Audiocenter Artist t4 User manual

+Artist T-BOX40

ArtistCommercial Audio System SolutionRevision A3-2020-10User’s Manual

Safety precautionsWire connectionPoint source speaker installation dimensions and applicationColumn speaker installation dimensions and application Subwoofer installation dimensions and applicationSpecifications02030506101214AppearanceTrouble shooting03Contents07Line array speaker installation dimensions and application MANUALOFARTIST

Thank you for purchasing Audiocenter Artist-Pro audio system solution, which are professional speakers that integrated the latest technology and the best materials.Over the years of hard working, we have achieved the goal of excellence and built a perfect system for professionals.2Safety precautionsThere can be danger in any step during hanging installation. Everyone should check whether there is any damage on all hardware devices and pay attention to personal safety. All purchasers of Audiocenter should be professional people qualified to conduct the work related to such equipments.We strongly suggest the users pay full attention to local rules, regulations and laws. Installers have the responsibility to make sure the speaker installations are subject to local rules, regulations and laws.If any danger or defect is detected, measures should be taken immediately to correct it.In touring application, please choose the installation hardware and occasion that can sustain the weight of the equipments.Please do not try to hang speakers over the design standard.Please do not place the power cable near heating source. Do not over bend or damage the powercables. Do not place heavy things on it. Please do not place the cables that may be pressed orcause stumblingPlease do not place the speakers near equipments sensitive to magnet fields, such as CRTdisplayer, TV or data saving materials.Only the specified rated voltage should be used for this product. Please refer to the back panel of the product for the specified voltage.Only the supplied power cable or plug should be used. (lf you need to use the product in a place different from the purchase place, please consult your local Audiocenter distributor.)Please make sure to connect to proper power socket with protection grounding connection.Wrong grounding may cause short circuits. The product inside does not include any component that can be repaired by users. In case of abnormal operation, please stop using immediately, and contact qualified Audiocenter maintenance worker to repair.Please do not use the product in the rain, or near water, or in humid environment, to avoid liquidspilling to any opening.When any of the following situations occurs, please cut the power immediately, and pull out the power plug from the socket, and ask qualified Audiocenter maintenance worker to repair.-This equipment is fell or damaged.- Wear or damage of the power cable or plug.- Abnormal smell or smoking.-Some substance falls into the product.-Sound stops suddenly when using the product.When pulling out the power plug from the power socket or the product, please make sure to grab the plug instead of the power cable. Pulling the power cable directly may cause damage.If the product is not used for long time, or there is thunder storm, please pull out the plug from the socket.Please do not place the product in any uneven position. Otherwise, it may cause falling off suddenly.If the product is not fixed safely, please do not place it in a position that may cause easy falling.Please do not block the air hole vents. The product has air hole vents at the back to avoid internal temperature too high. Bad ventilation may cause damage to the product or even fire. Please do not hang or install any other component to the handle of the speaker. It may cause damage or injure. Please do not press the back panel of the product to the wall. Otherwise the plug may touch the wall and separate from the cable, and cause short circuits, malfunction, or even fire.Before connecting the product to other equipment, please turn off the power switch of all equipments. Before turning on or off the power switch of all equipments, please turn down the volume to the minimum.Please do not use the product in a very high or uncomfortable volume. Otherwise, it may cause permanent damage to your ear.In case of sound distortion, please do not use the product. To continue using the product in such status may cause fire.Using mobile phones near the speaker may cause noise. In case of noise, please use the mobile phone far from the speaker.If you need service, please contact Audiocenter service center, agent, or distributor in your area.Regularly check the power cord and plug.In order to avoid injury to you or others and loss on equipment or property, please make sure to follow above basic items.Dynamic Audio SolutionsPlease finish reading the manual before usage,to make sure the best performance of Artist Commercial Audio System.Please keep the manual for reference in the future.When you set up, install and use the Artist commercial audio system, please follow the following safety measures strictly:MANUALOFARTIST

3User's manualQuality CertificatePlease check above items carefully. If any questions, please advise Audiocenter representative, dealers, distributors, or contact by email box: support@ac-pro.net.Package accessories:SymptomPossible reasonsSolutionNo soundFeedback in the soundSound distortionNot enough SPL while full rangespeakers used together with subsSubs might be out of phaseCable not connected correctly Or too small gainMicrophone is toward the speakerSound is too highWrong preset usedDifferent gain for different speakersDifferent preset for different speakersSubwoofers are out phasePut the same gain for different speakersUse the same preset for different speakersMake the sub in phaseReduce the input volume of the equipmentsReduce the output gain of the speakers, making the Limiter LED lighter a bitKeep speakers out of themicrophone response areaLower the output gainCorrect with input socket correctlyAdjust speaker output gain into biggerAdjust the phase of subsInput volume is too bigOutput volume is too bigSound discrepancy from different speakersTrouble shootingPlease consult distributor if there are still problems. Artist applied Phoenix socket terminal, which is specially designed for speakers, mainly for safety and reliability. The positive and negative terminals in paralleling can be connected to another speaker. Wire connectionDynamic Audio SolutionsMANUALOFARTIST

4connectionTo ensure sound quality and minimum power consumption, it is necessary to select sufficiently thick cables according to the number of speakers per channel, speaker impedance, and cable length. The total impedance of a single group of parallel speakers is equal to the impedance of a single speaker divided by the number of speakers.Connection diagramArtist T3/TW8/TW118 Artist T4 Artist T6/T8 Artist TW28 Artist T43 Artist T83 Artist T65 Dynamic Audio SolutionsMANUALOFARTIST

5AppearanceDynamic Audio SolutionsArtist T3Artist T4Artist TW8Artist TW28Artist TW118Artist T6Artist T8Artist T83Artist T65Artist T43MANUALOFARTIST

Artist T3121mm133mm

138mm

Artist T4154mm159mm

174mm

When Artist T3 or T4 is used at constant voltage mode, it needs to be used with Artist T-Box40, which is an external transformer box for impedance and voltage output switch. One Artist T-Box40 can be used with up to 4 Artist T3 /T4 full-range speakers.Artist T-Box40 application+

94mm150mm

94mm83mm14mm10mmR=3mm24mm6Point source speaker installation dimensions and applicationWhen the knob at 4Ω, it is in the impedance output working mode. When the knob at (100V 40W/20W/10W, 70V 40W/20W/10W/5W), it is in the voltage output working mode.ΩT-BOX

Artist T-Box40MANUALOFARTIST

Horizontal angle adjustmentW02 Universal rotating bracketMaterial: steel; Surface treatment: black fine sand (white is optional)Artist T6344mm

277mm

218mm418mm

277mm

259mm

65°

0°

65°

Vertical angle adjustment

45°

Artist T87Dynamic Audio SolutionsLine array speaker installation dimensions and application MANUALOFARTIST

293mm

163mm

255mmR3.5mm163mm

50mm

133mmΦ11mm

196mm

367mm315mm250mmΦ11mmR3.5mm195.5mm

166mm

50mm

Artist T6 U-shaped wall mounting bracketArtist T8 U-shaped wall mounting bracket190mm

383mm

469mm48mm100mm79mm

50mm

47.5mm

47.5mmArtist T6 vertical hanging frameArtist T8 vertical hanging frameAccessories for line array wall mounting frame 1 Accessories for line array wall mounting frame 2 68mm

309mm

441mm312.5mm

140mm

120mm

2.5mm

160mm

8Vertical angle adjustment examples for Artist T6 / T8Dynamic Audio SolutionsMANUALOFARTIST

Line array wall mounting frame and accessoriesApplications examples for Artist wall mountingT6 / T8 line arrayApplications examples for Artist flying frame T6 / T8 9Dynamic Audio SolutionsMANUALOFARTIST

10Artist T83121mmT834Ω4Ω

Artist T43121mm82mmT438Ω8Ω

Artist T65Column speaker installation dimensions and applicationWhen the knob at 4Ω, it is in the impedance output working mode. When the knob at (100V 120W/ 60W/30W, 70V 120W/60W/30W/15W), it is in the voltage output working mode.When the knob at 4Ω, it is in the impedance output working mode. When the knob at (100V 120W/ 60W/30W, 70V 120W60W/30W15W ), it is in the voltage output working mode.Dynamic Audio SolutionsWhen the knob at 8Ω, it is in the impedance output working mode. When the knob at (100V 60W/ 30W/15W, 70V 60W/30W/15W/7.5W), it is in the voltage output working mode.MANUALOFARTIST

549mm

146mm

918mm

161mm

1077mm

184mm243mm

W03 vertical wall mounting bracket

150mm118mm

52mm76mm63mmW04 horizontal wall mounting bracketArtist T43Artist T83Artist T65Artist T43Artist T8386mm

133mm101mm

62mm

53mm

45°

45°45°

45°

11Dynamic Audio Solutions(Thefollowingthreemodelsare0°，2.5°，and5°adjustableequippedwiththebracket)MANUALOFARTISTApplication examples for W04 horizontal wall mounting bracket5°0°2.5°63mm

150mm

53mm

150mm