IMPORTANT SAFETY
INFORMATION
This is a SAFETY ALERT symbol.
It is used to alert you to
potential personal
injury hazards. Obey all
safety messages that follow
this symbol to avoid possible injury or death.
DANGER indicates a
hazardous situation which, if not avoided,
will result in death or injury.
WARNING indicates a
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION indicates a
hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTICE indicates
important information which, if not followed,
may cause damage to equipment.
SAVE THIS MANUAL
Keep this manual for the safety warnings
and precautions. The manual offers impor-
tant information on how to assemble, use
and maintain this product.
Write the product’s model number and
purchase date on the cover page of this
manual.
Keep this manual (and your purchase re-
ceipt) in a safe place.
UNPACKING
The shipment should be thoroughly inspected as
soon as it is received. The signed “bill of lad-
ing” is acknowledgement by the carrier of receipt
in good condition or shipment covered by our
invoice. For your own protection, if any of the
goods called for on the bill of lading are shorted
or damaged, do not accept them until the carrier
makes a notation on the freight bill of the shorted
or damaged goods.
Notify AVITEC immediately if any hid- den loss
or damage is discovered after receipt.
DANGER
WARNING
CAUTION
NOTICE
INSTRUC -
TION
WARNING concerning Risk of Eye
Injury. Wear ANSI approved eye
protection.
WARNING concerning Risk of
Hearing Loss. Wear hearing pro-
tection.
IMPORTANT SAFETY
INSTRUCTIONS
1. Read and understand all
safety warnings and in-
structions. Failure to follow the warnings
and instructions may result in serious injury
or death. Save all warnings and instructions
for future reference.
2. Personal and Work Area Safety
A. Always wear ANSI approved
safety goggles.
B. Always wear hearing protec-
tection when working in
noisy environments. Prolonged exposure
to high intensity noise can cause hearing
loss.
C. Use safety equipment. Safe-
ty shoes, hard hat and work
gloves must be used for applicable condi-
tions.
Model 110109 Page 2
D. Dress appropriately. Never wear loose
Contain long hair, and keep hair, clothing
and gloves away from moving parts.
E. Use common sense when working.
Stay alert and concentrate when assembling
and using the Quick Adjustable Dual Ball
-
ence of alcohol, drugs or medications.
Personal and Work Area Safety (continued)
F. While assembling and using the Quick
Adjustable Dual Ball Mount keep work area
clean and well lighted. Keep spectators and
children out of the work area.
3. Use of this Quick Adjustable Dual Ball
Mount
A. Do not exceed the
Quick Adjustable Dual Ball Mount’s maxi-
chart on page 5).
B. Always make sure that the trailer is
chocked properly when attaching the Quick
Adjustable Dual Ball Mount. Take safety
precautions to prevent unsafe movement of
the trailer as it is being attached to the tow-
ing vehicle.
C. Make sure that the trailer tongue is
securely connected to the ball mount.
The vehicle’s hitch coupler must be prop-
erly secured to the Receiver Tube of the
Quick Adjustable Dual Ball Mount. After
set-up and attachment is complete, pull
hitch coupler; there should be no play
between the ball and the hitch coupler.
If the hitch coupler
is not adjusted properly the ball mount
could loosen while the vehicle/trailer are
on the road, resulting in serious property
damage, personal injury or death.
Safety chains between the towing vehicle
and the trailer are always required.
D. Assemble this Ball Mount so that the
trailer will be level when hitched to the tow-
ing vehicle. Note: See page 4, paragraph
#1 for information on how to determine
proper height of ball mount to insure a
level trailer.
E. Always keep arms, feet and legs away
from under the trailer when setting up the
Quick Adjustable Dual Ball Mount, and when
hitching, unhitching or moving the trailer.
Keep spectators away when setting up and
using this product.
F. Be aware of the danger of “dynamic
loading”. This situation arises when a load is
dropped onto the Quick Adjustable Dual Ball
Mount/trailer tongue, resulting in a short term
excessive load. Dynamic loading can result
in damage and failure of the Quick Adjustable
Dual Ball Mount and/or trailer tongue, and
personal injury to people nearby.
G. Before each use, check the Quick
Adjustable Dual Ball Mount, trailer tongue
and receiver hitch to make sure all hard-
ware is tightly secured. Check for damaged
or worn parts; never use the Quick Adjustable
Dual Ball Mount if it is damaged.
Keep in mind that the warnings previ-
ously discussed cannot cover all possible
events and circumstances. It is important
that the person setting up and using this
product use common sense at all times.
AVITEC is not responsible for
the
attachment or the installation of this
product. The attachment of this product is
critical and beyond the control of AVITEC It
neither guarantees, nor will it be liable for
any damage resulting from the Quick
Adjustable Dual Ball Mount’s at-tachment
or improper use.
Limited Warranty. AVITEC warrants to the
original retail purchaser that the product is
free of defects in material and workmanship at
the time of shipment. This Quick Adjust-able
Dual Ball Mount is warranteed for 90 days
from the date of purchase. This war-ranty is
expressly in lieu of all other warran-ties,
express or implied. Proof of purchase
is required for warranty transactions; a copy of
the original invoice or sales receipt is re-
quired. Model 110109 Page 3
WARNING
WARNING
