Avaya 4000 Series Instruction Manual

Installing the Avaya Virtual Services
Platform 4000 VSP4450GTX-HT-PWR+
Release 4.0.40
NN46251-304
Issue 01.01
August 2014

Contents
Chapter 1: Introduction............................................................................................................ 3
Purpose.................................................................................................................................. 3
Related Resources.................................................................................................................. 3
Support.................................................................................................................................. 6
Chapter 2: New in this release................................................................................................. 8
Features................................................................................................................................. 8
Chapter 3: Hardware compatibility........................................................................................ 10
Platform power supplies......................................................................................................... 10
Supported optical devices ..................................................................................................... 11
Chapter 4: Installing the Avaya VSP 4000 4450GTX-HT-PWR+.......................................... 16
Installation fundamentals....................................................................................................... 16
Electrostatic discharge........................................................................................................... 16
Preventing electrostatic discharge damage........................................................................ 17
Preventing electrostatic damage in new cable installations................................................. 17
Environmental requirements................................................................................................... 18
Package contents.................................................................................................................. 19
Installing the Avaya Virtual Services Platform 4000 on a table or shelf....................................... 20
Installing the Avaya Virtual Services Platform 4000 in an equipment rack.................................. 20
Cable requirements for the Avaya Virtual Services Platform 4000.............................................. 22
Installation and removal of Small Form-factor Pluggable (SFP) transceivers.............................. 23
Installing SFP transceivers............................................................................................... 23
Removing SFP transceivers............................................................................................. 23
RJ-45 connector pin assignments........................................................................................... 24
Console port pin assignments................................................................................................ 24
Power specifications for the Avaya Virtual Services Platform 4000............................................ 25
Power specifications for Avaya VSP 4000 4450GTX-HT-PWR+ switch................................ 25
Avaya Virtual Services Platform power supply power specification............................................ 26
Installing the Avaya Virtual Services Platform 4000 power supply.............................................. 28
Connect AC power................................................................................................................ 29
Power cord specifications................................................................................................. 29
Connect power to the front panel...................................................................................... 30
Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000......................... 32
Front panel LEDs............................................................................................................ 32
Switch LED state indicators.............................................................................................. 33
Port LED state indicators................................................................................................. 34
Chapter 5: Translations of safety messages........................................................................ 36
2 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Chapter 1: Introduction
Purpose
This guide provides information and instructions to install a Virtual Services Platform 4000 (VSP
4000) 4450GTX-HT-PWR+ system.
Related Resources
Documentation
See Documentation Roadmap for Avaya Virtual Services Platform 4000 Series, (NN46251–100), for
a list of the documentation for this product.
Training
Ongoing product training is available. For more information or to register, you can access the Web
site at www.Avaya-learning.com.
Viewing Avaya Mentor videos
Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya
products.
About this task
Videos are available on the Avaya Support website, listed under the video document type, and on
the Avaya-run channel on YouTube.
Procedure
• To find videos on the Avaya Support website, go to support.avaya.com and perform one of the
following actions:
• In Search, type Avaya Mentor Videos to see a list of the available videos.
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 3
Comments? [email protected]

• In Search, type the product name. On the Search Results page, select Video in the
Content Type column on the left.
• To find the Avaya Mentor videos on YouTube, go to www.youtube.com/AvayaMentor and
perform one of the following actions:
• Enter a key word or key words in the Search Channel to search for a specific product or
topic.
• Scroll down Playlists, and click the name of a topic to see the available list of videos posted
on the website.
Note:
Videos are not available for all products.
Subscribing to e-notifications
Subscribe to e-notifications to receive an email notification when documents are added to or
changed on the Avaya Support website.
About this task
You can subscribe to different types of general notifications, for example, Product Correction
Notices (PCN), which apply to any product or a specific product. You can also subscribe to specific
types of documentation for a specific product, for example, Application & Technical Notes for
Ethernet Routing Switch 8800.
Procedure
1. In an Internet browser, go to https://support.avaya.com.
2. Type your username and password, and then click LOG IN.
3. Click MY PROFILE.
4. On the site toolbar, click your name, and then click E Notifications.
Introduction
4 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

5. In the GENERAL NOTIFICATIONS area, select the required documentation types, and then
click UPDATE.
6. Click OK.
7. In the PRODUCT NOTIFICATIONS area, click Add More Products.
8. Scroll through the list, and then select the product name.
9. Select a release version.
10. Select the check box next to the required documentation types.
Related Resources
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 5
Comments? [email protected]

11. Click Submit.
Support
Go to the Avaya Support website at http://support.avaya.com for the most up-to-date
documentation, product notices, and knowledge articles. You can also search for release notes,
downloads, and resolutions to issues. Use the online service request system to create a service
request. Chat with live agents to get answers to questions, or request an agent to connect you to a
support team if an issue requires additional expertise.
Searching a documentation collection
On the Avaya Support website, you can download the documentation library for a specific product
and software release to perform searches across an entire document collection. For example, you
can perform a single, simultaneous search across the collection to quickly find all occurrences of a
particular feature. Use this procedure to perform an index search of your documentation collection.
Before you begin
• Download the documentation collection zip file to your local computer.
• You must have Adobe Acrobat or Adobe Reader installed on your computer.
Procedure
1. Extract the document collection zip file into a folder.
2. Navigate to the folder that contains the extracted files and open the file named
<product_name_release>.pdx.
Introduction
6 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

3. In the Search dialog box, select the option In the index named
<product_name_release>.pdx.
4. Enter a search word or phrase.
5. Select any of the following to narrow your search:
• Whole Words Only
• Case-Sensitive
• Include Bookmarks
• Include Comments
6. Click Search.
The search results show the number of documents and instances found. You can sort the
search results by Relevance Ranking, Date Modified, Filename, or Location. The default is
Relevance Ranking.
Support
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 7
Comments? [email protected]

Chapter 2: New in this release
The following sections detail what is new in Installing the Avaya Virtual Services Platform 4000
VSP4450GTX-HT-PWR+, NN46251–304 for Release 4.0.40.
Features
This section provides information about feature-related changes.
VSP 4450GTX-HT-PWR+
Release 4.0.40 of the Avaya Virtual Services Platform 4000 Series introduces a new hardware
chassis, the VSP 4450GTX-HT-PWR+. This model is designed to withstand an environment with
high-temperature operating conditions. Optimal operating temperature inside the device is
maintained by five 12–volt fans that are speed controlled based on the temperature inside the
device.
The VSP 4450GTX-HT-PWR+ has the following features:
• 48 10/100/1000 BASE TX RJ-45 ports with 802.3at PoE+
Table 1: Maximum PoE+ wattage based on operating temperature
0°C to 50°C 50°C to 70°C
1 PSU 860 W 400 W
2 PSUs 1660 W 832 W
• Two shared small form-factor pluggable (SFP) ports and two 1–gigabit/10–gigabit SFP+ ports
• One field-replaceable 1000 W AC power supply unit (PSU)
It also supports the addition of a second field-replaceable AC PSU for redundancy or additional
PoE.
Note:
The 1000 W AC PSU uses the IEC 60320 C16 AC power cord connector.
For more information about the VSP 4450GTX-HT-PWR+ features, see Hardware compatibility on
page 10.
8 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

10 GigE Optics SFP+ transceivers
VSP 4000 Release 4.0.40 introduces support for the following high temperature tolerant 10 GigE
Optics small form factor pluggable plus (SFP+) transceivers:
• AA1403011-E6HT 10GBase–LR SFP+ (-5 °C to +85 °C) Ethernet Transceiver, connector type:
LC – 1310 nm SMF with a range up to 10 km
• AA1403015-E6HT 10GBase–SR SFP+ (0 °C to +85 °C) Ethernet Transceiver, connector type:
LC – 850 nm with a range up to 400 m (OM4)
Features
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 9
Comments? [email protected]

Chapter 3: Hardware compatibility
The following table describes the Avaya Virtual Services Platform 4000 Series hardware.
Table 2: Hardware
VSP 4000 model Description Part number
VSP 4450GTX-HT-PWR+ • 48 10/100/1000 BaseTX RJ-45 ports with
802.3at PoE+
• two shared SFP ports
• two SFP+ ports
• Base Software License
• one (of two) field replaceable 1000W PSUs
supplied with the chassis
EC4400A03-E6
• Same content as EC4800A78-E6 with a NA
power cord.
EC4400E03-E6
Platform power supplies
The Virtual Services Platform 4000 4450GTX-HT-PWR+ model supports two field-replaceable AC
power supplies. One power supply is supplied with the chassis.
You can install a redundant power supply to support load sharing or to provide power redundancy.
The following table describes the Avaya Virtual Services Platform 4000 compatible AC power
supplies and their part numbers (order codes). All the power supplies are EUED RoHS 5/6
compliant.
Note:
The 1000W AC power supply uses the IEC 60320 C16 AC power cord connector.
Use the order codes to order a replacement for the primary PSU or to order a redundant PSU for
your VSP 4000 system.
10 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Table 3: Power supply order codes
VSP 4000 PSU Usage Part number
(order code)
1000W AC POE+
power supply
For use in VSP 4000 4450GTX-HT-PWR+ model. EC4005?03-E6*
*Note: The seventh character (?) of the switch order number must be replaced with the proper letter to
indicate desired product nationalization. See the following for details:
“A”: No power cord included.
“E”: Includes North American power cord.
Supported optical devices
Use optical devices to achieve high bit-rate communications and long transmission distances. The
following section describes the supported optical devices on the VSP 4000 system.
Important:
Avaya branded SFP (1GigE) devices that are supported on the VSP 4850GTS can be used on
the VSP 4450GTX-HT-PWR+ switch as they are certified and qualified as high temperature
devices. However, if you use a non-high temperature SFP+ device, the device is logged as an
unsupported high temperature device.
Avaya recommends that you use Avaya branded SFP and SFP+ transceivers as they undergo
extensive qualification and testing. Avaya is not responsible for any problems that arise from
using non-Avaya branded SFP and SFP+ transceivers.
Small form factor (SFP) pluggable transceivers
SFPs are hot-swappable input and output enhancement components designed for use with Avaya
products to allow gigabit Ethernet ports to link with other gigabit Ethernet ports over various media
types.
You can use various SFP (1Gb/s) and SFP+ (10Gb/s) to attain different line rates and reaches. The
following table describes the SFPs including the reach provided by various SFPs.
This table is informational only—not all Avaya Ethernet switching and routing products support all
the SFPs listed here.
For more information about SFP and SFP+ transceivers, including technical specifications and
installation instructions, see Installing Transceivers and Optical components on the Avaya Virtual
Services Platform 4000 Series, NN46251-301.
Important:
The attainable cable length can vary depending on the quality of the fiber optic cable used.
Supported optical devices
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 11
Comments? [email protected]

Table 4: Supported SFP transceivers
Model ROHS product number Description
1000BASE-T AA1419043-E6 CAT5 UTP, up to 100 m. Because the
1000BASE-T device is all electrical, it does
not need DDI support.
1000BASE-SX DDI AA1419048-E6 850 nm
up to 275 m using 62.5 m MMF optic cable
up to 550 m using 50 μm MMF optic cable
1000BASE-LX DDI AA1419049-E6 1310 nm, up to 10 km
1000BASE-XD DDI AA1419050-E6 1310 nm, up to 40 km
This transceiver has been discontinued but
remains supported by the software.
AA1419051-E6 1550 nm, up to 40km (non-CWDM)
This transceiver has been discontinued but
remains supported by the software. Avaya
recommends AA1419057-E6 as a
replacement.
1000BASE-ZX DDI AA1419052-E6 1550 nm, up to 70 km (non-CWDM)
This transceiver has been discontinued but
remains supported by the software. Avaya
recommends AA1419065-E6 as a
replacement.
1000BASE-BX DDI AA1419069-E6 and
AA1419070-E6 mating
pair
One model transmits at 1310 nm and receives
at 1490 nm, while the mating model transmits
at 1490 nm and receives at 1310 nm.
The reach is up to 10km.
AA1419076-E6 and
AA1419077-E6 mating
pair
One model transmits at 1310 nm and receives
at 1490 nm, while the mating model transmits
at 1490 nm and receives at 1310 nm.
The reach is up to 40km.
1000BASE-EX DDI AA1419071-E6 1550 nm, up to 120 km (non-CWDM)
1000BASE DDI CWDM AA1419053-E6 1470 nm, up to 40 km
AA1419054-E6 1490 nm, up to 40 km
AA1419055-E6 1510 nm, up to 40 km
AA1419056-E6 1530 nm, up to 40 km
AA1419057-E6 1550 nm, up to 40 km
AA1419058-E6 1570 nm, up to 40 km
AA1419059-E6 1590 nm, up to 40 km
AA1419060-E6 1610 nm, up to 40 km
AA1419061-E6 1470 nm, up to 70 km
Hardware compatibility
12 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Model ROHS product number Description
AA1419062-E6 1490 nm, up to 70 km
AA1419063-E6 1510 nm, up to 70 km
AA1419064-E6 1530 nm, up to 70 km
AA1419065-E6 1550 nm, up to 70 km
AA1419066-E6 1570 nm, up to 70 km
AA1419067-E6 1590 nm, up to 70 km
AA1419068-E6 1610 nm, up to 70 km
Small form factor (SFP+) pluggable plus transceivers
SFP+ transceivers are hot-swappable input and output enhancement components that allow 10
gigabit connections. All Avaya SFP+ transceivers use Lucent connectors (LC) to provide precision
keying and low interface losses.
Note:
The following table lists and describes the Avaya SFP+ devices specific to the 4450GTX-HT-PWR+
model.
Table 5: Supported SFP+ transceivers and cables (VSP 4000 4450GTX-HT-PWR+ only)
Model number Part number Description
10GBASE-LR (-5 °C to +85 °C) AA1403011-E6HT 1310 nm SMF. The range is up to
10 km.
10GBASE-SR (0 °C to +85 °C) AA1403015-E6HT 850 nanometers (nm). The range
is up to the following:
• 26 m using 62.5 micrometer
(μm), 160 megaHertz times km
(MHz-km) MMF
• 33 m using 62.5 μm, 200 MHz-
km MMF
• 66 m using 62.5 μm, 400 MHz-
km MMF
• 82 m using 50 μm, 500 MHz-km
MMF
• 300 m using 50 μm, 2000 MHz-
km MMF
• 400 m using 50 μm, 4700 MHz-
km MMF (OM4)
Note:
The following table lists and describes the Avaya SFP+ devices supported on the 4450GTX-HT-
PWR+ model, but their use causes a warning due to their limited temperature rating.
Supported optical devices
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 13
Comments? [email protected]

Table 6: Supported SFP+ transceivers and cables
Model number Part number Description
10GBASE-CX AA1403018-E6 to AA1403021-E6 4-pair twinaxial copper cable to
connect 10 Gb ports. The
maximum range is 15 m.
10GBASE-ER/EW AA1403013-E6 1550 nm SMF. The range is up to
40 km.
10GBASE-ER CWDM DDI AA1403153-E6 1471 nm SMF. The range is up to
40 km.
AA1403154-E6 1491 nm SMF. The range is up to
40 km.
AA1403155-E6 1511 nm SMF. The range is up to
40 km.
AA1403156-E6 1531 nm SMF. The range is up to
40 km.
AA1403157-E6 1551 nm SMF. The range is up to
40 km.
AA1403158-E6 1571 nm SMF. The range is up to
40 km.
AA1403159-E6 1591 nm SMF. The range is up to
40 km.
AA1403160-E6 1611 nm SMF. The range is up to
40 km.
10GBASE-LR/LW AA1403011-E6 1310 nm SMF. The range is up to
10 km.
10GBASE-LRM AA1403017-E6 1310 nm. Up to 220 m reach over
Fiber Distributed Data Interface
(FDDI)-grade 62.5 μm multimode
fiber. Suited for campus LANs.
10GBASE-SR/SW AA1403015-E6 850 nanometers (nm). The range
is up to the following:
• 26 m using 62.5 micrometer
(μm), 160 megaHertz times km
(MHz-km) MMF
• 33 m using 62.5 μm, 200 MHz-
km MMF
• 66 m using 62.5 μm, 400 MHz-
km MMF
• 82 m using 50 μm, 500 MHz-km
MMF
• 300 m using 50 μm, 2000 MHz-
km MMF
Hardware compatibility
14 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Model number Part number Description
• 400 m using 50 μm, 4700 MHz-
km MMF (OM4)
10GBASE-ZR/ZW AA1403016-E6 1550 nm SMF. The range is up to
70 km.
10GBASE-ZR CWDM DDI AA1403161-E6 1471 nm SMF. The range is up to
70 km.
AA1403162-E6 1491 nm SMF. The range is up to
70 km.
AA1403163-E6 1511 nm SMF. The range is up to
70 km.
AA1403164-E6 1531 nm SMF. The range is up to
70 km.
AA1403165-E6 1551 nm SMF. The range is up to
70 km.
AA1403166-E6 1571 nm SMF. The range is up to
70 km.
AA1403167-E6 1591 nm SMF. The range is up to
70 km.
AA1403168-E6 1611 nm SMF. The range is up to
70 km.
Optical power considerations
When you connect the device to collocated equipment, ensure that enough optical attenuation exists
to avoid overloading the receivers of each device. You must consider the minimum attenuation
requirement based on the specifications of third-party equipment. For more information about
minimum insertion losses for Avaya optical products, see Installing Transceivers and Optical
components on the Avaya Virtual Services Platform 4000 Series, NN46251-301.
Supported optical devices
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 15
Comments? [email protected]

Chapter 4: Installing the Avaya VSP 4000
4450GTX-HT-PWR+
Installation fundamentals
The following section describes the installation fundamentals for the VSP 4450GTX-HT-PWR+
model.
VSP 4450GTX-HT-PWR+ model
The VSP 4450GTX-HT-PWR+ model consists of:
1. 48 10/100/1000 Base TX RJ-45 ports with PoE+
2. two combo SFP ports supporting fiber or copper connection
3. two 1/10G SFP + ports for fiber or copper connection
Figure 1: VSP 4450GTX-HT-PWR+
1. VSP 4000 USB port
Note:
The VSP 4450GTX-HT-PWR+ model does not require a USB device in the USB port for normal
operation. The USB port can be used for file transfer of configs and logs using a USB drive.
2. Switch LEDs
3. 10/100/1000 PoE+ ports (LEDs above ports)
4. Combo port SFP slots. Supports Avaya 1G SFPs and 100Base low speed SFPs.
5. SFP+ slots. Supports Avaya’s 1G SFPs and 10G SFP+s.
6. Console Port
Electrostatic discharge
This section provides information and procedures to prevent electrostatic discharge during
installation.
16 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Preventing electrostatic discharge damage
Electrostatic discharge (ESD) is a discharge of stored static electricity that can damage equipment
and impair electrical circuitry. Electrostatic voltages can result from friction including, pulling cabling
through conduits, walking across carpeted areas, and building static charge in clothing. When you
improperly handle electronic components, ESD damage occurs and can result in complete or
intermittent failures. While networking equipment is commonly designed and tested to withstand
common mode ESD events, voltage can sometimes discharge to some connector pins, which can
potentially damage the networking equipment.
Caution:
To protect the Avaya VSP 4000 against ESD damage, take the following measures before you
connect data cables to the device:
• Always use antistatic wrist straps. Make sure you adjust the strap to provide good skin
contact.
• Ensure that you properly ground work surfaces and equipment racks for protection against
electrostatic discharge. You must connect the common point to the building ground wire. In
a properly wired building, the nearest reliable ground is typically at the electrical outlet.
• Avoid contact between equipment and clothing. The wrist or ankle strap protects only the
equipment from ESD voltages on the body; ESD voltages on clothing can still cause
damage.
• Avoid touching any connector pins.
• Do not remove the wrist or ankle strap until the installation is complete.
Preventing electrostatic damage in new cable installations
With new cable installations, Avaya recommends that you use an ESD discharge cable to reduce
the potential for damage from static, that can build up in cables. The following figure illustrates an
ESD cable.
Electrostatic discharge
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 17
Comments? [email protected]

Figure 2: Job aid
To install the ESD discharge cable, perform this procedure.
1. Connect the ground lug on the ESD discharge cable to a safe and suitable earth ground.
2. Connect all RJ-45 cable connectors to the female RJ-45 connector of the ESD discharge
cable for at least 5 seconds, and then connect each RJ-45 cable connector to the switch.
3. Leave cables connected to the networking equipment. After you connect cables to
networking equipment, the cables do not build up charge.
Environmental requirements
The following table provides the environmental requirements for the individual switches in this
series. Ensure that the area where you install the switch and where it operates meets these
requirements.
Table 7: Avaya Virtual Services Platform 4000 environmental requirements
Environmental requirement Avaya Virtual Services Platform 4000 models
Operating Temperature 0°C to 70°C (32°F to 104°F), continuous operation
Storage Temperature –40°C to 85°C (-13°F to 158°F)
Operating and Storage Humidity 0 to 95 percent noncondensing
Maximum Operating Altitude 3,048m (10 000 feet) above sea level
Altitude 0 to 3,048m (0 to 10,000ft) above sea level
Storage Altitude 0 to 12,192m (0 to 40,000ft) above sea level
Acoustic Noise Less than or equal to 45 db at 35°C and less than or equal to 57 db at
50°C. The temperature is allowed to have ±3.5°C deviation around the
threshold of 35C, (measurement methods based on ISO 7779).
Installing the Avaya VSP 4000 4450GTX-HT-PWR+
18 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]

Environmental requirement Avaya Virtual Services Platform 4000 models
Miscellaneous Operating
Considerations
• No heat sources such as hot air vents or direct sunlight near the
switch.
• No sources of severe electromagnetic interference near the switch.
• No excessive dust in the environment.
• An adequate power source is within 6 feet (1.83 meters) of the switch.
One 15-amp circuit is required for each power supply.
• At least 2 inches (5.08 centimeters) of clearance on each side of the
switch unit for ventilation.
• Adequate clearance at the front and rear of the switch for access to
cables.
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of the
device. No user-serviceable components are inside. For a translation of this statement, see
Translations of safety messages on page 36.
Package contents
The following describes the components that are provided with each switch. If any components are
missing, contact the switch vendor.
1. Avaya Virtual Services Platform 4000 4450GTX-HT-PWR+ switch with one power supply
installed
2. Rack-mounting hardware that includes:
• Rack-mount brackets
• Screws to attach brackets to the switch
• Screws to attach the switch to the equipment rack
3. Rubber footpads
4. AC power cord with an IEC 60320 C16 connector. (Note: A power cord is not included for
the A variant of the switch.)
5. Documentation that includes the following:
a. Locating the latest software and product Release Notes (NN46251–106)
b. The Regulatory guide (NN46251–105)
c. The Quick Install guide (NN46251–306)
d. The China RoHS paper
Package contents
August 2014 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ 19
Comments? [email protected]

Installing the Avaya Virtual Services Platform 4000 on a
table or shelf
You can install a single Avaya VSP 4000 switch on any flat surface. The surface must support the
combined weight of the switch and attached cables (from 15 and 20 pounds [7 to 9 kilograms]).
To install an Avaya VSP 4000 on a table or shelf, perform this procedure.
1. Attach the included rubber footpads on the bottom of the switch at the locations indicated.
2. Set the switch on a table or shelf as illustrated below. Allow at least 2 inches (5.1
centimeters) on each side for proper ventilation and at least 5 inches (12.7 centimeters) at
the back for power cord clearance.
Installing the Avaya Virtual Services Platform 4000 in an
equipment rack
To install an Avaya VSP 4000 switch in an equipment rack, perform this procedure.
Installing the Avaya VSP 4000 4450GTX-HT-PWR+
20 Installing the Avaya Virtual Services Platform 4000 VSP4450GTX-HT-PWR+ August 2014
Comments? [email protected]