Avaya Sun Fire V880 User manual

Avaya Call Management System
Sun Fire V880/V890 Computer
Connectivity Diagram
Material ID 700224173
May 2005

© 2005 Avaya Inc.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this
document was complete and accurate at the time of printing, Avaya Inc.
can assume no liability for any errors. Changes and corrections to the
information in this document may be incorporated in future releases.
Documentation disclaimer
Avaya Inc. is not responsible for any modifications, additions, or deletions
to the original published version of this documentation unless such
modifications, additions, or deletions were performed by Avaya.
Customer and/or End User agree to indemnify and hold harmless Avaya,
Avaya's agents, servants and employees against all claims, lawsuits,
demands and judgments arising out of, or in connection with, subsequent
modifications, additions or deletions to this documentation to the extent
made by the Customer or End User.
Link disclaimer
Avaya Inc. is not responsible for the contents or reliability of any linked
Web sites and does not necessarily endorse the products, services, or
information described or offered within them. We cannot guarantee that
these links will work all of the time and we have no control over the
availability of the linked pages.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer to your
sales agreement to establish the terms of the limited warranty. In
addition, Avaya’s standard warranty language, as well as information
regarding support for this product, while under warranty, is available
through the following Web site:
http://www.avaya.com/support
Preventing toll fraud
"Toll fraud" is the unauthorized use of your telecommunications system
by an unauthorized party (for example, anyone who is not a corporate
employee, agent, subcontractor, or person working on your company's
behalf). Be aware that there may be a risk of toll fraud associated with
your system and that, if toll fraud occurs, it can result in substantial
additional charges for your telecommunications services.
Avaya fraud intervention
If you suspect that you are being victimized by toll fraud and you need
technical assistance or support, call Technical Service Center Toll Fraud
Intervention Hotline at +1-800-643-2353 for the United States and
Canada. For additional support telephone numbers, see the Avaya Web
site:
http://www.avaya.com/support
Providing telecommunications security
Telecommunications security (of voice, data, and video communications)
is the prevention of any type of intrusion to (that is, either unauthorized or
malicious access to or use of) your company's telecommunications
equipment by some party.
Your company's "telecommunications equipment" includes both this
Avaya product and any other voice/data/video equipment that could be
accessed via this Avaya product (that is, "networked equipment").
An "outside party" is anyone who is not a corporate employee, agent,
subcontractor, or person working on your company's behalf. Whereas, a
"malicious party" is anyone (including someone who may be otherwise
authorized) who accesses your telecommunications equipment with
either malicious or mischievous intent.
Such intrusions may be either to/through synchronous (time-multiplexed
and/or circuit-based) or asynchronous (character-, message-, or
packet-based) equipment or interfaces for reasons of:
• Use (of capabilities special to the accessed equipment)
• Theft (such as, of intellectual property, financial assets, or
toll-facility access)
• Eavesdropping (privacy invasions to humans)
• Mischief (troubling, but apparently innocuous, tampering)
• Harm (such as harmful tampering, data loss or alteration,
regardless of motive or intent)
Be aware that there may be a risk of unauthorized intrusions associated
with your system and/or its networked equipment. Also realize that, if
such an intrusion should occur, it could result in a variety of losses to your
company (including, but not limited to, human and data privacy,
intellectual property, material assets, financial resources, labor costs, and
legal costs).
Your responsibility for your company's telecommunications
security
The final responsibility for securing both this system and its networked
equipment rests with you, an Avaya customer's system administrator,
your telecommunications peers, and your managers. Base the fulfillment
of your responsibility on acquired knowledge and resources from a
variety of sources, including, but not limited to:
• Installation documents
• System administration documents
• Security documents
• Hardware-/software-based security tools
• Shared information between you and your peers
• Telecommunications security experts
To prevent intrusions to your telecommunications equipment, you and
your peers should carefully program and configure:
• Your Avaya-provided telecommunications systems and their
interfaces
• Your Avaya-provided software applications, as well as their
underlying hardware/software platforms and interfaces
• Any other equipment networked to your Avaya products.
Trademarks
Avaya is a trademark of Avaya Inc.
All non-Avaya trademarks are the property of their respective owners.
Document ordering information:
Avaya Publications Center
Voice: +1-207-866-6701
1-800-457-1764 (Toll-free, U.S. and Canada only)
Fax: +1-207-626-7269
1-800-457-1764 (Toll-free, U.S. and Canada only)
Write: Globalware Solutions
200 Ward Hill Avenue
Haverhill, MA 01835 USA
Attention: Avaya Account Manager
Web: http://www.avaya.com/support
E-mail: tota[email protected]
Order: Document No. 700224173,
May 2005
For the most current versions of documentation, go to the Avaya support
Web site:
http://www.avaya.com/support
COMPAS
This document is also available from the COMPAS database. The
COMPAS ID for this document is 91852.
Avaya support
Avaya provides a telephone number for you to use to report problems or
to ask questions about your contact center. The support telephone
number is 1-800-242-2121 in the United States. For additional support
telephone numbers, see the Avaya Web site:
http://www.avaya.com/support

May 2005 3
Preparing for installation
This section contains the following information that will help you prepare for the computer
installation:
●Safety precautions on page 3
●System precautions on page 4
●Required tools on page 5
●Electrical specifications on page 5
●Physical specifications on page 6
●Service access specifications on page 6
!Important:
!Important:
Important: DO NOT install any internal hardware shipped with the Sun machine during
customer site assembly and power up. Any internal hardware shipped will
be installed under the direction of an Avaya CMS Provisioning Engineer at
the scheduled provisioning appointment time.
Safety precautions
For your protection, observe the following safety precautions when setting up your
equipment:
●Follow all cautions, warnings, and instructions that are marked on the equipment.
●Never push objects of any type through openings in the equipment. Objects might touch
dangerous voltage points or short out components, resulting in fire or an electric shock.
●When moving the computer, be careful not to unplug any power or data cables.
●Refer servicing of equipment to qualified personnel.
●To protect both yourself and the equipment, observe the following precautions.
Item Problem Precaution
Wrist or
foot strap
ESD Wear a conductive wrist strap or foot strap
when handling printed circuit boards.
Cover
panels
System
damage and
overheating
Reinstall all cabinet cover panels after you
perform any service work on the system.
Card slot
filler
panels
System
damage and
overheating
Ensure that a filler panel is installed on all
empty card slots.

4 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
System precautions
Ensure that the voltage and frequency of the power outlet that is used matches the
electrical rating labels on the equipment.
Wear antistatic wrist straps when handling any magnetic storage devices, CPU/Memory
boards, or other printed circuit boards.
The V880 computer has three autoranging power supplies that use nominal input voltages
of 100 to 240 V AC at 47 to 63 Hz. The V890 computer has three autoranging power
supplies that use nominal input voltages of 200 to 240 V AC at 47 to 63 Hz.
!WARNING:
WARNING: You cannot interchange power supplies between a V880 and V890
computer.
Sun products are designed to work with single-phase power systems that have a grounded
neutral conductor. To reduce the risk of electrical shock, do not plug Sun products into
another type of power source. Contact your facilities manager or qualified electrician if you
are unsure of what type of power is supplied to your building.
Avaya recommends that you use one of the following power schemes:
●For a V880, use two (2) 2KVA Uninterruptible Power Supplies (UPS) (or equivalent),
each powered by a nonswitched, dedicated, 15-amp circuit. Connect two of the power
supplies to one UPS, and the third power supply to the second UPS. The monitor and
external peripherals can also be connected to the second UPS.
●For a V890, use one 6KVA UPS (or equivalent), powered by a nonswitched,
dedicated, 15-amp circuit. Connect all of the power supplies to the UPS. The monitor
and external peripherals can also be connected to the UPS.
Note:
Note: If not using a UPS, connect each power supply to a nonswitched,
dedicated, 15-amp circuit. Connect the monitor and external peripherals to a
separate circuit.
Each of the following items require a separate power cord:
●Power supplies in the computer (3 power cords)
●External peripherals
●Monitor
!WARNING:
WARNING: Do not make mechanical or electrical modifications to the cabinet. Sun
Microsystems is not responsible for regulatory compliance of modified
cabinets.

May 2005 5
Required tools
You need the following tools to do the installation:
●Phillips #2 screwdriver
●Needle-nose pliers
●ESD grounding wrist strap
●Antistatic mat
Electrical specifications
Parameter
Value
V880 V890
Input
●Nominal voltage range
●Maximum current AC RMS
●AC operating range
●Nominal frequencies
●100-240 V AC, autoranging
●15.0 A @100 VAC
●90-264 V rms, 47-63Hz
●50 Hz or 60 Hz
●200-240 V AC, autoranging
●8.0 A @200 VAC
●180-264 V rms, 47-63Hz
●50 Hz or 60 Hz
Maximum DC power output 2240 W 2509 W
Maximum system AC power
consumption
3000 W 3200 W
Maximum system heat dissipation 10308 BTU/hr 10912 BTU/hr
Volt-ampere rating 1515 VA with 1120 Watt load
(PF=0.99)
2078 VA with 1629 Watt load
(PF=0.98)
Wall plug type
●United States
●Non-United States
●NEMA 5-15P
●Power cords must be
obtained locally
●NEMA 6-15P
●Power cords must be
obtained locally
CPU plug type IEC 320 IEC 320

6 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Physical specifications
Service access specifications
Parameter English value Metric value
Height (with casters) 28.1 inches 71.4 centimeters
Width 18.9 inches 48.0 centimeters
Depth 32.9 inches 83.6 centimeters
Weight (min-max)1
1. The actual weight depends on the installed options.
194-288 pounds 88-130.6 kilograms
Power cords 8.2 feet 2.5 meters
Parameter English value Metric value
Front1
1. 48 inches (122 centimeters) for rack mounted
systems.
36 inches 91 centimeters
Rear 36 inches 91 centimeters
Left 36 inches 91 centimeters
Right 36 inches 91 centimeters

May 2005 7
Front panel
The following figure shows the front of the computer with the disk drive door open.
Tape drive
Disk drive
slots
v880_front.cdr

8 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Back panel - V880
The following figure shows the back panel of the V880 computer. The slots designated for
optional ethernet cards can house the FastEthernet, Quad GigaSwift, or single Gigabit
ethernet cards.
(not used) (Graphics card)
(SunSwift or )Dual SCSI/Ethernet card, required
v880_rear_cards.cdr
Power supply 1 Power cord
strain relief ties
(Second ethernet card, optional)
(First HSI/P card, optional, R3V11 only)
(Third ethernet card, optional)
(Second HSI/P card, optional, R3V11 only)
(Not used)
(Reserved for future use)
(Fourth ethernet card, optional)

May 2005 9
Back panel - V890
The following figure shows the back panel of the V890 computer. The slots designated for
optional ethernet cards can house the Quad GigaSwift or single Gigabit ethernet cards.
(not used) (Fourth ethernet card, optional)
(Dual Ultra320 SCSI card, required)
V890_rear_cards.cdr
Power supply 1 Power cord
strain relief ties
(Graphics card, required)
(Not used)
(Not used)
(Not used)
()Quad GigaSwift card, required
(Second ethernet card, optional)
(Third ethernet card, optional)
ALOM card

10 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Setting up power
To set up the AC power:
1. Locate the key switch, insert the key, and turn the key switch to the Forced Off position.
See the following figure.
2. Connect the IEC 320 end of each power cord to the AC connector of each power
supply.
For installations outside the United States and Canada, obtain three power cords for
your local configuration.
3. Route the power cord through the strain-relief tie-wrap loop located to the right of the
supply. Tighten the tie-wrap to secure the connection.
4. Connect the power using one of the following schemes:
●For a V880, use two (2) 2KVA Uninterruptible Power Supplies (UPS) (or equivalent),
each powered by a nonswitched, dedicated, 15-amp circuit. Connect two of the
power supplies to one UPS, and the third power supply to the second UPS. The
monitor and external peripherals can also be connected to the second UPS.
●For a V890, use one 6KVA UPS (or equivalent), powered by a nonswitched,
dedicated, 15-amp circuit. Connect all of the power supplies to the UPS. The
monitor and external peripherals can also be connected to the UPS.
Note:
Note: If not using a UPS, connect each power supply to a nonswitched,
dedicated, 15-amp circuit. Connect the monitor and external peripherals to a
separate circuit.
!Important:
!Important:
Important: Do not turn on power at this time.

May 2005 11
Peripheral connectivity
The following figure shows in general how equipment is connected to the computer. The
callouts are described in Parts list on page 12.
!Important:
!Important:
Important: DO NOT install any internal hardware shipped with the Sun machine during
customer site assembly and power up. Any internal hardware shipped will
be installed under the direction of an Avaya CMS Provisioning Engineer at
the scheduled provisioning appointment time.
One HSI/P card is used
for up to four ACDs.
A second HSI/P card is
needed for five to eight ACDs.
Remote console
Black Box
RS-449 - RS-232
interface converter
Black Box
RS-449 - RS-232
interface converter
X.25 switch links (R3V11 only)
Network
hub NTS
External SCSI
tape drive
for data
migration only
Built-in
TPE Fast
Ethernet
Interface
Ethernet port for R7 and later switch links
(supports up to eight ACDs)
sunfire880conn.cdr
To serial terminals, printers, and
modems (R3V11 and earlier; R12
and later, permissive use only)
For detailed network hub and NTS
connectivity, see CMS Terminals,
Printers, and Modems
External SCSI devices
HSI/P
card
SCSI or
SCSI/Ethernet
card
Ethernet LAN connections
Keyboard
Mouse
System console USB
port
USB
port
Graphics
card
To customer
network for
CMS Supervisor,
network printers,
and LAN backup
Optional ethernet port (two cards maximum)
Ethernet
card
For detailed switch link connectivity, see
CMS Switch Connections, Administration,
and Troubleshooting
Monitor
Modem
Required telephone
line to remote
maintenance center
Serial
Port A
For detailed switch link connectivity, see
CMS Switch Connections, Administration,
and Troubleshooting
A
B
C
C
D
E
F
G
H
I
J
KL
M
N
O
P
AC power
SCSI port
Ethernet
port

12 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Parts list
The following table lists the parts that are required to connect most external devices to the
computer. For information about connecting terminals, printers, and modems to the
computer, see Avaya CMS Terminals, Printers, and Modems. For information about switch
connections for CMS, see Avaya Call Management System Switch Connections,
Administration, and Troubleshooting.
Connectivity
diagram call out
Material ID or part
of Material ID
Description
A1408128288 HSI/P card (V880 only; up to two may be installed)
B1HSI/P quad cable (V880 only; 1 per HSI/P card)
C407086818 RS-449 cable (V880 only; 10 feet, 3 meters)
D N/A2SunSwift card (V880 only), or
Dual FastEthernet and Dual SCSI card (V880 only), or
Dual Ultra320 SCSI card (V890 only)
E1700230105
700352933
700362403
FastEthernet 10/100 Mbps card (V880 only), or
Quad GigaSwift Ethernet card, or
Single Gigabit Ethernet card
F407086826 Category 5 UTP cable (10 feet, 3 meters)
G846362754 DB25-to-RJ45 ACU modem adapter
H846983039 10-wire modular cord (10 feet, 3 meters)
I846362770 RJ45-to-DB25 remote console adapter
J407633999
Varies
Sportster Model 839 33.6 remote console modem
Comsphere 3910 remote console modem
K1N/A2Graphics card
L1N/A2Monitor cable
M1N/A2Monitor
N1N/A2Monitor AC power cord
O1N/A2USB keyboard with cable
P1USB mouse with cable
1. Sun Microsystems provides maintenance sparing for these parts.
2. The comcode for this bundle changes regularly and may not be ordered for maintenance spares, so it is not
listed in the table. This bundle includes the processor, peripherals, and other equipment.

May 2005 13
Connecting the monitor, keyboard, and mouse
To connect the monitor, keyboard, and mouse to the computer:
1. Attach the monitor video cable to the graphics card. Tighten the thumbscrews to
secure the connection. See the following figure.
2. Connect the monitor power cord to an approved AC power outlet.
3. Attach the USB keyboard cable to one of the USB ports.
4. Attach the USB mouse cable to the other USB port.

14 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Connecting the remote console modem
The remote console modem allows personnel at a remote support center to dial in and
perform maintenance on the computer. The modem is a U.S. Robotics Sportster 33.6
Faxmodem, a Paradyne Comsphere 3910 modem, or a modem provided locally.
The following figure shows remote console modem connectivity.
.
To connect the remote console modem:
1. Connect the DB25-to-RJ45 ACU modem adapter (A) to the serial port on the back of
the computer.
2. Connect the 10-wire modular cord (B) to the modular end of the ACU modem
adapter (A).
3. Connect the other end of the 10-wire modular cord (B) to the modular end of the
RJ45-to-DB25 remote console adapter (C).
4. Connect the remote console adapter (C) to the RS-232C port on the modem. The
RS-232C port on the Comsphere 3910 is labeled "DTE1."
5. Connect the telephone line to the jack labeled "LINE" on the Sportster modem, or
labeled "DIAL" on the Comsphere 3910 modem.
6. Connect the power cable to the modem and plug the cable into a socket.
Do not turn on the power until instructed by provisioning personnel.
B
C
Modem
Telephone line
to remote
maintenance center
Key:
A = DB25-RJ45 ACU modem adapter
B = 10-wire modular cord
C = RJ45-DB25 remote console adapter
Serial
port
remote_console.cdr
A

May 2005 15
Connecting the switch link
Use either of the following two ways to connect the CMS computer to a switch:
●TCP/IP over a dedicated local area network (LAN) segment. A LAN connection is
supported for R7 and later switch releases, and is required for CMS R12 and later.
●X.25 protocol over a hard-wired or switched link. This is not supported for CMS R12 and
later.
One CMS computer can collect data from several switches. To the CMS computer, each
switch represents one ACD. You can have all switches connected using TCP/IP, all
switches connected using X.25 protocol (not supported for CMS R12 and later), or some
combination of the two protocols.
For detailed information about how to connect and administer the switch link, see Avaya
Call Management System Switch Connections, Administration, and Troubleshooting.

16 Avaya CMS Sun Fire V880/V890 Computer Connectivity Diagram
Other manuals for Sun Fire V880
2
This manual suits for next models
1
Table of contents
Other Avaya Desktop manuals
Popular Desktop manuals by other brands

Lenovo
Lenovo 7387 Hardware Maintenance Manual

Avalue Technology
Avalue Technology HPS-SRSU4A Quick reference guide

Acer
Acer Aspire M1610 Service guide

Sony
Sony VAIO Digital Studio PCV-RX790G specification

IEI Technology
IEI Technology TANK-860-HM86 Series user manual

Lenovo
Lenovo ThinkCentre Edge 62z Brochure & specs