B-Speech Bow Instruction Manual

● Instruction Manual and
Warranty Information
The combination of the Bluetooth ®
speaker and hands-free set in a visually
appealing design makes of B-Speech®
Bow a true all-rounder. It delivers full
sound when playing your music from
any Bluetooth® -capable source.
In addition to its outstanding music
playback features, the device is a full BT
hands-free set, suitable to place or
take wireless phone calls
with excellent voice quality as you enjoy
your favourite music.
User Manual
Getting started
1.Switching On /Off
Switch on
In the off state, switch the button to the „ON“ (right) position, the blue LED flashes
with an indication tone.
Switch off
Switch the button to the “OFF” (left) position, the red LED fl ashes with an
indication tone.
2 .Pairing
B-Speech® Bow must be paired with a Bluetooth® device before use.
This process is performed in two steps, one in Bow, and the other one in the
Bluetooth® device.
Note: Please note that different mobile phones may require different pairing
methods.
1. In the off state, switch the button to the „ON“ (right) position, the blue LED
flashes with anindication tone.
2. Now press and hold the multi-function button for 8 seconds to enter pairing
mode.
The LEDs will flashes alternately between blue and red to indicate that
B-Speech® Bow is in pairing mode.
1. Loudspeaker
2. Multi-function button
3. Microphone
4. LED
5. Micro-USB port
6. On/Off switch
7. Audio Line-in socket
B-Speech® Bow is equipped with an
internal rechargeable lithium-polymer
battery. Connect Bow via the micro-USB
cable provided. The cable can be
connected to a computer or a standard
USB power adapter. The red LED of
B-Speech® Bow lights up while charging.
The normal charging time is 1.5 – 2.5
hours. The red LED turns off when fully
charged. The cable can be disconnected
from B-Speech® Bow. A Low Battery
condition is indicated by red LED flashes
and a buzz every 30 seconds.
Note: Charge B-Speech Bow for at least
2.5 hours before initial use.
GB
BT Speaker with hands free function
B-Speech ® Bow
Line-in cable
User Manual
Mirco-USB charging cable
package contents
Charging the Unit
Overview
LED functions
Status
Pairing mode
Standby
Incoming call
During a call
Charging
Charging fi nished
LED
Red / blue LED fl ashes alternately Without
Bluetooth ® connection blue LED flashes once
every 3 seconds,by Bluetooth® connection once
every 5 seconds.
Blue LED fl ashes twice every 2 seconds
Blue LED fl ashes once every 5 seconds
Red LED remains on
Red LED turn off

3. Use your mobile phone, computer or another Bluetooth® transmitter in order to
search for Bluetooth® audio devices.
4. The Bluetooth® device should indicate that it has found „Bow“.
5. Confi rm pairing with Bow. Enter „0000“ if you are asked for a pairing code.
If you are unsure about the pairing procedure of your Bluetooth® device, please
check your de-vice manual. If using a Bluetooth® transmitter without display, place
this in pairing mode and wait a few seconds until the connection with
B-Speech® Bow is established.
Note: If the connection is lost or the transmitter is temporarily disconnected,
B-Speech® Bow automatically tries to restore the connection.
3. Music playback
To play music with B-Speech® Bow this must be connected to a Bluetooth® audio
source.
Now you can enjoy your favourite music wirelessly.
Note: The device must support the A2DP profi le for music streaming. Redial and
voice dial are deactivated during music playback.
Playback through Line-In
1. Connect the music playing device with the included line-in audio cable to the line-in
socket of the B-Speech® Bow.
2. In the off state, switch the button to the „ON“ (right) position, the blue LED fl ashes
with an indication tone.
3. The music will be now passed through the B-Speech® Bow.
4. Hands-free features
With its built-in microphone and intelligent noise reduction mechanism, the intelligent
B-Speech® Bow is perfectly suited for use as a hands-free phone.
5. Answer / End / Reject calls
To answer an incoming call, briefl y press the multi-function button.
To end an ongoing call, briefl y press the multi-function button, you will hear an
indication tone.
To reject calls, press and hold the multi-function button for 3 seconds, you will hear
an indication tone.
6. Redial
In standby mode, press the multi-function button for 3 seconds. The phone will
redial the last outgoing number.
7. Microphone mute
Press the multi-function button to deactivate the microphone. You will hear an
indication tone after the operation was successful. Repeat the operation to activate
the microphone.
8. Volume control
Double press the multi-function button to adjust the volume.
Technical data:
• BT V 3.0 / Class 2
• Profi le: A2DP, Hands Free, Headset
• BT Frequency: 2.402-2.480GHZ, 2.4G ISM Band
• Speaker max power output: 3 Watts
• Speaker frequency range: 30 Hz ~ 20 KHz
• Nominal Impedance: 4 Ohms ±15% at 1000Hz. ±15%
• Built-in Microphone
• Status LED: Red/Blue
• Micro USB Charging Port
• Rechargeable 400mAh Li-Polymer Battery
• Talk time: 12 hrs.
• Music plays time: 2 hrs.
• Standby time: up to 700 hrs.
• Dimensions: Ø 62 mm x H 82 mm
• Weight: 206 g
Note on environmental protection:
After the implementation of the European Directive 2002/96/ EU in the national legal system,
the following applies: Electrical and electronic devices may not be disposed of with domestic
waste. Consumers are obliged by law to return electrical and electronic devices at the end of
their service lives to the public collecting points set up for this
purpose or point of sale. Details of this are de fined by the national law of the respective country. This symbol
on the product, the instruction manual or the package indicates that a product is subject to these regulations.
By recycling, re-using the materials or other forms of utilising old devices, you are making an important
contribution to protecting our environment.
FCC Information
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received; including interference that may cause undesired
operation.
Federal Communications Commission (FCC) Statement
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.
Warning :
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. &
This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter.