Aurora Multimedia ASP12H User manual

ASP-12H
1x2 HDMI 1.3
Distribution Amplifier
User Manual
Manual Number: 110701

~ 1 ~
Safety and Notice
The ASP-12H 1x2 HDMI 1.3 Distribution Amplifier with EDID Manager has been tested for conformance to safety
regulations and requirements, and has been certified forinternational use. However, like allelectronic equipments, the
ASP-12H should be used with care. Please read and follow the safety instructions to protectyourself from possible injury
and to minimize the risk of damage to the unit.
Follow allinstructions and warnings marked on this unit.
Do not attempt to service this unit yourself,exceptwhere explained in this manual.
Provide proper ventilation and air circulation and do notuse near water.
Keep objects that might damage the device and assure thatthe placementof this unit is on a stable surface.
Use only the power adapter and power cords and connection cables designed for this unit.
Do not use liquid or aerosol cleaners to clean this unit.Always unplug the power to the device before cleaning.

~ 2 ~
The ASP-12H 1x2 HDMI 1.3 Distribution Amplifier with EDID Manager provides the most robust,
cost effective and advanced HDMI 1.3 splitter solution in the market, by which the high definition video
and high quality audio can be transmitted to 2 different locations without losing quality. With automatic
EDID learning, the ASP-12H will effectively avoid HDMI compatibility issues and offer the best HDMI
support for HDMI splitters. It is compatible with PC resolutions up to 1920*1200@60Hz, 1080P, 2k and
also supports HDTV.
With 12-bit deep color video and high definition audio support, ASP-12H is suitable for high quality
A/V broadcasting, digital signage and education applications.
Features
HDMI 1.3c and DVI 1.0 compliant
HDCP 1.2 compliant
340MHz (up to 16 bit Y-U-V 444 supported @ 1080P)
Video bandwidth: 10.2Gbps
Front panel LED indicator shows the user the system & switching information
Supports conversion of HDMI signaling to DVI
Built-in Gain compensation and synchronization signal proofread technology
Resolution up to 1080p or WUXGA[1920x1200@60]
Automatic EDID learning
Supports x.v.YCC, x.v.Color & Deep Color
Supports CEC bypassing communication channel
Supports Dolby Digital, DTS-HD and Dolby TrueHD audio formats
Wall-mount housing design for easy installation
Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the
content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming
HDMI source players.
Introduction

~ 3 ~
Specifications & Package Contents
Model Name
ASP-12H
Technical
Role of usage
1x2 DistributionAmplifier (Splitter)
HDMIcompliance
HDMI 1.3c [Deep Color, xvYCC color space supported]
DVIcompliance
DVI 1.1
HDCPcompliance
Yes
Video bandwidth
Single-link 340MHz [10.2Gbps]
Video support
Up to WUXGA[1920x1200@60Hz] &UXGA[1600x1200@60Hz]
Audio support
DTS-HD MasterAudio, Dolby TrueHD
Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
[1] Human body model — ±19kV [air-gap discharge] & ±12kV[contactdischarge]
[2]Core chipset— ±2kV
EDID capacity
Auto
CEC Channel
Bypassing
InputTMDS signal
1.2 Volts [peak-to-peak]
InputDDC signal
5 Volts [peak-to-peak,TTL]
Input
1x HDMI [7.1ch audio &video]
Output
2x HDMI [7.1ch audio & video]
HDMIconnector
TypeA[19-pin female]
Mechanical
ASP-12H
Housing
Metal enclosure
Dimensions
(Lx W x H)
Model
W90xH27xD58mm
Package
Carton
Weight
Model
.3Kg [.7 lbs]
Package
Fixedness
Wall-mounting case
Power supply
5V DC
Power consumption
2 Watts [max]
Operation temperature
0~40
°
C [32~104
°
F]
Storage temperature
-20~60
°
C [-4~140
°
F]
Relative humidity
10~90% RH [no condensation]
Package Contents
1xASP-12H
1x 5V power supply unit
1x User Manual

~ 4 ~
Front/Rear Panel
1. HDMI IN: HDMI input source
2. HDMI OUT: distributed HDMIoutputs
3. Power: LED lightmeans power is on
5. +5V DC power jack: connect to 5V power supply unit
When the connected HDMI monitor is verified as HDMI and HDCP compliant, the corresponding LED
will blink.
Panel Descriptions

~ 5 ~
Broadcasts HDMI signal to 2 HDMI displays!
1.Switch off all devices,including monitors.
2.Connect to the receivers.
3.Connectan HDMI source (such as a Blu-ray Disc player) to the HDMI In.
4.Plug in 5V DC power supply unit.
5.Power on the HDMI monitors.
6.Power on the HDMI source.
Hardware Installation

~ 6 ~
1. While connecting a new monitor to the splitter, experiencing a shortperiod oftime no display may be expected.
Automatic EDID learning will analyze the newly connected monitor to see ifthe EDID for the HDMI inputis necessary
to update!
2. For long range high definition HDMI transmission applications, please adoptCAT5/6 cable based HDMI extenders.
Notice

~ 7 ~
Aurora Multimedia Corp. (“Manufacturer”) warrants that this product is free of defects in both materials and
workmanship for a period of 3 years as defined herein for parts and labor from date of purchase. Motorized
mechanical parts (Hard Drives, DVD, etc), mechanical parts (buttons, doors, etc), remotes and cables are
covered for a period of 1 year. Batteries are not covered by this warranty. During the warranty period, and
upon proof of purchase, the product will be repaired or replaced (with same or similar model) at our option
without charge for parts or labor for the specified product warranty period.
This warranty shall not apply if any of the following:
A) The product has been damaged by negligence, accident, lightning, water, act-of-God or mishandling; or,
B) The product has not been operated in accordance with procedures specified in operating instructions: or,
C) The product has been repaired and or altered by other than manufacturer or authorized service center; or,
D) The product's original serial number has been modified or removed: or,
E) External equipment other than supplied by manufacturer, in determination of manufacturer, shall have
affected the performance, safety or reliability of the product.
F) Part(s) are no longer available for product.
In the event that the product needs repair or replacement during the specified warranty period, product
should be shipped back to Manufacturer at Purchaser's expense. Repaired or replaced product shall be
returned to Purchaser by standard shipping methods at Manufacturer's discretion. Express shipping will be
at the expense of the Purchaser. If Purchaser resides outside the contiguous US, return shipping shall be at
Purchaser's expense.
No other warranty, express or implied other than Manufacturer's shall apply.
Manufacturer does not assume any responsibility for consequential damages, expenses or loss of revenue or
property, inconvenience or interruption in operation experienced by the customer due to a malfunction of
the purchased equipment. No warranty service performed on any product shall extend the applicable
warranty period.
This warranty does not cover damage to the equipment during shipping and Manufacturer assumes no
responsibility for such damage.
This product warranty extends to the original purchaser only and will be null and void upon any assignment
or transfer.
Aurora Multimedia Corp.
205 Commercial Court, Morganville, NJ 07751
Phone: [phone] Fax: [phone]
www.auroramultimedia.com
Limited 3 Year Warranty