Audiovox CTX3200 User manual

-
TABLEOFCONTENTS
FEATURES AND OPTIONS . . . . . . . . . . . . . . . . . . . . . . . .6
GENERAL SPECIFICATIONS
. . . . . . . . . . . . . . . . . . . . . . . . . . . 7
TELEPHONE UNIT FUNCTIONS .....................8
BASIC OPERATION
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .I6
Turning the Unit On
r
To Store a Number in Memory
To Recall a Number from Memory
i
To Review the Prefix
Last Number Review
J
Display Own Telephone Number
Repertory Memory Scroll
Automatic Storing into a Vacant Memory Address
Secret Memory
To Lock the Unit
Automatic Lock (NAM Option)
To Unlock the Unit
Backlighting On/Off Control
Volume Control
MEMORY NAME TAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I4
,
To Enter Names using Alpha (Letters)
To Store Name with Phone Number
To Recall from Memory with Name
ALPHA SEARCH
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . ..I8
PLACING TELEPHONE CALLS .....................16
To Place a Call
I
If the Call Fails to Go Through
I
Automatic Redial (NAM Option)
Terminating a Call (Hanging Up)
To Receive Calls
,
To Place a Call with a Number in the Memory
911 Emergency Call (NAM Option)
Silent Incoming Calls
1
Any Digit Key Answering (NAM Option)
Automatic Answering
To Mute a Phone Conversation
-4
,
Call in Progress Protection
ONE TOUCH DIALING . . . . ..*..........................
19
To Store a Number into One Touch Memory
To Place a Call to a Number
in One Touch Memory
CALL RESTRICTIONS (NAM OPTION) .....‘...19
To Set Call Restricted Mode
To Exit Call Restriction Programming Mode
HANDS-FREE OPERATION (NAM OPTION) . ..20
END-TO-END SIGNALING .....
. . . . . . . . . . . . . . . . . . . . . . . . . 2I
Touch ToneTM from Memory
Link Dialing

SCRATCH-PAD DIALING .............................
.23
SCRATCH-PAD DIALING
WITHOUT KEYING TONES .......................
.23
DATA TRANSMISSION ................................
,24
Manual Mode
Automatic Mode
CALL TIME DISPLAY ....................................
25
To Display the Talk Time of the Last Call
To Display the Cumulative Talk Time
To Display the Number of Calls
To Clear the Timer
One Minute Beep (NAM Option)
A/B SYSTEM SELECTION..
...........................
.20
SYSTEM INHIBIT (NAM OPTION) ...............Z 7
MULTIPLE CITY REGISTRATION..................2 7
LAST RESCAN SID INDICATOR ....................2 7
RADIO FREQUENCY (RF)
CHANNEL INDICATOR
.............................
.23
AUTOMATIC
HORN ALERT (NAM OPTION) ..................2 8
AUTOMATIC
CALLS IN ABSENCE INDICATOR ...............2 9
SAFETY TIMER(NAM OPTION) ..................3 0
FUNCTION REVIEW
..................................
..3 0
IMPORTANT SAFETY INFORMATION .........3 1
WARNING..
...................................................
.31
Touch Tone’rM is a registered trade mark of AT&T.
AUDIOVOX
CELLULARCARTELEPHONE
Congratulations... By choosing the Audiovox CTX-
3200M cellular telephone, you have joined the thou-
sands of satisfied customers who are enjoying the
benefits and quality performance that only an
Audiovox cellular telephone can provide.
Your Audiovox CTX-3200M has been designed to
meet the same standards of quality that has made
Audiovox the leading supplier of cellular telephones
in the United States.
This fourth generation cellular telephone combines
the most advanced technology with the latest high
tech design to offer you even more enhanced features
than ever before.
The CTX-3200M can be converted into a transgorta-
ble phone with the addition of the optional accessory
TCT-400. In the transportable mode, the CTX-
3200M provides longer standby time than previous
models, making cellular communications even more
convenient.
The styling of the CTX-3200M is sleek and trim and
features a new mini transceiver. In addition, the CTX-
3200M cellular car telephone offers an outstanding
array of enhanced features such as one touch speed
dialing that enables you to dial your most frequently
called numbers with just one touch of a button. The
one touch dialing feature eliminates the four steps
normally required to make a call allowing you to
concentrate on the road; repertory dialing permits
you to store and recall up to 99 of your frequently
called numbers; a large, easy to read alpha numeric
display with alpha search that allows you to retrieve
telephone numbers by names or initials.
Your CTX-3200M also includes a RJll Jack that
allows your phone to be interfaced with a laptop
computer or facsimile machine; an auto answer fea-
ture that will automatically answer the phone after
the second ring allowing you to talk to the calling
party without touching the handset (in hands-free
mode)or with the any digit key answering feature,you
may answer your incoming calls by pressing any of
the digit keys on the keypad; and automatic number
storage which eliminates the problem of accidentally
writing over a previously stored number, by storing

numbers in the first vacant memory location.
The CTX-3200M also has multi-city registration,
which allows ryistration of your phone in multiple
cities and saves on costly roaming charges, and 911
emergency calling, even if your phone is in the locked
or restricted modes.
The flexible mounting system allows for the phone to
be installed in a second vehicle with the addition of
an optional second vehicle installation kit.
For all its high tech sophistication, the Audiovox
CTX-3200M Cellular Telephone is surprisingly easy
to use; with its built-in function review menu, you can
review at the touch of a button, what keys to use in
order to access the many different features.
And the Audiovox cellular car telephone is a no
nonsense, high quality instrument, rugged enough for
off-road use as well as high speed freeway vibration.
The following pages, which describe the unit’s func-
tions and many of its components, will help you to
make the easiest and most efficient use of the
Audiovox CTX-3200M cellular car telephone.
FEATURESANDOPTIONS
l Push Button Dialing
l Backlit Keypad and Display with ON/OFF Control
l Large Size Dot-matrix LCD Display
Status/Function Indicator
15-Digit Dial Number
Receiving Signal Strength Indicator
l Power up Name Tag
l Pre-set Dialing up to 16 Digits (32 Digits : NAM
Option)
l Extended Readability
l Last Digit Clear
l Digit Display Clear
l On-Hook Dialing
0911 Emergency Call in all modes
l Repertory Dialing : 16/80 Digits 99 Memories
*Repertory Memory Scroll
l Automatic Storing into a Vacant Memory Address
l Secret Memory
l Memory Name Tag
l Alpha Search
l Link Pre-set Dialing
l One Touch Dialing
0 Any Digit Key Answering (NAM Option)
blast Number Redial
l Automatic Redial (NAM Option)
blast Number Review
@Mute or Hold
l Call Restrictions (NAM Option)
l Silent Incoming Calls
l Scratch-Pad Dialing (with/without keying Tones)
l End-to-End Signaling
l Touch ToneTM from Memory
0Continuous DTMF from Keypad
*Call in Progress Protection
0 Automatic Answering
l AUX I/O JACK for Data Transmission
@Call Time Display (Five Functions)
l Hands-free Operation (NAM Option)
l Automatic Horn Alert (NAM Option)
l Automatic Calls in Absence Indicator
*Safety Timer (NAM Option)
0 Display Own Telephone Number
0Multiple A/B System Selection
0 System Inhibit (NAM Option)
0 Multiple City Registration
l Last Rescan SID Indicator
0 RF Channel Indicator
l Electronic Lock
l Automatic Lock (NAM Option)
0Function Review
0 Rear Seat Extension (Option)
0 Flexible Mounting
GENERAL SPECIFICATIONS
(subject to change without notice)
Frequency Range: 824 to 849 MHz Transmit
869 to 894 MHz Receive
Number of RF Channels: 832 Full Duplex
Channel Spacing: 30
kHz
Duplex Spacing: 45 MHz
Frequency Stability: f2.5 PPM
Operating Temperature: -30°C to
+ 60°C
Supply Voltage: 13.7 V DC*BO%, Negative Ground
Current Drain: approx. 1.5 A in use,
0.2A standby
Size: Transceiver:
26H X 210W X 150D(mm)
1.02H X 8.27W X 5.90D(inches)
Telephone Unit: 63H x 60W
X 200D(mm)
2.48H x 2.36W X 7.87D(inches)
Weight: Transceiver: approx. l.Okg(2.21lbs)
Telephone unit: approx.
0.4kg(O.@lbs)
RF Power Output: 3 watts (50 ohms)

TELEPHONEUNIT
FUNCTIONS
19) Power On/Off
Switch
(10) Send Key
ill) Alnha Key
(13) Function Key
(14) Recall Key
izo) SPEAKER -
121) MIC JACK -
.7) Alphanumeric
1)isplay
(X) one Touch
Dial Keys
Ii) Volume
\ Control Keys
(18) AuX I/O JACK
(IO) Digit Keys
(1)
(2)
(3)
(4)
(5)
3
(6)
(7)
(8)
(9)
,
00)
01)
02)
(13)
04)
05)
06)
/I’ d’ t
m ica or lights when a call is in prog-
ress
mSVC/ (no service) indicator lights when the
unit is in a non-coverage area.
/ . d’ t 1’ htin ica or lg s when the unit is out of
the home area.
-1 d’ t 1’ hin ica or lg ts when the unit is locked.
B is used as a POWER ON indicator which
lights when the unit is on.
RECEIVING SIGNAL STRENGTH INDICA-
TOR : The number of shaded blocks indicates
the Received Signal Strength.
&CHARACTER FUNCTIONAL ALPHA
NUMERIC DISPLAY :
The first 5 characters indicate current function
and status conditions.
The remaining 10 characters show the last 10
digits of the dialed number.
ONE TOUCH DIAL KEYS permit you to place a
call by a single key stroke.
!zzzz!3$off.
ower on/off switch) is used to turn
/SNDI (send key) for placing or receiving a call.
m (alpha key) shifts the digit keys to the
alphanumeric keys.
IEND( (end key) terminates a call.
JFUNC/ (function key) shifts the digit keys to the
functional keys.
m (recall key) recalls phone numbers from
repertory memory.
m (store key) stores phone numbers in reper-
tory memory.
/CLR/ (clear key) clears the digit(s) from the
display.
q , m (volume control keys) control Loud-
speaker and Earpiece audio level as well as Alert
tone.
q : Lower , a : Louder
AUX I/O JACK for Data Transmission.
DIGIT KEYS to enter a phone number.
Built in Loudspeaker
MICROPHONE JACK for HANDS-FREE.
9

BASIC OPERATION
Turning the Unit On
With the ignition switch at “ON” or “ACCESSORY”,
press m/ The indicator q will light (all indi-
cators will light momentarily; display will show the
programmed Name or your phone number, and a
tone will be heard).
l Signal Strength Indicator
The number of the shaded blocks indicates the Signal
Strength in your area. Four blocks show the maxi-
mum level. The display will vary as your car moves.
If the signal is not strong enough to place a call, the
-1’ d’ t m ica or will appear on the readout.
To Store a Number in Memory
1. Press m , then enter the phone number.
2. Press m , then enter the memory address (01
through 99).
Example: Press m, key q then q , the displayed
number will be stored into memory address 15.
Note: A Number of more than 16 digits can be stored
only into memory address 91 through 99.
To Recall a Number from Memory
Press m ,
then enter the memory address (01
through 99).
Example: Press m , key q then q , the number
stored in memory address 15 will be displayed
on the readout.
To Review the Prefix
(Number Longer than 10 digits)
After pressing JRCL/ , hold down the second digit of
the memory address.
Note: When a set of linked numbers is recalled, you
can review only the last linked number with
this feature. To review Link 1 to Link 5, use
jFUNCl , /RCL/ then key q (X is 1 to 5).See
“Link Dialing”.
Last Number Review
Press m , key q then q again, the last number
used will be displayed.
Display Own Telephone Number
You can see your own phone number on the readout.
Press RCL/ , key q then H again.
Repertory Memory Scroll
This feature is useful in finding a certain phone
number by scrolling the repertory memory from one
of the designated starting addresses.
Press /RCLI , key q then 1#1
q is the digit used to assign the starting address
as follows.
i 1 ring address
8
I
81
9
91
Press i#i or q
[#I : Scroll upward (with roll back to 01)
q : Scroll downward (with roll up to 99)
Memory address and the last 7 digits of the stored
number_@11 be displayed on the readout as fol-
lows.
Example: 131 11-j 1 /2]3]4]5]617/
WU
Address-No. Tel. No.
Note: In this scroll feature, any vacant memory
address will be skipped.
Automatic Storing into a Vacant
Memory Address
This feature allows automatic storing into a vacant
repertory memory address. This ends the possible
problem of writing over a previously stored number.
1. Enter the phone number.
2. Press ISTO/
3. Enter a memory address group number in which
you want to store a number.
i;
From 01 to 10
From 11 to 20
q : From 21 to 30
[#I:
From
81 to 90
From
91 to 99
From
01 to 99

4. Press q
The memory address and the last 7 digits of the
stored phone number will be displayed on the
readout as follows.
Example: 131 11-1 11213141516/f]
Note : If there is no vacant address in the assigned
area, the phone number will not be stored in
the memory.
Secret Memory
This feature allows you to store ID codes, telephone
credit card numbers, etc. in secret memory locations.
For security purposes, you must enter your three-
digit security code to display the secret number. For
practical use of the secret memory, refer to “END-
TO-END SIGNALING”.
To Store the Secret Number
1. Press m , then enter Secret Number.
2. Press /FUNGI , jm] , then enter the memory
address (01 through 99).
1 /s[EIcIRIEITI 1
will be displayed on
the readout.
Example: To store the secret number 9876 into
memory address 41 or automatically store this
number into a vacant memory address of 40’s.
1. Press ICLR/
2. Enter secret number
HEl~l3l.
/ /91817/61
3. Press -1 , m (secret memory store)
/ 191817161
4. Press Keys q , q (address number)
/ /sIEIc/R/EITI 1
or
press keys q , i#I (to store into a vacant
memory address of 40’s)
/4/i/-/s/EIc/R/EITI 1
To Confirm the Secret Number
1. Enter the three-digit security code.
2. Press m , then enter the memory address (01
through 99). The last 10 digits of the secret
number will be displayed on the readout.
Example: To confirm the secret number stored into
memory address 41.
1. Enter the three-digit security code
rI!Eml’
2. Press /RCL/ ,
Note: If you try
/ 11/2/3/
key q then q
j 1918/7161
to recall the secret memory without
the three-digit security code, the secret num-
ber will not be displayed. The call will not be
placed. The display will read as follows.
Press 1RCL/ , key q then q
j /sIE/cIRIE/TI J
or
Press m , key q then i#l
I~I~I--Js/EIcIR/EIT/ /
\ To Lock the Unit
Press /FUNC] , then key q (LOCK).
The /LOCK/ indicator lights. The unit will remain
locked until unlocked, even if the power is turned off.
Automatic Lock (NAM Option)
If you request the feature of Automatic Lock, your
NAM can be programmed so that your unit will
automatically go into the lock mode when the power
of the unit is turned “off”. When -1 is turned
“on”, the unlock code is required to operate the unit.
To Unlock the Unit
Enter the three-digit unlock code. The /LOCK] indica-
tor will go out when the three-digit code is the same
as the code registered in the NAM.
Backlighting On/Off Control
LCD display and the keypad are backlit automati-
cally after the Power-On. If needed, backlighting can
be turned off by pressing /RCL/ , key q then q .
Even if the unit is in the backlighting “Off” mode, the
backlighting will be turned on again automatically
for 10 seconds when any key operation is performed
or a call is received.
To return to the backlighting “On” mode, press /RCLI,
key q then q again.
Volume Control
The audio level of the loudspeaker, earpiece and the
alert tone can be adjusted by the Volume Control
keys ( q and q ).

@Loudspeaker: Leave the handset on the cradle:
To increas_Keep pressing q key until you get
the desired sound level.
To decrease-Keep pressing q key until you get
the desired sqmd level.
Sound level will be displayed on the readout digitally
during the level adjustment and the sample tone will
indicate the sound level when you are not engaged in
a telephone conversation. The display format is as
follows: SPK
[17 (1 to 10)
l Handset: Lift the handset and perform the same
manner as above.
In this case, the display format is as follows:
HS m (1 to 10)
l Alert Tone: Press m , key q then H
Then adjust the alert tone level in the same manner
as above. Your telephone will ring at the new level.
In this case, the display format is as follows :
ALT 117] (1 to 10)
MEMORYNAMETAG
This feature permits you to tag an identifying name
(up to 5 characters) to each phone number in the
memory address. The name will be displayed each
time you recall a number from memory address.
To Enter Names using Alpha (Letters)
1. Press [ml , lAlphal will appear on the readout
to indicate Alpha Mode is active.
2. Press digit keys repeatedly until the character you
need appears. The following table shows which
character is assigned to each digit key.
KEY
ASSIGNED ALPHA CHARACTERS
1
2 (ABC)
3 (DEF)
4 (GH I)
5(JKL)
6 (MNO)
7 (PRS)
8 (TUV)
9 (WXY)
0
*
#
(Blank)
A
D
G
J
M
P
T
W
0
*
#
1
c 2
F 3
I 4
L 5
0 6
R S 7
v 8
Y z 9
3. When the character you need is displayed, press
/ALPHI to move to the next space.
4. Go back to step 2, and repeat the same procedures
until the complete character name is displayed.
5. When an entry error is made, press ICLR/ momen-
tarily to erase the last character. If you press
m more than a second, all characters on the
readout will be erased.
To Store Name with Phone Number
1.
2.
3.
4.
1
Enter the phone number.
Press ml to set Alpha Mode.
Enter the name you need. (Refer to “To Enter
Names using Alpha”.)
Press JSTO/ , then enter the memory address (01
through 99), to store the number with the name
into memory.
Note: If you enter the phone number after entering
the name, the name will be erased.
Example: To store the phone number 123-4567 with
the name JOHN into memory address 15.
1. Enter the phone number ; m m Bi Fl p] F] pi
2. Set Alpha Mode; v]
3. Enter the Name; m jALPHl Fl p] Fl-1
(HI
WI
4. Store the Number; m m Fi
To Recall from Memory with Name
.
Recalling from the repertory memory with name is
identical to standard repertory recall. When the
number is recalled, the display will show the Alpha
Name Tag as well as the stored phone number.
ALPHASEARCH
This feature permits you to find a phone number
stored in the memory by the first character of the
Alpha Name Tag. This search can retrieve all
entries beginning with the assigned initial character.
1. Press m/ to set Alpha Mode.
2. Enter the initial character, by which you need to
search the phone number. Then press
m/
3. Press m , then 1#3
The display will show the first entry whose Name
Tag begins with the assigned initial character,
and which is stored in the lowest memory address.

Display shows Name Tag, Memory address and
Phone Number.
4. Press i#l or q
[#1 : Scroll memory address upward.
q : Scroll memory address downward.
Example :
Operation Display
/ALPHI
IAlIlplhia
I I I I I I I I I
pqim
/JI_l 1 /
pqF J 0 H N
/O/l/---j415
67 8 9 0
q
J A C K
10/5/-1716
54 3 2
1
q
JAMES
/1151--/g/8
76 5 4 3
1
1
PLACINGTELEPHONE
CALLS
To Place a Call
1. Enter the phone number with the handset on or off
the cradle. The last 15 digits of the dialed number
are displayed on the readout.
Note: After 120 sec., display will return to the
lo-digit display mode.
2. If a dialing error is made, press m , then enter
the phone number again. Pressing /CLRI momen-
tarily (less than approx. 0.5 sec.) clears only the
last digit.
3. Press m. The /I indicator will light. You
may lift the handset either before or after the
called party answers to proceed with your conver-
sation.
Note: If assigned in NAM, the phone number can
be preset up to 32 digits. However, in this
case it is necessary to confirm with system
operator whether such service is available
or not.
If the Call Fails to Go Through
1. If you hear the “reorder” signal, press /ENDI, then
if there were no dialing errors, press /SNDI for
redial. (Redialing with digit keys is not necessary.)
2. If the “intercept” signal is heard, press IEND/, then
redial the correct number.
Automatic Redial (NAM Option)
If the feature of Automatic Redial (NAM Option) is
selected, your unit will automatically make five
attempts to reach the cell site if the first try is not
successful. The (1 indicator will stay on, but
the speaker will be muted for twenty seconds.
This is done so that you do not hear the reorder
signals from the loudspeaker. If you need to termi-
nate the automatic redial, press IEND/
Terminating a Call (Hanging Up)
Press m , or replace the handset on the cradle.
The -1 indicator will go out.
If Hands-free is activated in NAM, you have to press
IEND/ to terminate a call
To Receive Calls
1. When the telephone rings, lift the handset or press
JSND/ to answer the call. The m indicator
will light.
2. If the handset is off the cradle when ringing starts,
press m to answer a call.
To Place a Call with a Number in the
Memory
1. Press /RCLI , then enter the memory address ( 01
through 99). The last 10 digits of the number will
appear on the readout. If the number is longer
than 10 digits, hold down the second digit of the
memory address (after pressing IRCL/ ) to see the
prefix.
Note: Refer to “To Recall a Number from
Memory” and “To Review the Prefix” for
more details.
2. Press m The -1 indicator will light as
the call is placed.
16

911 Emergency Call (NAM Option)
This feature permits you to place an emergency call
(911) even if your telephone unit has been set to the
Lock Mode or Call Restricted Mode.
Operation in Lock Mode
1. Enter the emergency call number (911); ~~~~[~~
(“911”is not indicated, but the -1 indicator
will light.)
2. Press /SNDI ,the 1-1 indicator will light.
3. To terminate the call, press m. (The -1
indicator will go out.)
Operation in Call Restriction Mode
The operation and display are the same as in the
normal mode.
Silent Incoming Calls
This feature alerts you visually of an incoming call
by flashing /CALL/ on the readout instead of hearing
the Alert Tone.
1.
2.
3.
4.
5.
Press lftCLl , key q then q .The IS. will
appear on the readout.
When a call is received, the unit indicates it by
flashing v/ on the readout without Alert
Tone.
Press ISND/ to answer the call.
m/ on the readout will go out.
This mode is deactivated by pressing m , key
q then q again.
If the Silent Incoming Calls is activated when the
unit is powered up, I] will appear on the
readout for 5 seconds.
Any Digit Key Answering
(NAM Option)
This feature permits you to answer an incoming call
by pressing any of the digit keys on the keypad.
Automatic Answering
With this feature, the incoming call will be automati-
cally connected for operation after two alert tones,
and the -1 indicator will light on the readout.
Then the unit is ready for Hands-free operation.
1. To activate this mode, press jtUNCl and then key
q . (A.Ansl will appear on the readout.
2. This mode is deactivated when IFUNC/ and then
key q are pressed again.
3. This feature will not function if the handset is off
the cradle or if the unit is in the following modes:
1) Locked
2) Automatic Horn Alert
3) Automatic Calls in Absence Indicator
4) Automatic Answer Fax Data
5) Silent Incoming Calls
4. If the Automatic Answering is activated when the
unit is powered up, vA.Ans will appear on the
readout for 5 seconds.
To Mute a Phone Conversation
Press -1, then key q II will appear
on the readout. Then the transmit audio will be
muted and the receive audio will be heard from
the loudspeaker. You may converse privately
with a passenger during a call with the handset on
or off the cradle.
To return to normal conversation, press vl ,
then key q again or lift the handset.
Mute is reset when call is terminated.
Call in Progress Protection
Phone conversation will continue until call is ter-
minated, even after ignition switch is turned off.
ONETOUCH DIALING
This feature permits you to place a call by a single
key stroke.
To Store a Number into One Touch
Memory
1. Press CLR/ , then enter a phone number.
2. Press /STO/ , then one of the three One Touch
Keys. Stored numbers can be reviewed by press-
ing /RCY then the One Touch Key you want to
review.
To Place a Call to a Number in
One Touch Memory
Press the One Touch Key for approx. 0.5sec..
The last 10 digits of the number will be displayed on
the readout, and the -1 indicator will light as
a call is placed.
CALLRESTRICTIONS
(NAM OPTION)
This feature permits you to impose various kinds of

restrictions on Outgoing Calls.
To Set Call Restricted Mode
Note: If you hear feedback on a bad RF Channel,
adjust the hands-free loop attenuation as fol-
lows.
Enter the three-digit security code, then press -1
, key i#l then q The following key operation is
needed to activate one of the restricted modes:
1) Press /FUNGI , key m then q Hands-free
loop attenuation will be increased by 14 dH.
2) To return to the normal condition. Dress
Only phone numbers having 11 digits or less are
accepted. Operator assisted dialing is prohibited.
Only phone numbers having 7 digits or less are
accepted. Operator assisted dialing is prohibited.
Operator assisted dialing (0 Origination) is pro-
hibited.
/FUNC/ , key q then q ’ ’
No phone calls can be placed except for re-
pertory dialing from memory address 01 to 09.
However, emergency call with “911” are availa-
ble.
Only One Touch dialing is permitted. However,
emergency call with “911” are available.
No restriction.
,.
.
END-TO-END SIGNALING
This feature permits you to utilize additional phone
services, such as accessing an alternate long distance
network, signaling a pager, or banking by phone etc..
For these services the signaling should be in DTMF
(Touch ToneTM). The following two features will
make it easier to send in DTMF codes.
Note: When you use this feature with a secret num-
ber, the number must be previously stored in a
To Exit C;au
fCestrlctlon
rrogramming
Mode
memory address. (Refer to “To Store the
Secret Number”.)
Press v] , then CLR/ Touch
ToneTM from Memory
Note(l): When in restricted mode 4 and 5, number
storage into the memory will not be permit-
ted.
Note(Z): In the restricted mode, a short beep tone will
be heard to inform you of the improper
operation, and the word -1 will be
shown on the readout.
.
DTMF signaling by repertory dialing is available
while engaged in a telephone conversation.
1.
Press p/ ml, then enter the repertory memory
address (01 through 99). The last 10 digits of the
number will appear on the readout.
HANDS-FREEOPERATION
(NAM OPTION)
2.
This feature permits you to engage in a conversation
without lifting the handset.
1. After receiving a call (press m to answer),
conduct the conversation via the hands-free
microphone with the handset on the cradle. To
converse more naturally:
a. Speak in a normal tone.
Note: However, if the memory address entered
has been set as a secret memory,
/ ]s/E\c/R]E/T~ /
will be
displayed on the readout instead of the
number.
Press m. Then DTMF signaling will be placed
and the DTMF tone can be monitored through the
loudspeaker.
Note: Continuous DTMF from keypad can be
manually dialed as well to access answer-
ing machines when engaged in a telephone
call.
b. Turn off the radio or stereo and close the car
windows.
2. To place a call, enter the phone number, then press
m The microphone will be turned on, ready
for conversation when your party answers.
3. After a call is completed, Press m to terminate
the call.
Link Dialing
(Includes Secret Memory Locations)
This feature permits you to preset from repertory
memory or the keypad up to five numbers before
placing a call. With this feature, the first number is
sent in digital form to the cell site. Then up to four

other numbers can be sent with DTMF signaling by
simply pressing m for each additional number.
Note(l):
Note(Z):
Nate(3):
Each number to be linked may be recalled
from memory or entered by keypad.
Each number to be linked should be within
16 digits including linking mark “=I’ at the
end.
Linked number can be stored in the mem-
ory. However, number of more than 16
digits should be stored into memory address
91 through 99.
Example: To access the alternate long distance ser-
vice using a secret number, you should call
your long distance service office first, and
enter your ID number, then the phone number
to be placed.
1. Recall the phone number of the long distance
service office.
Press m , then enter the memory address (01
through 99).
I I I I I I
\
I I I I I
17/4/6/3141719
2. Press /FUNGI , then key q
Linking Mark
“ = ” will be added at the end of the
number and vj will appear.
3. Recall your ID number stored in secret memory.
3-I. Enter the three-digit securitv code.
Press keys q , m, q _
iLlilnjki2
1 I I I I I IPPl3
Note: When you recall the ID number stored
without secret memory, omit step 3-l and
proceed to next step 3-2.
3-2. Recall your ID number.
Press /RCL/ , key q then q
/61711/4/81512
1 I (
4. Press -1 , then key q
ILjijnlkl2
/6j71lj4/8/5121=
5. Recall or dial the phone number to be called.
Press m , then enter the memory address (01
through 99) to recall the phone number to be
called.
_
[1/2/3]415/61718(9jO
Press m The /I indicator will light as
the call is placed. m will appear on the
readout.
jL/iinTS; 1
After you received an answer from the long dis-
tance service office, press m again. The DTMF
signal will be placed and the DTMF tone of your
ID number can be monitored through the
loudspeaker. Dnk] will appear on the readout.
If your ID number is accepted, the long distance
service office will answer again, so press m
Then the long distance call will be placed and the
DTMF tone can be monitored through the
loudspeaker.
-1 will appear on the readout.
Note: The number linked in steps 1 through 5 can
also be stored in secret memory as stated in
the “Secret Memory”.
1. When a set of linked numbers which
includes a secret number has been stored in
memory address, enter the three-digit secu-
rity code, press m , memory address,
and then m to place the call. -1
will appear on the readout, and the first
linked number will be called as shown in
step 6 above.
If the secret number is not included in the
linked number, you need not enter the
three-digit security code in the above oper-
ation.
2. To complete the call, continue operations
as shown in steps 7 and 8.
SCRATCH-PAD DIALING
This feature permits you to enter a number to be
redialed (or store a number in memory ) while
engaged in a conversation.
SCRATCH-PAD DIALING
WITHOUTKEYINGTONES
This feature permits you to activate scratch-pad
23

memory without annoying key tones over the circuit.
1. Press ml , then key q , then enter a phone
number. (Tone/ will be displayed for 5 seconds.
The Microphone circuit will remain active, but
the tones will not be heard.
2. If necessary, press /STOI , then enter the memory
address.
3. To exit the Scratch-pad Mode, press /FUNC/ ,then
key @ again or turn the unit off.
DATATRANSMISSION
AUX I/O JACK on the phone cradle can be used for
a FAX machine, Modem or other Data Transmitting
equipment. Specifications of AUX I/O JACK are as
follows.
JACK
: RJll
Impedance
: 600 ohms, Balance
Level
: Input nominal - 17dBV
: Output nominal -32dBV
Manual Mode
\To set Data Transmission Mode
After a call is in progress (answered or sent), press
IFUNC(\ , then m m will appear on the
readout. Then the transmission and receiving audio
will be switched to the AUX I/O JACK.
To Exit Data Transmission Mode
Press (FUNC/ , then m , or terminate a call.
The indication JDatal on the readout will go out.
Automatic Mode
1. Before leaving the car, press -1, then key q
(more than 1 second). The display shows (A.D/TI
The unit will remain power-on even after the igni-
tion switch is turned off. If necessary, lock the unit.
2. When a call is received, the unit will automatically
make the connection, then the transmit and
receive audio will be switched to the AUX I/O
JACK.
3. This mode is automatically deactivated in the
following cases:
1) When the ignition switch is turned back to
“on” or “accessory” position.
2) When the safety timer is expired. (Refer to
“Safety Timer”.)
3) When -1, then key q are pressed again.
4) When Calls in Absence Indicator feature is
activated.
24
CALLTIMEDISPLAY
This feature automatically records the elapsed time
per conversation. The talk time of the last call,
cumulative talk time, and the number of calls can be
displayed on the readout.
The timers can also be cleared if necessary.
With beep tones you can be notified of the approxi-
mate talk time (NAM Option) in approximately 60
second increments.
To Display the Talk Time of the Last Call
1. Press m , key @ then B
The talk time of the last call will be displayed on
the readout for 5 seconds.
While in a conversation, the talk time of a call in
progress will be displayed, and updated each sec-
ond. The display format is as follows.
-1 ...l min. and 25 sec.
To Display the Cumulative Talk Time
1. Press m , key @ then q
The cumulative talk time will be displayed on the
readout in minute format for 5 seconds.
-1 . ..18min.
To Display the Number of Calls
1. Press m, key @j then q
The number of calls will be displayed on the
readout for 5 seconds. The display format is as
follows.
-1 . ..Received or placed 86 calls
To Clear the Timer
1. Press (CLRI , then enter the three-digit security
code.
2. Press ISTO/ , key q then fl
The timers will be cleared, and the count for the
cumulative talk time and the number of calls will
start from zero.
One Minute Beep (NAM Option)
During conversation, you can be notified of the
approximate talk time by tones for the first five
minutes. (A short monotone signal will sound every
minute and a double beep tone will be heard after
approximately 5 minutes.)

A/BSYSTEMSELECTION
This feature permits you to select the system you
need to use. The system that you are registered with
is the preferred system, and your home system.
1. Standard Mode
When you turn the unit on, the unit remembers the
last position of the A/H system selected, and will
start to scan the radio frequency channels of that
selection.
If you want to confirm the current mode, press
-1, key q then q Status indicator shows
the current mode. To return the unit to the stan-
dard mode, press -1 , key q then q again.
Status indicator shows /STDI The unit will scan
the preferred system channels.
If unable to find an acceptable preferred channel,
the unit switches to scan the non-preferred chan-
nels.
2. Preferred System Only Mode
Press IFUNC/ , key q then q Status indicator
shows /PRFI The unit will scan the preferred
system only and prevents switching over to the
non-preferred system.
3. Non-preferred System Only Mode
Press jFUNCl , key q then q Status indicator
shows m/ The unit will scan the non-
preferred system only.
4. Home Only Mode
Press -1 , key q then q Status indicator
shows -1. You can place or receive calls only
within your home area.
Note(l): The -1 indicator lights as follows.
Lights continuously;
When the unit is in the preferred system
in another city.
Flashes;
When the unit is in the non-preferred
system.
Note(Z): The /NO] indicator flashes when the
unit is requesting service but not in the
requested service area.
L
SYSTEM INHIBIT
(NAM OPTION)
This feature permits you to inhibit (by NAM Option)
cellular systems, or Roam Systems you do not want
to use, even when in that service area.
The (NOI indicator flashes, if your A/B switch is
selected to any system that is inhibited.
MULTIPLE CITY
REGISTRATION
Some cellular users find it beneficial to register their
phone in multiple cities, rather than rely on “roam”.
The multiple city registration feature permits you to
reprogram from the handset, the different phone
numbers for the cities in which you are registered.
Each programmed phone number will be designated
as your home system.
Press /CLRI , then enter the new system ID number (5
digits) followed by the corresponding phone number
(10 digits). Please include your area code.
You must register your unit with the carrier in order
to get both the system ID number and your phone
number.
Press v/ then key q Your new phone number
will be displayed on the readout. (Holding down q ,
to display your new system ID number.)
Note(l): System ID number and phone number can
not be programmed during a call.
Note(2): Calls are placed or received using only the
programmed phone number, in use at the
time of call.
LAST RESCAN SID
INDICATOR
This feature permits you to recall the last system
identification accessed by your phone.
Press vi, key q then q
The last rescan SID is displayed on the readout for
5sec..The display format is as follows:
26

If the -1 indicator is on, the display will show
-----
RADIOFREQUENCY
CHANNELINDICATOR
If necessary, you can see the RF channel number in
which your unit is operating.
1. Press m, key q then q
The RF channel number, RSSI, SAT color code,
and transmitting power level will be displayed on
the readont. The display format is as follows:
[R-r1 18171
Cl1 12-13
,P/2i
lS,O,
__._
(J23...
RF channel number
R187.., RSSI value
S@..... SAT color code
P2......
Transmitting power level
2. When on a call, the display will update when a
handoff occurs.
3. The display will remain on the readout until you
manually reset it by pressing any key.
AUTOMATIC
HORN ALERT
(NAM OPTION)
This feature, when wired to the vehicle, indicates the
incoming call by sounding the horn or by flashing the
lights. When on, the Automatic Horn Alert will
automatically set each time that the car ignition is
turned off.
1. Press jFUNC1 , then key q momentarily. I]
will appear on the display and the Automatic
Horn Alert mode will be on. Each time the igni-
tion is turned off, this feature will be set automati-
cally.
2. When a call is received, the unit will either sound
the horn or flash the lights five times, depending
on how the horn alert wire has been connected to
the car.
3. This mode will be off in the following cases :
1) When WC] and then key m are pressed
again.
2) When the Calls in Absence Indicator mode is
set.
4. This feature is deactivated in the following cases:
1) By turning the ignition to on or accessory
position.
2) When the safety timer expires.
Note(l): Deactivate this mode if it is not being used
as this feature remains activated even if
the power source is turned off.
Note(Z):
The power source is automatically turned
off to prevent the discharge of the car
battery when the safety timer expires,
AUTOMATIC
CALLS IN ABSENCE
INDICATOR
This feature indicates the number of incoming calls
while you are out of the car. When the Automatic
Calls in Absence Indicator is on, it will be activated
when the ignition is turned off.
1.
2.
4.
5.
6.
Press -1, then key q II will appear in
the display. However, this mode is not activated
unless the ignition switch is turned off.
Turn the ignition switch off and leave the tele-
phone switch on. If necessary, lock the unit.
When calls are received, the unit will indicate
them by flashing /CALL] and m (XX being the
number of calls) alternately in the display.
This mode will be off in the following cases :
1) When -1 and then key q are pressed
again.
2) When the Automatic Horn Alert is set.
3) When the Auto Answer Fax Data is set.
This feature is deactivated in the folowing cases:
1) By turning the ignition to on or accessory
position.
2) When the safety timer expires.
The [m and m will continue flashing until
any key is pressed or the handset is lifted.
Note(i):
Note@):
Deactivate this mode if it is not being used
as this feature remains activated even if
the power source is turned off.
The power source is automatically turned
off to prevent the discharge of the car
battery when the safety timer expires.
28

SAFETYTIMER
IMPORTANTSAFETY
INFORMATION
(NAM OPTION)
Your timer is set for 8 hours. You can change it from
1 hour up to 31 hours for Horn Alert, Calls in Absence
Indicator and Automatic Mode of Data Transmission
features.
FUNCTION REVIEW
This feature shows you which numbered keys to use
for different FLJNC/RCL key functions.
To review the function menu:
Press -1 for about one second.
Scroll the menu up or down, using the q or q
key respectively.
The display information will appear as follows.
DISPLAY FUNCTION
[Lock I [FUNC 1 ]Lock
[Horn I
FUNC 2 <ls]Horn
[A.D/Tl
FUNC 2 >l s]Auto. Data Transmission
[Call ] FUNC 3 INumber of Calls in Absence
Indication
[A. Ans]
FUNC 5
IAutomatic Answering
[I
Mute 1 FUNC 8
IMute
[’
Tone ] FUNC 9
IDTMF Tone Mute
ABsys] FUNC 0 0 4
IA/B System Selection
HF ] LFUNC 7 1~ 2 IHands-free Adjustment
Timer] [RCL X l-3 ]Call Timer
RF CH] [RCL * 4
]RF Channel Indication
Light] [RCL X 5
IBacklighting Control
Alert] [RCL SC 6
IAlert Volume Control
C
Silen] [RCL * 7
ISilent Incoming Calls
[R. SID] [RCL Jc 9 ILast Rescan SID Indication
[( ID) ] [RCL ** IPresent SIDH+Phone Number
[Data ] [ FUNC SND IManual Data Transmission
[ Set r t ] [ FUNC ST0 N]Secret Memory
[Restr] [XYZ FUNC#7]Call Restricted Mode
[ ID ] [<ID>FUNC 6 IMultiple City Registration
Note (1) : N = Repertory Memory Address
(01 through 99)
Note (2%: XYZ = Three-digit Security Code
Note (3) : <ID> =System ID number+Own
Phone Number
Please read and follow these cautions carefully:
TURN OFF your unit in an explosive atmosphere
(near a fuel pump, blasting area, etc.).
DO NOT operate your unit when someone is within
two feet (0.6 meters) of your antenna.
DO NOT dial when your vehicle is moving in states
where this action is illegal (this is not a prudent
practice, even where it is legal).
DO NOT permit untrained personnel to operate the
unit.
WARNING
The following offenses can be punished by fine,
imprisonment, or both:
musing obscene, indecent or profane language.
musing the unit to give off false distress calls.
l Wiretapping or otherwise intercepting a telephone
call unless that person has first obtained the con-
sent of the parties participating in the call.
l Making anonymous calls to annoy, harass or
molest other people.
l Charging to an account without authorization to
avoid payment for service.
l Refusing to yield a party line when informed that it
is needed for an emergency call (It is also unlawful
to take over a party line by stating falsely that it is
needed for an emergency).