ATOMI Smart Kettle User manual

Can’t connect? Need help?
WE
CAN
HELP
DO NOT RETURN THIS
PRODUCT TO THE STORE
Sma Kele
Wi-Fi
User Manual
Date Code: 01/19
Call 1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)
or email suppo@atomiusa.com
Watch Video
Open your smaphone camera
and point it at the QR Code
Download Free APP

IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed to reduce the riskof fire, electric
shock, and / or injury to persons, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. Do not touch hot suaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord,
plug, or power base in water or other liquid.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use and before cleaning.
Allow to cool before puing on or taking o pas, and
before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or
plug or aer the appliance malfunctions or has been
damaged in any manner.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or
touch heated suaces.
9. Do not place on or near a hot gas or electric burner or
in a heated oven.
10. Do not move an appliance containing hot liquids.
Allow to cool before moving.
11. Do not use appliance for other than intended use.
12. This Sma Kele has been designed specifically for the
purpose of boiling drinking qualitywater only. Under no
circumstances should this product be used to boil any
other liquids or foodstus.
1 2
13. To disconnect, remove plug from wall outlet.
14. The use of accessory aachments are not
recommended by the manufacturer as it may
cause injuries.
15.Keep 6 inches clear from the wall and 6 inches
clear on all sides.
16. The Sma Kele must be used only with the power
base supplied.
17. Do not move the Sma Kele while it is switched on.
18.Do not open the lid during operation.
19. Do not oveill the Sma Kele past the maximum
water level mark. If the kele is oveilled, boiling
water may be ejected.
20.Use caution when pouring water from the Sma
Kele, as boiling water and steam will scald. Do not
pour water too quickly.
SAVE THESE INSTRUCTIONS
NOTE: This appliance is for HOUSEHOLD USE ONLY.
• Some counteop and table suaces are not
designed to withstand the prolonged heat generated
by ceain appliances. Do not set the heated unit on a
finished wood table. We recommend placing a hot
pad or trivet under your carafe to prevent possible
damage to the suace.
• During initial use of this appliance, some slight smoke
and/or odor may be detected. This is normal with
many heating appliances and will not recur aer a
few uses.

Thankyou for purchasing
the atomi Sma Kele
Brew the peect cup of tea or prepare any
hot beverage anywhere with the atomi
Sma Kele. Set weekly schedules, turn
your Sma Kele on and o automatically,
and much more.
Cleaning your Sma Kele
before its first use
It is recommended that before first use to fill
Sma Kele with cold tap water at the maximum
level, and boil by selecting the power buon or
the boil buon on the atomi sma app, then
discard the water.
Sma Kele will only operate when positioned on
the power base. The kele will automatically
switch o when the water has reached the
selected temperature. The Sma Kele is not
dishwasher safe. Hand clean only.
We recommend the use of filtered water for the
best taste experience.
Before you begin
1. Know your Wi-Fi network and password
2. Make sure your mobile device is running iOS®
8 or higher or Android™ 4.1× or higher
3. Make sure you’re connected to a 2.4GHz
Wi-Fi network (atomi Sma can’t connect to
5GHz networks)
Inside the box you’ll find:
3 4
When using electrical appliances, basic safety precautions
should always be followed to reduce the riskof fire, electric
shock, and / or injury to persons, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. Do not touch hot suaces. Use handles or knobs.
3. To protect against electrical shock, do not immerse cord,
plug, or power base in water or other liquid.
4. Close supervision is necessary when any appliance is
used by or near children.
5. Unplug from outlet when not in use and before cleaning.
Allow to cool before puing on or taking o pas, and
before cleaning the appliance.
6. Do not operate any appliance with a damaged cord or
plug or aer the appliance malfunctions or has been
damaged in any manner.
7. Do not use outdoors.
8. Do not let cord hang over edge of table or counter or
touch heated suaces.
9. Do not place on or near a hot gas or electric burner or
in a heated oven.
10. Do not move an appliance containing hot liquids.
Allow to cool before moving.
11. Do not use appliance for other than intended use.
12. This Sma Kele has been designed specifically for the
purpose of boiling drinking qualitywater only. Under no
circumstances should this product be used to boil any
other liquids or foodstus.
13. To disconnect, remove plug from wall outlet.
14. The use of accessory aachments are not
recommended by the manufacturer as it may
cause injuries.
15.Keep 6 inches clear from the wall and 6 inches
clear on all sides.
16. The Sma Kele must be used only with the power
base supplied.
17. Do not move the Sma Kele while it is switched on.
18.Do not open the lid during operation.
19. Do not oveill the Sma Kele past the maximum
water level mark. If the kele is oveilled, boiling
water may be ejected.
20.Use caution when pouring water from the Sma
Kele, as boiling water and steam will scald. Do not
pour water too quickly.
NOTE: This appliance is for HOUSEHOLD USE ONLY.
• Some counteop and table suaces are not
designed to withstand the prolonged heat generated
by ceain appliances. Do not set the heated unit on a
finished wood table. We recommend placing a hot
pad or trivet under your carafe to prevent possible
damage to the suace.
• During initial use of this appliance, some slight smoke
and/or odor may be detected. This is normal with
many heating appliances and will not recur aer a
few uses.
Specifications:
Input: 125V-60Hz 10A1250W (Resistive)
Power Base
Sma Kele

Plug your atomi Sma Kele into
any standard outlet.
1. Know your Wi-Fi network and password
2. Make sure your mobile device is running iOS®
8 or higher or Android™ 4.1× or higher
3. Make sure you’re connected to a 2.4GHz
Wi-Fi network (atomi Sma can’t connect to
5GHz networks)
Step 1:
Plug in
5 6
Step 2:
Download App
Download the atomi sma app from
the App Store or Google Play.

Step 3:
Register
Enter your mobile phone
number or email address.
Enter the verification
code and create
a password.
Log into
the app.
7 8

Step 4:
Add Device
Select “Add Device”
or click (+) at the top
right corner of the
devices screen.
Choose
“Sma Kele”
from the
device list.
Hold the power buon for 10 seconds until
the indicator lights blinks rapidly , then press
“Continue” on the atomi sma app.
910

Enter your Wi-Fi
network and
password.
The atomi sma
app will connect
your device.
12
Controls
Schedule
Set a schedule
of when to boil.
ON/OFF
Sta and
pause boil.
Temperature
Displays current
kele water
temperature.
The control panel oers four dierent
seings for optimal tea and coee brewing.
Mild
130°
Coee
180°
Boil
max
Te a
160°
11

13 14
Cleaning and maintaining
your Sma Kele
Daily Cleaning
Always unplug the Sma Coee maker and allow
to cool before cleaning.
• Clean the kele jug with a so cloth. Ensure the outside
of the kele is always dry before use.
• Do not get any water near the underside of the kele,
power base or anyelectrical components.
• Never use abrasive cleansers, steel wool pads or other
abrasive materials.
Descaling
It is essential that regular descaling takes place.
Frequencywill depend on the usage of the kele
and the hardness of the water in your area.
1. Fill the kele with an equal pa solution of water and
white vinegar, let this soak for an hour.
2. Once the hour is up, just boil the kele. Then, empty the
kele and rinse it thoroughly.
Heating water manually
Press the power buon on the Sma Kele to sta
boiling. The indicator light will glow during the cycle and
will turn o when ready.
Scheduling
You can set up your Sma Kele to
sta boiling at specific times on
specific days of the week.
Save
Confirm and
save schedule.
Switch
Set preferred
state (ON/OFF).
Repeat
Set preferred
days to repeat
schedule.
Time
Set preferred
scheduled time.

Daily Cleaning
Always unplug the Sma Coee maker and allow
to cool before cleaning.
• Clean the kele jug with a so cloth. Ensure the outside
of the kele is always dry before use.
• Do not get any water near the underside of the kele,
power base or anyelectrical components.
• Never use abrasive cleansers, steel wool pads or other
abrasive materials.
Troubleshooting
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during
the Wi-Fi setup. Checkwhether there are problems with
your internet connection. If the Wi-Fi signal is too weak,
reset your Wi-Fi router and try again.
The Sma Kele will not turn on.
Sma Kele will only operate when positioned on the
power base. Make sure Sma Kele is properly positioned
on the power base. Make sure Sma Kele is plugged in
and turned on.
The Sma Kele will not heat to the selected temperature.
Check if there is a limescale build up inside the Sma Kele
as this may aect the kele’s peormance. We recommend
descaling the Sma Kele and to reset the kele to its
default seings.
Descaling
It is essential that regular descaling takes place.
Frequencywill depend on the usage of the kele
and the hardness of the water in your area.
1. Fill the kele with an equal pa solution of water and
white vinegar, let this soak for an hour.
2. Once the hour is up, just boil the kele. Then, empty the
kele and rinse it thoroughly.
15 16
I’m still having trouble!
Wi-Fi networks come in a lot of shapes and sizes with many
quirks of their own. It doesn’t mean your Sma Kele is
malfunctioning. If problems persist, please try these steps,
in order:
1. Force quit and re-launch the atomi sma app.
Checkto see if this fixes the issue.
2. Unplug Sma Kele and plug it back in.
Check to see if this fixes the issue.
3. Unplug your router and plug it back in.
Check to see if this fixes the issue.
4. Delete and reinstall the atomi app.
Check to see if this fixes the issue.
5. If all else fails, restore your Sma Kele to factory
seings: First, unplug your Sma Kele. Plug it back
in and hold the power buon for 10 seconds.
Setup is not working properly.
1. Close all apps that are running in the background then
re-open the atomi sma app.
2. Uninstall and reinstall the atomi sma app then repeat
the setup process.
Why does my Sma Kele smell like something is burning?
It is possible that a new Sma Kele will produce an odor
when first used. This is normal and should go away aer
the Sma Kele has been used for a while.

17 18
FCC Notice:
This device complies with Pa15 of the FCC Rules. Operation is
subject to the two following conditions:
1. This device may not cause harmful inteerence.
2. This device must accept any inteerence received,
including inteerence that may cause undesired operation.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Pa 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful inteerence in a
residential installation.
CAUTION: Suitable for indoor use only.
DO NOT IMMERSE IN WATER. DO NOT EXCEED RATED
CA PAC I TY.
Made in China
For questions or concerns, email us at suppo@atomiusa.com
Manufactured and marketed byAtomi, Inc.
10 West 33rd St. Suite 520, New York, NY 10001 atomi™ is a
trademark of Atomi, Inc.
Designed by atomi in New York. Made in China
One-year limited warrantyfrom date of purchase against
defects in materials and workmanship. Google is a trademark
of Google LLC. Amazon, Alexa and all related logos are
trademarks of Amazon.com, Inc. or its aliates.
I’m still having trouble!
Wi-Fi networks come in a lot of shapes and sizes with many
quirks of their own. It doesn’t mean your Sma Kele is
malfunctioning. If problems persist, please try these steps,
in order:
1. Force quit and re-launch the atomi sma app.
Checkto see if this fixes the issue.
2. Unplug Sma Kele and plug it back in.
Check to see if this fixes the issue.
3. Unplug your router and plug it back in.
Check to see if this fixes the issue.
4. Delete and reinstall the atomi app.
Check to see if this fixes the issue.
5. If all else fails, restore your Sma Kele to factory
seings: First, unplug your Sma Kele. Plug it back
in and hold the power buon for 10 seconds.
Setup is not working properly.
1. Close all apps that are running in the background then
re-open the atomi sma app.
2. Uninstall and reinstall the atomi sma app then repeat
the setup process.
Table of contents