AWA DA641 User manual

DVD 5.1 HOME THEATRE SYSTEM
DA641-COVER.CDR
DA641

Features.......................................................................................2
For Your Attention...........................................................................3
Accessories...................................................................................4
Panel............................................................................................5
Connection.................................................................................6-7
System Setup...........................................................................8-12
Play........................................................................................13-17
Troubleshooting...........................................................................18
Specification...............................................................................19
Contents
-1-
M1389E21B-P1.CDR

Thank you for purchasing our product. Please read this manual
carefully before connection and operation. Please keep this manual
for future reference.
This DVD player is a new generation home player which can produce
high quality video and audio for your continued enjoyment.
Built in Dolby Digital, LPCM, MPEG etc. digital audio decoder
HiFi, 96kHz/24bit audio digital processor
COAXIAL digital audio output
Compatible with DVD/VCD/CD/MP3/JPEG/ PICTURE
CD/MPEG4 etc.
AM/FM stereo tuning system
High quality amplifier
Features
-2-
DA641-P2.CDR

To reduce the risk of electric shock or fire, do not open the
cover. Refer service to qualified service personnel.
This mark indicates this unit belongs to class 1 laser product.
The laser beam may produce radiation harm to the directly
touching human body.
IMPORTANT NOTES
Please read through the manual carefully before connection and
operation.
Do not open the cover or touch any internal components.
Turnoff the power when the unit is not being used. (Unplug the
power cord if the unit is not used for a long time)
Plug,as the disconnected device entirely with power source ,should
keep in easy-to-operation in daily life.
Don't expose this unit to direct sunlight. Keep away from any
heating sources.
Don't expose this unit to rain or moisture.
Place the unit on a horizontal level. Keep the unit ventilated. Don't
block the heat hole. Overheating may cause malfunction.
Clean the cabinet with soft cloth. Detergent or alcohol is not
recommended as it may damage the unit.
This book is only a guide for user’s operation.
The apparatus shall not be exposed to dripping or splashing and
that no object filled with liquids, such as vases, shall be placed on
the apparatus.
For Your Attention
The lightning flash is intended to alert the user to the presence
of dangerous voltage within the product's enclosure, and
touching the internal components may result in a risk of electric
shock to persons.
The exclamatory mark is intended to alert the user to the
presence of important operating instructions.
CLASS 1
LASER PRODUCT
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTIONCAUTION
-3-
M1389E21B-P3.CDR

Accessories
Accessories
AM Antenna Speaker Connect Cable
FM Antenna
Remote Controller Operation
Insert the batteries into the cell box. Points the remote controller at
the remote sensor within 8 meters and with 30-degree of its left or
right side.
Take the batteries out of the controller when it is not being used for
a long time.
A/V Cable
Remote Controller
User Manual
User manual
Remote control
This unit can play the following types of discs
-4-
Symbol Contents
Audio + Video
DVD
Disc types
Audio + Video
Audio
Audio
MP3
Video-CD
VCD
CD-DA
COMPACT
DIGITAL VIDEO
VIDEO CD
JPEG Photo CD
Picture CD
Audio + Video
MPEG-4
V I D E O
M1389E21B-P4.CDR

Panel
-5-
FRONT PANEL
DA641-P5.CDR
REAR PANEL
2. SPEAKER OUTPUT TERMINALS
1. POWER CORD
3. 2CHAUDIO INPUT
4. VIDEO OUTPUT
8. COMPONENT Y,Cb/Pb,Cr/Pr
7. R AUDIO OUTPUT
6. L AUDIO OUTPUT
5. S-VIDEO OUTPUT 9 . COAXIAL
3. OPEN/CLOSE BUTTON
4. PLAY/PAUSE BUTTON
1. POWER
2. DVD DOOR
OFF
ON
S-VIDEO R1 R2
L1 L2
R1 R2 Cr/Pr
VIDEO L1 L2 YCb/Pb
FM 75ohm -ANTENNA-AM LOOP
SWSW CENCEN SRSR SLSL
FRFR FLFL
844444
SPEAKERS OUT
2CH AUDIO IN 2CH AUDIO OUTVIDEO
COMPONENT VIDEO OUT
COAXIAL
DIGITAL AUDIO
11. AM ANTENNA
10 . FM ANTENNA
5. STOP BUTTON
6. VOLUME KNOB

Connection
-6-
audioUse a pair of cable (red for right /white for left) to connect the stereo
audio output terminal of this unit to the other stereo audio input terminal.
Note:
The physical connection should come with audio output setup of this unit.
Please refer toAudio Setup in System Setup.
Coaxial Digital Audio
specifiedUse the coaxial cable to connect the coaxial output terminal of this
unit to the coaxial input terminal of power amplifier.
Stereo Audio
Speaker Output
Use the speaker cable (white+,black-)to connect the speaker output
of this unit to the s .terminals peakers' corresponding terminals
DIGITAL AUDIO
COAXIAL
RL
Analog Audio Output
Connection
-6-
audioUse a pair of cable (red for right /white for left) to connect the stereo
audio output terminal of this unit to the other stereo audio input terminal.
Note:
The physical connection should come with audio output setup of this unit.
Please refer toAudio Setup in System Setup.
Coaxial Digital Audio
specifiedUse the coaxial cable to connect the coaxial output terminal of this
unit to the coaxial input terminal of power amplifier.
Stereo Audio
Speaker Output
Use the speaker cable (white+,black-)to connect the speaker output
of this unit to the s .terminals peakers' corresponding terminals
DIGITAL AUDIO
COAXIAL
RL
Analog Audio Output
Connection
-6-
audioUse a pair of cable (red for right /white for left) to connect the stereo
audio output terminal of this unit to the other stereo audio input terminal.
Note:
The physical connection should come with audio output setup of this unit.
Please refer toAudio Setup in System Setup.
Coaxial Digital Audio
specifiedUse the coaxial cable to connect the coaxial output terminal of this
unit to the coaxial input terminal of power amplifier.
Stereo Audio
Speaker Output
Use the speaker cable (white+,black-)to connect the speaker output
of this unit to the s .terminals peakers' corresponding terminals
DIGITAL AUDIO
COAXIAL
RL
Analog Audio Output
R
Digital Audio Output
Other Audio Input
Digital Audio Input
L
COAXIAL
DA641-P6.CDR
SWSW CENCEN SRSR SLSL
FRFR FLFL
844444
SPEAKERS OUT
FLSPEAKER
SUBWOOFER
FR SPEAKER
SL SPEAKER
SR SPEAKER
CENTER SPEAKER
Speaker Output

Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
YCr/PrCb/Pb
Component Video
Output
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
YCr/PrCb/Pb
Component Video
Output
VIDEO
S-VIDEO
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
YCr/PrCb/Pb
Component Video
Output
VIDEO
S-VIDEO
Connection
S-Video
Note:
The following availablevideo output for this unit .
Usethe AVcable (yellow terminal)to connect composite video output terminal
of this unit to the TV/monitor video input terminal.
Usethe S-videocable to connect the s-video output terminal of this unit to the
TV/monitor S-video input terminal.
Use -core AVcable to connect the component output terminals of this unit to
3
the corresponding TV/monitor input terminals.
Component Video (YUV)
Composite Video
Y
Cb/Pb
Cr/Pr
Component Input
YCr/PrCb/Pb
Component Video
Output
VIDEO
S-VIDEO
VIDEO
S-VIDEO
Video and
S-Video Output
Real connection depends on the TV/monitor input terminal.
Don't use the all connections at the same time, otherwise the picture will be
affected.
Only the physical connection conforms to the video setting can it produce
the normal picture (please refer to the Video Setup in System Setup).
-7-
DA641-P7.CDR

Press [SETUP] key for the screen to show the setup page. In setup mode,
press [SETUP] key again to quit the setup page. Press direction key to the
desired item, andpress [ENTER] to confirm.
(1) Some setup items are concerning the present modes. The items in gray
can't be set up.
(2) The setup is memorizedand will be kept after thepower has been turned off.
MENU OPERATION:
System Setup
TV Display:
4:3 PANSCAN: When the unit connects to the normal TV set, the wide-
screen image showson the full screen, but somepart is cut off.
4:3 LETTERBOX: When the unit connects to the normal TV set, the wide-
screen image shows and black bars appear on the top and bottom of screen.
16:9: Use this itemwhen the unit is connected withthe wide screen TV set.
Wide-Squeeze: Use this item when the unit is connected to the wide-screen
TV set.
ANGLE MARK:
It will show the ANGLE mark when playing DVD disc with multi-angle view if
selection is ON.
OSD LANG:
Select on-screen display language.
CLOSED CAPTIONS:
This function doesn't work when the disc is without captions. If the caption is
OFF, press [SUBTITLE] key on the remote controller to turn the captions on.
SCREEN SAVER:
If the SCREEN SAVER is set ON and the unit is switched on without a disc
playing for several minutes, a moving picture appears on the screen and the
unit will go to standby modeafter 20 minutes. You can press the [STANDBY]
key on the remote controller to activate.
LAST MEMORY:
When this function is ON, the unit can memorize the time elapsed from the
last time you played the disc. When playing next time, it will resume playing
from the memorized time.
GENERAL SETUP PAGE
-8-
AUDIO SETUP PAGE
ANALOG AUDIO SETUP:
DOWNMIX:
LT/RT: The audio out is Left and Right channel formatting even if the original
sound is 5.1CH format.
M1389E21B-P8.CDR

System Setup
-9-
STEREO: The audio out format is stereo even if the original sound is 5.1CH
format.
3D SURROUND: The audio out is virtual surround sounds (only for 5.1CH
player)
5.1CH: Turn off DOWNMIX function. If playing 5.1CH discs or the unit is
connected with 5.1 channel amplifier, this item should be selected.(only for
5.1CH player)
DIGITAL AUDIO SETUP PAGE
DIGITAL OUTPUT:
SPDIF OFF: No digital output(coaxial off), only analog audio output.
ALL: If this item is selected, you can set up RAW.
PCM ONLY: In SPDIF/PCM mode, setup PCM channel according to your
preference.
LPCM OUT :
Select PCM frequencyat 48kHz or 96kHz.
Note: Some amplifiers don't support 96kHz sampling which will effect the
coaxial output.
FRONT, CENTER, REAR and SUB-WOOFER SPEAKER: (No this item in
2CH player)
If your speaker system includes the above speakers, you can set these
items according thereal speaker status.
DIALOG: The DIALOG mode is available, and you can press up and down
direction key to adjust it. (In the DOWNMIX mode, LT/RT or STEREO is
selected.)
D.R.C:The D.R.C can control data record. You can chose AUTO, ON and
OFF in this mode.
DUAL MONO:
Stereo: Set audiooutput to the stereo output.
L-mono: Set audio output to the mono-left channel.
R-mono: Set audio output to the mono-right channel.
Mix-mono: Set audio output to the mix-mono channel.
DYNAMIC:
Select this to reduce the overall volume and still keep defined audio sound.
You can press upand down directionkey to adjust it.
DOLBY DIGITAL SETUP
DA641-P9.CDR