open
9101-9104
Door entry panelquantity
8012-8013
Timemode:12hours/24hours
9200-9216
Cameraquantity
Conciergeunit
A receivercanbeused as aconciergeunitto thesystem.Followbelowstepsto enablethis
function.
1. SelectSettings fromtheMain Menu.
2. Press and holdfor 3 secondsthe Unlockkeybutton.
3. On thekeypad,type
a. 8004 to enabletheconciergefunctiononthemonitor.
b. 8005 to disabletheconciergefunctiononthemonitor.
Date and timeformat
Theformatofthedateortimecan besetin two ways.Followbelowstepsto changetheformatof
the dateor time.
1. SelectSettings fromtheMain Menu.
2. Press and holdfor threeseconds the Unlockkeybutton.
3. On thekeypad,type
a. 8008 to usethedateformatmonth/day/year.
b. 8009 to usethedateformatday/month/year.
c. 8012 to usethetimeformatof12hours.
d. 8013 to usethetimeformatof24hours.

Unlockmode
Therearetwo unlock modes,normallyopenmodeor 0 (default) andnormally closemode or 1.To
changefollowbelowsteps:
1. SelectSettings fromtheMain Menu.
2. Press and holdfor threeseconds the Unlockkeybutton.
3. On thekeypad,type
a. 8010 to setunlockmodeto normallyopenmodeor0.
b. 8011 to setunlockmodeto normallyclosemodeor1.
Unlocktime
Theunlocktimeofthelockreleasecanbeadjusted atany timebetween therangeof onesecond
and 99seconds.Followbelowstepsto adjusttheunlocktime:
1. SelectSettings fromtheMain Menu.
2. Press and holdfor threeseconds the Unlockkeybutton.
3. On thekeypad,type8401for onesecond~8499for 99seconds to setthe unlocktime.
Setting theusercode
On the ATIGO system,everyreceiver must have assigned an identificationcodecalledUserCode.
DIP Switch addresses
The DIPswitchesare used to set theuser codefor eachmonitorandmaximumare 6Bits.
•Bit-1~ Bit-5areused for addressing.Thevaluerangeis from0to 31,a total of32different
codesfor 32monitors.
•Bit-6is BUSline terminalswitch,whichshouldbesetto ON for the last monitoron theBUS
line,otherwiseshouldbeOFF.
NOTE:Whenmulti-monitorsareinstalledinthesameapartment,thesemonitorsshouldusethe
samecodeandtheprimary/secondary modeshouldbesetonthemonitor.
Use below reference table for setting the receiver User Code as required:

Specifications
Power supply
20~28V DC
Power consumption
Standby 0.25W;Working5W
Monitor screen
7” digital colour TFT
Displayresolutions
800 x480 pixels
Video signal
1Vp-p,75Ohm,CCIRstandard
Wiring
2-wires nonpolarised
Dimensions
161 x174 x 22 mm (Hx W x D)
Precautions
1. All componentsshould beprotectedfromvibrations andnot suffer anyimpact.
2. Pleaseclean thescreenwithasoftcottonclothwithoutusinganyorganicorchemical
cleaningagent.Ifnecessary,pleaseuseas littleas possiblewaterordilutesoapinto
waterto clean thedust.
3. Image distortion may occur if the monitor is mounted too close to magnetic fields like TV’s
microwaves,computers,etc.
4. Pleasekeep away fromhightemperatures,dust,oxidationorwaterto avoiddamage.
5. Pleasepay attentionto thehighvoltagesusedby thisproductandreferto atrainedor
qualified professionalfor anyassistance.