ATTE IPUPS-5-11-XL2 User manual

User Manual
Code: IPUPS-5-11-XL2
POE SWITCH WITH BUFFERED POWER SUPPLY IPUPS-5-11-XL2 5-PORT ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2021-06-07 IPUPS-5-11-XL2 1/5
Warning!
Please read the user manual included in this work as it contains important information related with safety of installation and use of
the device.
Only persons who read the user manual may use the device.
The user manual must be kept because it may be required in the future. The device is to be used exclusively for purposes specified
in this user manual.
The device must be unpacked prior to starting-up. After removing the packaging make sure the device is in working order.
If the product has defects, it should not be used until it is repaired.
The product is intended for use at home and commercial use and may not be used for other than intended use.
The manufacturer is not liable for damages resulting from not adhering to the rules contained in the user manual, therefore, we
recommend to follow the aforementioned safety rules for operation and maintenance of the device. In this way you will ensure
yourself safety and avoid causing damage to the device.
The manufacturer and the supplier are not liable for losses or damages arising out of the product, including financial or intangible
losses, loss of profits, income, data, pleasure from use of the product or other products related with it - indirect, incidental or
consequential loss or damage. The above provisions apply whether the loss or damage concerns:
1. Deterioration of quality or the lack of operation of the products or products related with it due to damage as well as the lack of
access to the product when it is undergoing repair, which results in stoppage the loss of user's time or a break in business activity;
2. Improper results of operation of the product or products related with it;
3. It applies to losses and damages according to any legal category, including negligence and other losses, termination of a
contract, expressed or implied guarantee and strict liability (even if the manufacturer or the supplier was notified about the
possibility of occurrence of such damages).
Safety measures:
Particular attention at designing was directed to quality standards of the device where ensuring safety of operation is the most
important factor.
The device must be secured against contact with caustic, staining and viscous fluids.
The device was designed in such a way that it restarts operation when power supply is restored after a break.
Attention! We recommend using protections to further protect the device from possible overvoltages in installations.
Surge protectors are effective protection against accidental pass to the device voltages higher than the rated. Damages
caused by pass the voltages higher than specified in manual, are not under warranty.
Turn off the device before transporting it.
Prior to connecting the device to a power source check whether the supplied voltage is consistent with rated voltage specified in
the user manual.
Proper product disposal:
A marking of a crossed out waste bin indicates that the product may not be disposed together with other household waste in the
entire EU. To avoid possible damage to the natural environment of health due to uncontrolled waste disposal, therefore, it should be
handed over for recycling, propagating in this way sustainable use of natural resources.
To return a worn-out product, use a collection and disposal system of this type of equipment or contact a seller from whom it was
purchased. He will then be recycled in an environmentally-friendly way.

User Manual
Code: IPUPS-5-11-XL2
POE SWITCH WITH BUFFERED POWER SUPPLY IPUPS-5-11-XL2 5-PORT ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2021-06-07 IPUPS-5-11-XL2 2/5
5-port PoE switch in an external enclosure with a buffered power supply. 5 ports
support Power over Ethernet (PoE) function.
The IPUPS-5-11-XL2 set consists of the XPOE-6-11-OF switch module, the
AUPS‑70‑120‑OF buffered power supply module and the ASUC-50-480-OF voltage
converter module enclosed in the ABOX-XL2 external enclosure with space for the
7Ah battery. The enclosure meets the IP56 tightness class and is equipped with
cable entries with glands in the 5 x M16 + 1 x M20 arrangement. The buffered PSU
is adapted to work with maintenance-free batteries (gel or AGM) with nominal
voltage 12V.
The LONG RANGE operation mode allows to increase the range of power and data
transmission for ports LAN 1 ... LAN 4 to 280m while limiting the network
bandwidth for these ports to 10Mbps.
Standards: IEEE 802.3af, IEEE 802.3at
Management via WWW / console:
LAN ports: • 1 x RJ45 10/100 Base-T - Uplink
• 5 x RJ45 10/100 Base-T, PoE 802.3af/at / Passive PoE
LED diodes: Power, LAN
Transmission speed: 10 / 100 Mbps : 1 Port LAN + 5 LAN & PoE ports
Maximal output power:
• 40 W @ Passive PoE - 1 ... 4 ports,
• 50 W @ Passive PoE - Port 5,
• 30 W @ PoE (802.3af/at) - 1 ... 5 ports
Maximal total power: 50 W
Operation modes: • Standard : 100 m @ 10/100 Mb/s - 1 ... 6 ports
• Long Range : 280 m @ 10 Mb/s - 1 ... 4 ports ; 100 m @ 10/100 Mb/s - 5, 6 ports

User Manual
Code: IPUPS-5-11-XL2
POE SWITCH WITH BUFFERED POWER SUPPLY IPUPS-5-11-XL2 5-PORT ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2021-06-07 IPUPS-5-11-XL2 3/5
Main features:
• The ability to independently turn on and off the PoE power for each of the LAN 1 ...
LAN 5 ports
• The modular design streamlines service tasks and enables quick and easy system
expansion
• The raster system of module assembly facilitates the expansion of the device by
further modules
• Place for battery : 12 V / 7 Ah
• Battery charging current : 1 A / 2 A - (set with the JP1 jumper)
• Technical outputs of the OC type signaling loss of voltage at the PSU output (OUF)
and loss of voltage in the 230V mains (ACF)
• Protection against deep discharge of the battery
• The ABOX-XL2 mounting enclosure is equipped with 6 cable entries with glands in
the 5 x M16 + 1 x M20 arrangement
Power supply: 230 V AC
Weight: 1.53 kg
Dimensions: 333 x 227 x 130 mm
Manufacturer / Brand: ATTE
Guarantee: 2 years
Internal view of the housing:

User Manual
Code: IPUPS-5-11-XL2
POE SWITCH WITH BUFFERED POWER SUPPLY IPUPS-5-11-XL2 5-PORT ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2021-06-07 IPUPS-5-11-XL2 4/5
Bottom view:

User Manual
Code: IPUPS-5-11-XL2
POE SWITCH WITH BUFFERED POWER SUPPLY IPUPS-5-11-XL2 5-PORT ATTE
DELTA-OPTI Monika Matysiak; https://www.delta.poznan.pl
POL; 60-713 Poznań; Graniczna 10
e-mail: [email protected]; tel: +(48) 61 864 69 60
2021-06-07 IPUPS-5-11-XL2 5/5
Mounting side view:
In the kit: