***Thank you for using professional stage light. Please note that this product, as all the others in
the rich my company range, has been designed and made with total quality to ensure excellent
performance and best meet your expectations and requirements.
***Please carefully read this user manual in its entirety and keep it safe for future reference. It is
essential to know the information and comply with the instructions given in this manual to
ensure the fitting is installed, used and serviced or correctly and safely.
***My company disclaims all liability for damage to the fitting or to other property or persons
deriving from installation , use and maintenance that have not been carried out in conformity
with this user manual, which must always accompany the fitting. My company reserves the right
to modify the characteristics stated in this user manual at any time and without prior notice.
Light source: 100W LED white light module (new generation packaging technology, perfect
concentrating, super bright brightness)
Maximum power: 200W
Power supply: Wide voltage input switching power supply 100V-240V 50-60Hz
Color temperature: 6500K
Lamp life: 50000 hours
Control mode: DMX512 signal input, automatic operation
Channel mode: 16CH/20CH
X/Y scan: horizontal 540°, vertical: 270°
Color: 13 color patches + pure white light, and an independent 6 color palette, can achieve the
pattern rainbow effect
Fixed pattern: 11 fixed patterns + white light, dithering effect
Atomizing mirror: atomizing soft mirror
Dimming: 0-100% linear dimming
Strobe: Synchronous pulse strobe, random pulse strobe
Prism disk: double prism effect, one 16 prism, one 8 prism, two-way rotation effect
Beam angle: 2°
Focusing: the pattern can be adjusted freely
Display: color LCD display, Chinese and English display, reverse display
The system has an RDM function to remotely modify the address code.
Efficient heat pipe cooling system, no risk of lamp damage
Protection level: IP20
Menu Operation
On the base of the control panel offers a number of features, such as setting DMX fixture address,
switch the lamp, run the test program, the mode selection.