Aventura VID-1632HDD User manual

1
VID-1632HDD
Distribution Amplifier
High Density Distribution Amplifier for Redundant Recording
Reference Manual
Please read these instructions before installations and keep for later reference.
NOTES:
1. Do not use in extreme heat or cold conditions
2. Do not expose to rain or moisture
3. Do not expose to flammable, explosive, or corrosive gas.
4. Avoid exposure to dust or other particles that may get inside the equipment.
5. Use of extension cords may significantly increase risk of fire, electric shock, and damage to the
equipment.
6. To avoid risk of electric shock and damage to equipment do not open the device.
7. Professional installation is required.

2
Brief Introduction
The VID-1632HDD consists of three (3) groups of eight (8) video inputs and outputs. Each group consists
of eight (8) BNC inputs, eight (8) BNC Outputs, and four (4) separate DSUB 15-Pin connectors. This
allows each group of eight (8) inputs to be distributed to one (1) analog source and two (2) DVRs for
redundant recording. The amplifier is powered by two (2) USB ports and one 5VDC direct line. All USB
power sources are connected creating a redundant power input structure.
Specifications
Video Input Ports
32 Channels BNC, 1Vp-p, 75 ohms
Video Output Ports
32 Channels BNC, 1Vp-p, 75 ohms
Primary Connection
DSUB 15-Pin Connection to Primary & Redundant DVRs
Impedance
75 ohms
Input Voltage
5 V USB (Power only)
Power Input
3 X USB Ports (to be powered from DVR)
Dimension
1.9" x 5.25" x 8.5"
Material
Steel, Powder Coat
Operating
Temperatures
32 - 120° F, 85% non-condensing humidity
Weight
5 lb
Back Panel
Front Panel
32 Channels BNC In
32 Channels BNC Out
DSUB 15-Pin Connection to Primary and Redundant DVRs
Automatic Gain Control

3
DC 5V Input
Side Panel

4
4x Primary
Connectors
4x Secondary
Connectors
5VCD USB
Power Input
Power LED
Back Panel

5
32x BNC Video Inputs
32x BNC Looping Video Outputs
Front Panel

6
BNC Connection
to camera
Front Panel Connection

7
BNC Connection
To Matrix
Front Panel Connection

8
D15 Ribbon Connection
to Encoder
Encoder Card
Back Panel Connection

9
Technical Support
For difficulties using this unit please contact Aventura technical support at 631-300-4000 or toll-free at
1-877-707-9600. Online support is available at www.AventuraCCTV.com or email
[e-mail]
When contacting technical support be certain to have full details about your Aventura products
available, including model and invoice numbers.
Service
Any service required by this unit should be performed by Aventura or authorized service personnel.
Unauthorized service may invalidate warranties or service agreements. Some service may require
equipment to be returned to Aventura’s offices for evaluation and repair. Be certain to follow proper
packing and shipping instructions for all equipment to prevent damage during transport.