AWILCO EnergySystem ES-2000 User manual

1
AWILCO Flexible Power Solutions awilco.dk
Need to extend battery capacity
to ES-2000?
All-In-One Energy System for vehicles and mobile use
How to extend battery capacity from 100Ah up to 600Ah
How to connect additional battery capacity
AWILCO ES-2000 has the unique feature that the system battery capacity can be extended from
the built-in 100Ah up to 600Ah of capacity (adding a total of max 5 extra 100Ah batteries), offering
longer runtime and higher autonomy for the user.
Note: It is important that you ONLY use the AWILCO battery LFP12100BM, and it is important you
only connect additional batteries to the system in parallel. Connecting additional batteries in serial
to ES-2000 will damage the components and warranty will void.
Overview connection guides:
•Extend ES-2000 with one LFP12100BM battery
•Extend ES-2000 with two or more LFP12100BM batteries
•The connector housing and cable assembly
•AWILCO Smart Battery Bluetooth app
AWILCO offers 100Ah lithium batteries which can be serially connected to ES-2000
LFP12100BM Battery LBXM Cable kit ES-2000 Energy system

2
AWILCO Flexible Power Solutions awilco.dk
How to connect additional batteries to ES-2000 in parallel
You can connect one or more LFP12100BM batteries to you ES-2000 Energy System. Note: Only
one cable per connector is necessary, please do observe that both terminal slots in the connector
must be filled - please refer to photos and explanation on how to insert uncrimped terminal
below.
How to extend ES-2000 with one battery
1. Connect the black connector on ES-2000 to the black connector on LFP12100BM, by means of
the supplied connectors and the black cable from the cable kit
2. Connect the red connector on ES-2000 to any of the red connectors on LFP12100BM
How to extend ES-21000 with up to 5 batteries in parallel
1. Connect the red connector on ES-2000 to any of the red connectors on the LFP12100BM
closest to ES-2000, by means of the supplied connectors
2. Connect the negative black cable, use the black connector on ES-2000 to the black connector
on LFP12100BM farthest from ES-2000
3. The black connector house on the farthest LFP12100BM must contain both the cable from ES-
2000 and the next farthest battery

3
AWILCO Flexible Power Solutions awilco.dk
4. Connect the following batteries from red to red and black to black until all batteries are
connected in serial
5. Or you can connect the positive cable to the LFP12100BM battery farthest from ES-2000 and
the negative cable to the LFP12100BM battery closest to ES-2000
How to insert the uncrimped terminal into the connector
1. Observe that the terminal pin must be inserted into the connector housing in a certain way -
Locate the circled “G” on both connector housing and terminal pin. Make sure that the circled
“G” is orientated in the same direction
2. Insert the terminal pin until you hear a clear “klick”, as the securing spring engages with the
terminal pin
How to extract uncrimped terminal from the connector
Note: The following method can be used on both terminal pins with and without cables.
1. Look into the front end of the connector housing, see the terminal pins. Underneath the
terminal pins you see the securing spring. Use a small flat head screwdriver to push the
securing spring, downwards, away from the terminal pin.

4
AWILCO Flexible Power Solutions awilco.dk
2. Once the spring releases from the terminal pin, the terminal pin can be extracted by pulling
from the rear of the connector housing.
Connector housing
The slot in the connector housing which is NOT used for a cable, must also have a terminal pin
inserted, in order for the connector to enter the counter connector correctly. The inserted pin can
easily be removed at a later point, should you require using the slot for i.e. additional extension
batteries.
AWILCO Smart Battery App
ES-2000 Energy system and LFP12100BM battery both have built-in Bluetooth communication.
Download the AWILCO app, and both the energy system and battery are displayed as separate
units, allowing the user to overview both units/all batteries in the complete installation.
Please note: It is important that you ONLY use the AWILCO battery LFP12100BM, and it is
important you only connect additional batteries to the system in parallel. Connecting additional
batteries in serial to ES-2000 will damage the components and warranty will void. For more
information please contact us on tele: + 45 5656 5400