Avico ACH-HDT6000D User manual

FULL HD MEGA PIXEL CAMERA
FULL HD
MEGA PIXEL
STANDARD CAMERA
USER’S MANUAL
HD 001-05
■ 1/3" Panasonic CMOS sensor
■ Full HD Resolution
■ DAY & NIGHT
■ WDR (Wide Dynamic Range)
■ DNR (Digital Noise Reduction, 2D+3D)
■ Privacy mask Function
■ On Screen Display
■ Deblur Function
■ HD-SDI/CVBS Output
■ Multi Protocol(Pelco-D, Pelco-P)

Precaution
Components
Do not install the camera in extreme temperature conditions
To avoid malfunctions, never use the camera close to a gas
or oil leak
Do not Keep the camera face tostrong light directly
Do not disassemble the camera even if troubles happened
Do not drop the camera or subject them to physical shocks.
Do not install the camera under unstable lighting conditions
Do not install or use the camera in an environment where the
humidity is high
Do not expose the camera to rain or spill beverage on it.
Full HD Mega Pixel Camera
L-Wrench
Manual
FULL HD MEGA PIXEL CAMERA
FULL HD
MEGA PIXEl
STANDARD CAMERA
USER’S MANUAL
■ 1/3"Panasonic CMOS sensor
■ FullHD Resolution
■ DAY& NIGHT
■ WDR(Wid e Dynamic Range)
■ DNR(Digital Noise Reduction, 2D+3D)
■ Privacymask Function
■ OnScreen Display
■ Intelligentmotion detection
■ HD-SDI/CVBS Output
■ MultiProtocol(Pelco-D, Pelco-P)
HD001

1. Features
■1/3" Panasonic CMOS sensor
2,227,080pixels(Total) / 2,122,848pixels(Active)
■Full HD Resolution
1920x1080p / 30fps, 1280x720p / 60fps
■ DAY & NIGHT (Output the Filter changing signal)
This camera has the DayNight function which outputs the lter changing signal
with detecting the illumination condition. DayNight operation feature an ‘auto’
mode which switches between day and night mode automatically based upon
the level of illumination on the scene. EXT mode changes between day and night
operation upon triggering from an external source(Optional).
And also, the COLOR mode operates in daytime conditions to provide optimum
colors, and B/W mode operates in night-time conditions to enhance the denition
of the image.
■ WDR (Wide Dynamic Range)
WDR, more eectively than previous models,
by applying an optimum fusion ratio when combining the high speed
shutter used in bright areas and the low speed shutter used in dark areas.
■ DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear
image. This camera DNR function utilizes both an adaptive 2D lter
reducing noise in the brightness of the image and an adaptive 3D lter
reducing noise caused by movement.
■ Privacy mask Function
The privacy zone function makes it possible to make specic areas of the
scene from view.
■ On Screen Display
This camera supports the OSD function. And so, the camera can be controlled
by selecting text displayed on the monitor screen.
■ DEBLUR
This function may reduce the blurring effects for the moving object ,
maintaining the shutter speed in the AGC works.
; normal type of AE is to control the AGC after hold back shutter, but In
deblur mode AE is control the AGC with the specific shutter control value.
It may arise some noise caused of AGC works.
Specifically in indoor situation it may occur a color rolling effect of normal CMOS
character by high shutter.
And also, If Sens-up & shutter &Deblur function are operated simultaneously,
the priority function as follows; Sens-up, shutter, deblur mode.
■ Output
Digital output : HD-SDI
Analog output : NTSC, PAL Composite (without WDR)
■ Protocol
This camera supports the multi-protocol (Pelco-D, Pelco-P)

2. Names and Functions of Parts
1) Front
①Lens protection cap
Please cover while it is out of use.
②CS-Mount lens adaptor
Please attach the CS-Mount lens here.
③Back Focus clamp screw
Please loosen the clamp screw with a screwdriver before
adjusting the Back focal length.
Mounting bracket screw hole
Please use the screw hole when
fixing the camera onto the
mounting bracket. Please use
the clamp screw as specified in
the picture.
The mounting bracket can be separated and attached
to the top of the camera. In this instance please do not
tighten the screw to a depth of more than 5mm,
otherwise serious damage can influence in the inner parts
of the camera.
4
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm (ISO standard),
or 0.197" (ASA standard)
L
2) Back
①Auto iris lens connector
This is the connection terminal for auto iris lens.
②Video composite Out
①
①
②
②
③
③
④
④
⑤
⑥
⑦

3. Connection(RS485-Option)
Power lamp
③
Light up when the correct power is supplied to the camera.
④Setting button(OSD Joystick)
HD-SDI : Connect this connecter to a device such as a DVR
or monitor with a HD Video function.
ENTER button : Use for menu display. This button can
be used to confirm settings after changing the value of the
selected function or current conditions.
UP & DOWN buttons : Use for selecting items by moving
the cursor up or down on the menu screen.
LEFT(L) & RIGHT(R) buttons : Use when changing item values
by moving the cursor to the left or right on the menu screen.
⑤
Power input terminal
External Device Connectors
The camera can be controlled by using external controller
like a remote controller.
Connect to the power appropriate to each power
requirement, (24V AC)
⑥
⑦
*The camera can be controlled by using external controllers
like a remote controller.
* Connect the RS485 cable(+, -) to the connection port of the
485 control that is connected to the DVR or System Controller.
Monitor
DVR
RS485 + RS485 -

4. How to Set up the Function
MENU
■ Main Menu
1. EXPOSURE
Adjust camera exposure.
2. WDR/DNR
The function is used to set the Back Light Compensation(BLC) and High
Light Compensation(HLC) and Digital Noise Reduction(DNR).
3. WHITE BAL
This function is used to set the White Balance operation which adjusts the
color scheme.
4. DAY/NIGHT
The function is used to set the Day/Night function which switches day/
Night mode automatically based on the level of illumination.
5. MOTION
The function is used to configure the Motion Detection operation and
Alarm function which sense the movement of the scene.
6. PRIVACY
The function is used to configure up to 32 privacy masks, where the scene
is prohibited or undesired to be viewed.
7. OPTION
Set up Reverse, Sharpness, D-ZOOM, etc.
8. CAMERA SET
Configure camera related functions and data such as Title, Communication, etc.
9. LANGUAGE
The function is used to select preferred one from the supported languages.
10. EXIT
SAVE: The function is used to save the various settings of the internal OSD
menu in the EEPROM together.
RESET: The function initializes all the internal OSD menu settings.
EXPOSURE
WDR/DNR
WHITE BAL
DAY/NIGHT AUTO
MOTION OFF
PRIVACY OFF
OPTION
CAMERA SET
LANGUAGE ENGLISH
EXIT

■1/3" Panasonic CMOS sensor
2,227,080pixels(Total) / 2,122,848pixels(Active)
■Full HD Resolution
1920x1080p / 30fps, 1280x720p / 60fps
■ DAY & NIGHT (Output the Filter changing signal)
This camera has the DayNight function which outputs the lter changing signal
with detecting the illumination condition. DayNight operation feature an ‘auto’
mode which switches between day and night mode automatically based upon
the level of illumination on the scene. EXT mode changes between day and night
operation upon triggering from an external source(Optional).
And also, the COLOR mode operates in daytime conditions to provide optimum
colors, and B/W mode operates in night-time conditions to enhance the denition
of the image.
■ WDR (Wide Dynamic Range)
WDR, more eectively than previous models,
by applying an optimum fusion ratio when combining the high speed
shutter used in bright areas and the low speed shutter used in dark areas.
■ DNR (Digital Noise Reduction, 2D+3D)
The DNR technology eliminates noise thus generating a distinct and clear
image. This camera DNR function utilizes both an adaptive 2D lter
reducing noise in the brightness of the image and an adaptive 3D lter
reducing noise caused by movement.
■ Privacy mask Function
The privacy zone function makes it possible to make specic areas of the
scene from view.
■ On Screen Display
This camera supports the OSD function. And so, the camera can be controlled
by selecting text displayed on the monitor screen.
■ DEBLUR
This function may reduce the blurring effects for the moving object ,
maintaining the shutter speed in the AGC works.
; normal type of AE is to control the AGC after hold back shutter, but In
deblur mode AE is control the AGC with the specific shutter control value.
It may arise some noise caused of AGC works.
Specifically in indoor situation it may occur a color rolling effect of normal CMOS
character by high shutter.
And also, If Sens-up & shutter &Deblur function are operated simultaneously,
the priority function as follows; Sens-up, shutter, deblur mode.
■ Output
Digital output : HD-SDI
Analog output : NTSC, PAL Composite (without WDR)
■ Protocol
This camera supports the multi-protocol (Pelco-D, Pelco-P)
■ EXPOSURE
This function can adjust the intensity of radiation incoming to the camera.
Use the "
▲ " " ▼ " " ◀ " " ▶ " " ⓔ " switch to select a menu item.
LENS DC
MANUAL DC (Auto IRIS Control)
MANUAL(Electronic Shutter Control)
BRIGHTNESS
MODE
SHUTTER
FREQ
AGC
SENS-UP
SHADING
0~20
INDOOR
OUTDOOR
DEBLUR
1/30(PAL:1/25)
1/60(PAL:1/50)
1/120(PAL:1/100)
1/240,~1/60K
50HZ
60HZ
0~10
OFF,x2,~x8
ON, OFF
Sets the screen brightness
IRIS
IRIS+SHUTTER
Sets the screen shutter
50Hz Input Frequency
60Hz Input Frequency
Sets the screen AGC
Sets the screen sens-up
FUNCTION OPTION DESCRIPTION
Sets the Lens Shading
Sets the Indoor/Outdoor
EXPOSURE
LENS DC
BRIGHTNESS 10
MODE INDOOR
SHUTTER AUTO
FREQ 60HZ
AGC 10
SENS-UP X2
SHADING OFF
RETURN

WDR/DNR WDR/DNR
■ WDR/DNR
*Not CVBS output when WDR mode.
MODE
OFF,WDR,D-WDR,BLC
Select the Mode
WDR_WGT 0~4 Can be adjusted from Level 1 to 4.
BLC OSD
ON, OFF
BLC Area shows up on the screen
BLC POS-X
0~20 Set the position of BLC area.
BLC POS-Y
0~20
Set the position of BLC area.
BLC SIZ-X
0~20 Set the size of BLC area.
BLC SIZ-Y
0~20
Set the size of BLC area.
DNR
OFF,LOW,MIDDLE,HIGH Set up 3D-DNR LEVEL
HLC
ON, OFF
Set up HLC
RETURN
FUNCTION OPTION DESCRIPTION
1. MODE
MODE OFF NOT USED
WDR WDR(Wide Dynamic Range) ON.
D-WDR
Digital WDR(Digital Wide Dynamic Range) ON.
BLC BLC(Back Light Compensation)
FUNCTION OPTION DESCRIPTION
MODE D-WDR
WDR_WGT -
BLC OSD -
BLC POS-X -
BLC POS-Y -
BLC SIZ-X -
BLC SIZ-Y -
DNR MIDDLE
HLC OFF
RETURN
MODE BLC
WDR_WGT -
BLC OSD OFF
BLC POS-X 7
BLC POS-Y 5
BLC SIZ-X 5
BLC SIZ-Y 7
DNR MIDDLE
HLC OFF
RETURN
LEVEL 0
COLOR BLK
RETURN
HLC

WDR/DNR
2. BLC OSD
WHITE BAL AWB
■ WHITE BALANCE
3. DNR
DNR OFF/LOW/
MIDDLE/HIGH
Can be adjusted DNR level
(Digital Noise Reduction)
FUNCTION OPTION DESCRIPTION
4. HLC
HLC OFF
ON
Can be adjusted from Level 1 to 20
Can be adjusted color
FUNCTION OPTION DESCRIPTION
ON, OFF
Can be adjusted BLC area.
0~20
0~20
0~20
0~20
BLC OSD
BLC POS-X
BLC POS-Y
BLC SIZ-X
BLC SIZ-Y
FUNCTION OPTION DESCRIPTION
MODE BLC
WDR_WGT -
BLC OSD ON
BLC POS-X 7
BLC POS-Y 5
BLC SIZ-X 5
BLC SIZ-Y 7
DNR MIDDLE
HLC OFF
RETURN
AWB AUTO
CHROMA 12
RETURN
KELVIN MIDDLE
R-GAIN 10
B-GAIN 10
RETURN

DAY/NIGHT
1. AWB
AUTO
MODE for using only Blue filter (IR Cut O.L.P.F)mode
MODE for using only IR Cut Coating filter (O.L.P.F)mode
AUTO ext
PUSH
MANUAL
AWB
FUNCTION OPTION DESCRIPTION
AUTO
Auto trace white balance
TDN lens Auto trace white balance
Can be changed in AWC mode only
Manual white balance
When the set color temperature doesn’t meet with
user’s environment, press the menu button long to
adjust the color temperature to desired setting.
AUTO ext
PUSH
MANUAL
AWB
FUNCTION OPTION DESCRIPTION
2. CHROMA
0~20
Can be adjusted chroma
CHROMA
FUNCTION OPTION DESCRIPTION
■ DAY/NIGHT
THRESHOLD
MARGIN
DELAY
SMART IR
Sets the threshold for identifying the Night status from the Day status.
Sets the margin for identifying the night status from Day status.
Sets the Night/Day identification tranfer time.
AUTO
Only Day
DAY
SMART IR
Only Night
B&W
DELAY
SMART IR
External Input 1
EXT1
DELAY
SMART IR
External Input2
EXT2
FUNCTION OPTION DESCRIPTION
THRESHOLD 8
MARGIN 12
DELAY LOW
RETURN

MOTION
RESOLUTION 1
SENSITIVITY 10
WINDOW USE ON
WINDOW TONE 3
X-POS 19
Y-POS 8
X-SIZ 20
Y-SIZ 18
RETURN
MOTION
■ MOTION
■ PRIVACY
0~4
0~20
ON, OFF
0~6
0~60
0~40
0~60
0~40
The size of the detection area.
Sets the motion detection sensitivity.
Select area using
Set the transparency of a window
X Position
Y Position
X Size
Y Size
RESOLUTION
SENSITIVITY
WINDOW USE
WINDOW TONE
X-POS
Y-POS
X-SIZ
Y-SIZ
FUNCTION OPTION DESCRIPTION
0~31
ON, OFF
0~60
0~40
0~40
0~40
CYN, GRN, MAG, RED,
BLU, BLK, WHT, YEL
0~40
Select 32 area using◀▶ button
Show up PRIVACY AREA function on the screen
X Position
Y Position
X Size
Y Size
Can be selected COLOR mode
Set the transparency of a color
ZONE NO
ZONE OP
X-POS
Y-POS
X-SIZ
Y-SIZ
COLOR
TRANS
FUNCTION OPTION DESCRIPTION
RESOLUTION 1
SENSITIVITY 10
WINDOW USE OFF
WINDOW TONE 3
X-POS 19
Y-POS 8
X-SIZ 20
Y-SIZ 18
RETURN
PRIVACY
ZONE NO 0
ZONE OP ON
X-POS 13
Y-POS 2
X-SIZ 4
Y-SIZ 4
COLOR BLK
TRANS 4
RETURN

This function can set up Title, Version,
Communication, etc.
Use the <>><>>switch to select a
menu item.
OPTION
■ OPTION
■ CAMERA SET
CAMERA SET
DE-FOG
OFF,AUTO, MANUAL
Anti Fog Function
D-OUT SCALE
COMP, FULL
Digital output data scale(compression, full)
D-OUT FORMAT
720P, 1080P
Digital output format
D-OUT-FPS
50/60(720P), 25/30(1080P) Digital output Frame per second
COLORBAR
ON, OFF
Test colorbar
CVBS
NTSC, PAL
CVBS output type
SHARPNESS
0~10
0~96
Select the resolution of the camera
MIRROR
ON, OFF
Set up the screen mirror
FLIP
ON, OFF
Set up the screen flip
Enlarge the screen with DIGITAL ZOOM
DZOOM
FUNCTION OPTION DESCRIPTION
TITLE "
ⓔ "Sets Camera TITLE
TITLE DISPLAY
ON, OFF
Camera TITLE display ON/OFF
VERSION
-
Camera Version display
GAMMA
0~20 0(0.45) ~ 20(0.75)
COMMUNICATION
2400,4800,~115200
Select transmission speed
FUNCTION OPTION DESCRIPTION
DE-FOG OFF
D-OUT SCALE FULL
D-OUT FORMAT 720P
D-OUT FPS 60
COLORBAR OFF
CVBS NTSC
SHARPNESS 5
MIRROR OFF
FLIP OFF
DZOOM 8
RETURN
TITLE
TITLE DISPLAY OFF
VERSION HCM-4701-0A
GAMMA
COMMUNICATION
RETURN

COMMUNICATION
1. TITLE
The camera TITLE cursor moves
2. COMMUNICATION
■ LANGUAGE
■ EXIT
TITLE
-------------
SELECT-UP / DOWN
MOVE-LEFT / RIGHT
ENTER-RETURN
CAMERA ID
BAUDRATE
PROTOCOL
SAVE
ID DISPLAY
0~254
2400, 4800~115200
PELCO-D, PELCO-P
OK, NG
ON, OFF
Sets camera ID
Select transmission speed
Select transmission protocol
Save protocol. Not save protocol
Camera ID display ON/OFF
FUNCTION OPTION DESCRIPTION
LANGUAGE ENGLISH, 中文,日本語
ITALIANO,DEUTSCH,
ESPANOL, RUSSIA
Selects the language in which to
display the internal OSD menu
FUNCTION OPTION DESCRIPTION
EXIT SAVE
RESET
All the settings of the internal OSD menu are saved
All the internal OSD menu settings are reset
FUNCTION OPTION DESCRIPTION
CAMERA ID 0
BAUDRATE 9600
PROTOCOL Pelco-D
SAVE
ID DISPLAY OFF
RETURN

5. Specification
Image Sensor
Total Pixels
Active pixels
Scanning system
Resolution
Min. illumination
Video Output
S/N Ratio
Function
High Speed Shutter
Day&Night
ATW
MODE
OSD
WDR
D-WDR
BLC
Motion Detection
DNR
White Balance
Privacy Mask
Camera ID
D-Zoom
AGC
1/3" Panasonic CMOS
2010(H) x 1108(V) = 2,227,080 (pixel)
1944(H) x 1092(V) = 2,122,848 (pixel)
Progressive
Digital ; 1920x1080p(1080p/30fps) , 1280x720p(720p/60fps)
Analog : 700TVL
Color : 1.0 lux , BW : 0.5lux
Color DSS : 0.002 lux , BW DSS : 0.001 lux
HD-SDI, BT.1120
Analog : NTSC, PAL(without WDR)
more than 50dB (AGC off)
1/30(1/25) ~ 1/60Ksec
Auto/Day/B&W/EXT1/EXT2
1800 ~ 10500K
Indoor / Outdoor / Deblur
ENGLISH/FRANCAIS/ITALIAN/DEUTSCH/ESPANOL/日本語/
中文/RUSSIAN/
한국어
2 ~ 4
Off/On
Off/ON (Size, Position)
Off/ON
HLC Level Setting(0~20), Color
3DNR, OFF/LOW/MIDDLE/HIGH
AUTO / AUTOext / PUSH / MANUAL
32 Areas (On/Off, Color, Position)
Off/On (Letters A to Z, Numerals 0 to 9, Symbols)
0~96 Steps
Level Setting(0~10)

Design and specifications are subject to change without notice.
Sens-Up
Etc. Function
Video Output
Sharpness, Reverse(H,V)
In/Output
HD-SDI(SMA CONNECTOR)
Lens
Cable
5C-2V 120m(Max)
Dimension 61(W) x 55(H) x 106(L)mm
Operating Temperature
Storage Temperature
x2 ~ x4
Defog
Off / Auto / Manual
0~10, Off / On
ColorBar
Off / On
Alarm Output
ANALOGUE
NTSC, PAL CVBS(without WDR)
Video Output
C / CS Mount
Power Source
Power Consumption
DC12V±10% , AC24V±10%
DC12V240mA / AC 24V 100mA
-10 ~ +50 (Humidity : 0%RH ~ 80%RH)
-20 ~ +60 (Humidity : 0%RH ~ 90%RH)
 ℃  ℃
 ℃  ℃

PRODUCT WARRANTY CARD
1) ITEM # :
2) S/N # :
3) INSTALLATION CONDITION
- Indoor  / Outdoor 
- Power supply SPECIFICATION :
DC12V  / AC24V 
CURRENT __________ mA
4) TROUBLESHOOTING
- No picture 
- Bad image 
- No power 
- Water damage 
- LED ON  / OFF 
- ETC.  :
* Please keep this warranty card with the manual.
* Please fill out this warranty card and send us this warranty card
with the faulty units together.
Following cases can be charged even within the warrany period.
a. When defects are caused by user’s carelessness.
b. When improper or unauthorized repairs are done or when the inside is
modified or damaged.
c. Defects caused by natural disaster or power problem.
d. When the warranty card is not filled out or corrected unconfirmed.