REFER ALSO TO MAIN
INSTALLATION INSTRUCTIONS
FOR AV/VC ONE
AVS/021/SMK1PARTS INCLUDED:
Installation Instructions for
AV/VC One Screen Mount Kit
VESA Rail x2 Hex Nut x2
Washer x4
Screw x2
IMPORTANT NOTE
For dual screen installations you
will require 2x AVS/021/SMK1
Screen Frame
WARNING
• Single screen installation: 80” max size. 60kg (132lbs) max weight.
• Dual screen installation: 65” max size. 60kg (132lbs) max weight.
• Use with products heavier than the maximum weights indicated may result
in instability causing possible injury.
• Correct installation is essential to safe and reliable operation of the
AV/VC One product and falls outside the scope of responsibility
of Colebrook Bosson Saunders. Please follow assembly instructions carefully.
• Do not use this product for any purpose other than that for which it
was designed.
• Ensure that oor or wall surface is strong enough to support the weight of
the fully-loaded AV/VC One and that the oor surface is at and level.
• Do not install AV/VC One outdoors or in environments where it will be
directly exposed to moisture or highwinds.
• Follow the manufacturer’s guidance for mounting of monitors, displays
and other equipment.
• Please take care to avoid trapping ngers when installing or adjusting
the product.
AVS-021-SMK1-INST-A-MAY 2016
AVS/021/SMK1
ELECTRICAL SAFETY
• Safe installation of electrical equipment is the responsibility of the installer.
• Colebrook Bosson Saunders recommends that only double-insulated
electrical equipment and cables are installed in AV/VC One unit.
MAINTENANCE AND INSPECTION
• Ensure all screws and xings are fully tightened and occasionally re-tighten if necessary.
• Clean with a dampcloth. DO NOT use solvents.
DISCLAIMER
As part of Colebrook Bosson Saunders ongoing product improvement
programme, the design of products may change without prior notice and
details may vary from those illustrated.
VESA xing kit
