CM-series Stage Wedge Monitor User Manual
Operation
When all signal connections are made, turn down the MASTER volume and connect to mains using the
supplied IEC lead to the mains inlet (16). Switch on the power and a green POWER LED (5) will light.
Turn up the MASTER control gradually, checking input signal(s) and gradually adjusting the VOLUME A and
VOLUME B controls until the required volume is reached.
Corresponding to the output signal are a SIG (signal) and CLIP LED. The green SIG LED should be lit when
sound is being produced and the CLIP LED may light very briefly on the loudest transients (beats) of the
signal. If the red CLIP LED lights anything more than very briefly on each peak of the sound, the volume
needs to be reduced to avoid overload and distortion of the output.
For wireless connection from a smart phone, the input section has a Bluetooth on/off and pairing button (3).
Press this button to switch on the Bluetooth receiver, which will automatically connect to a previously paired
smart phone and allow playback through channel A of the monitor. A blue LED (5) will light to confirm this.
To pair a smartphone with the CM-series active monitor, press and hold the Bluetooth button (3), which will
cause the blue LED to flash, indicating pairing. Open the Bluetooth menu on the smart phone and search for a
Bluetooth ID corresponding to the model number (e.g. CM10A) of the wedge monitor. Select and accept to
pair to the CM monitor and the blue LED will stay lit constantly to confirm the pairing.
CM-series active monitors have an inbuilt DSP which has 5 optimal settings for different types of input or
audio program material: Normal / DJ / Voice / Live / Flat. Although quite self-explanatory, it is worth
experimenting with each profile to find the ideal EQ and tone response for each application. Simply turn the
DSP rotary selector (4) and the DSP setting indicator LEDs (1) show which setting is active.
Specifications
44mmØ (1.75”) Ti compression driver
Impedance (active / passive)
Normal, DJ, Voice, Live, Flat
Weight (active / passive)
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Hereby, AVSL Group Ltd. declares that the radio equipment type 178.690UK is in compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet address: http://www.avsl.com/assets/exportdoc/1/7/178690UK%20CE.pdf
Errors and omissions excepted. Copyright© 2022.
AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.
