Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL2-1458
131
TWO
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
SPECIFICATIONS (UL RATING)
Models: AP-15TU, AP-15TUC, AP-15TUCR
Power Rating: 15 Watts continuous
Frequency Response: 400-4,000 Hz
Sensitivity: 102dB at 15 watts, 10ft
(3dB increment UL Rating)
SPECIFICATIONS (ANECHOIC MEASUREMENTS)
Frequency Response: 400-14,000 Hz (Nominal)
500 - 6,000 Hz (± 5dB)
Sensitivity: 120dB at 15 watts (peak) / 1 Meter
116dB at 15 watts / 1 Meter (avg) 500-6,000 Hz
106dB 1 Watt / 1 Meter (avg) 500-6,000 Hz
Dispersion Angle: 70° (-6dB, 2000 Hz octave band)
Weight: AP-15TU = 4.0 lbs (1.8kgs)
AP-15TUC(R) = 4.5 lbs. (2.0kgs)
Finish: AP-15TU(C) = Grey baked epoxy
AP-15TUCR = Red baked epoxy
UL LISTED 15-WATT OMNI-PURPOSE®
VOICE CONTROL LOUDSPEAKERS
AP-15TU
AP-15TUC
AP-15TUCR
AP-15TU(C) Series
FEATURES
• 15-Watt High Efficiency Compression Driver
• Built-In Vari-Tap®Transformer for Easy Impedance Selection
• Optional 5 mfd Capacitor for Line Supervision
• Omni-Purpose Surface Mounting Bracket For Precise Positioning
• Vandal-Resistant, Weatherproof Construction
• Recommended for High Intelligibility Paging, Intercommunication,
and Signaling
APPLICATIONS
Atlas Sound’s UL Listed AP Series loudspeakers are surface-mount-
ing, high-efficiency units for life safety and communication system
applications. When used with compatible control equipment, they pro-
vide high-intelligibility voice reproduction and signal transmission for
indoor or outdoor emergency alarm, protective signaling and intercom
system installations.
GENERAL DESCRIPTION
Atlas Sound AP Series Omni-Purpose loudspeakers are equipped
with a compression driver providing up to 15 watts RMS power
handling capability, superior intelligibility and dispersion to achieve
maximum sound projection and penetration.
Weather-resistant metal construction and re-entrant acoustic path
assure protection against water, humidity, vermin and corrosion. The
Omni-Purpose®mounting bracket allows directional sound dispersion
via vertical and horizontal positioning. Provisions are also included for
surface or strap mounting to pillars and I-beams.
All models include a built-in 25/70.7V Vari-Tap®transformer featuring
a screw-driver adjustable, 7-position watt/impedance selection switch.
Wiring terminals are protected with a vandal-resistant adapter cover
for control equipment utilizing cable or conduit.
A built-in, 5 mfd capacitor is provided on Model AP-15TUC(R) for line
supervision. Model AP-15TU is not equipped with a capacitor.
All models meet or exceed the UL Listed standards for audible signal
appliances and are capable of operating within an ambient temp.
range of 66°C (150°F) to -35°C (-30°F). Models comply with UL
Standard 1480—Speakers for Fire Protective Signaling Systems and
California State Fire Marshal (Title 19). Models with special modifica-
tions to meet New York City MEA (Calendar no. 57-74-SA) and UL
Canada are also available as standard product. Contact Factory.
ARCHITECT AND ENGINEER SPECIFICATIONS
Voice control loudspeaker shall be Atlas Sound Model ______ (AP-
15TU, AP-15TUC, AP-15TUCR). Weather-resistant unit shall be con-
structed of heavy-gauge, treated aluminum. Loudspeaker shall be able
to operate within any ambient temperature environment ranging from
66°C (150°F) to -35°C (-30°F). Model shall be a double re-entrant type
with 15 watts RMS audio power rating compression driver producing a
UL-rated sound pressure level of 102dB measured at 15 watts, 10ft.
(3dB increment rating) within a frequency range of 400 Hz to 4 kHz.
Impedance shall be 8 ohms and sound dispersion 70°. Unit shall have
impedance selection via 7-position switch of 5000, 2500, 1300, 666,
333, 89 and 45 ohms. Power taps shall be available at 1, 2, 3.8, 7.5, 15
watts for 70V line and .48, .94, 1.8, 7.5, 15 watts for 25V line.
Loudspeaker assembly shall be furnished with mounting bracket allow-
ing adjustment on either a vertical or horizontal plane with a single lock-
ing pin and including provisions for mounting, banding, or strapping.
Wiring terminals for amplifier output shall be fully enclosed and a van-
dal-resistant adapter cover shall provide connection facilities for cable or
conduit. Dimensions: 77⁄8" W x 83⁄4" H x 95⁄16" D (200 x 222 x 237mm).
Unit shall be finished in gray or red baked epoxy.
ACCESSORIES
BX-2A. Vandal Resistant Cover Plate for Armored
Cable and Conduit Connection. Constructed
of Cast Aluminum.
APXB-G. Optional mounting base for a standard 1-gang
APXB-N. 2-gang, or 4" sq. E.O. box. (G-Grey, N-Neutral)
