BABY DELIGHT Go With Me Span User manual

1
Go With Me™Span
Expandable Folding Gate
Note:
Model #BD05410 This gate works in openings with a width of 30” – 48”
Model #BD05510 This gate works in openings with a width of 36” – 60”
Model #BD05520 This gate works in openings with a width of 42” – 72”
© 2019 Baby Delight, Inc. | 1-401-333-6800 | www.babydelight.com
MADE IN CHINA
Fabric cover Tension nutsTension nuts
Tension
bolts
Tension
bolts
Tension
bolts
Tension
bolts
Metal
frame
Unlocking levers
(under cover)
Tension
nuts
Tension
nuts
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE. Prior to using the product, check
that the product and all parts were not damaged during delivery.

2
Children have died or been seriously injured when gates are
not securely installed.
• ALWAYS install and use gate as directed using all required parts.
• STOP using when a child can climb over or dislodge the gate.
• Use ONLY with the 4 locking knobs securely tightened. Check
frequently and securely tighten as necessary.
• NEVER use a gate to keep child away from pool.
• NEVER use this gate at the top of stairs.
• NEVER leave child unattended.
• This product will not necessarily prevent all accidents. Proper
supervision is required at all times.
• NEVER use if any components are missing or damaged or if gate
becomes damaged, broken or disassembled.
• Adult assembly required. Exercise care when unpacking and
assembling product.
• Use only on openings between: Model #BD05410: 30” – 48”, Model
#BD05510: 36” – 60”, Model #BD05520: 42” – 72”
• Make sure the bottom of the gate is flat to the floor at each corner.
• NEVER step over gate.
• Make sure the four wall pads fit securely against wall or opening.
• NEVER use on rounded/curved surfaces.
WARNING: IMPORTANT!
KEEP FOR FUTURE REFERENCE!
Care & Instructions
Contents
Travel BagGate

3
1
3
2
4
Remove gate from bag, unfasten CLIP
and unfold GATE in a V shape.
With LOGO on the top rail, expand
GATE into doorway opening by pulling
apart left and right FRAMES until snug
in doorway. Make sure GATE is sitting
on the floor.
Open GATE to form a square.
NOTE: If you expand the GATE too
widely, simply place GATE on the floor
upright with logo facing sideways and
press the UNLOCKING LEVERS under
the FABRIC COVER at the same time
to compress gate to start Step 3 over.
Assembly/Operating

4
Assembly/Operating Continued
6
Repeat for bottom TENSIONING NUTS until entire GATE is tight in the doorway.
Note: For walls without molding, top and bottom gaps on each side between
GATE and doorway should be equal.
5
Rotate top TENSION NUT on right and
left side counter-clockwise until tight
in the door opening.

5
Assembly/Operating Continued
Rotate TENSION NUTS clockwise at each corner until GATE is loose enough to
remove from dooraway.
Removing from doorway and folding for travel:
1
2
Turn gate on its side with logo on the
righthand side and press UNLOCKING
LEVERS under the FABRIC COVER
on both sides at the same time to
compress gate. Gate should compress
to a square shape.
With CORNER HINGES facing you, fold opposite corners (without HINGES)
toward each other until GATE folds into a “V” shape. NOTE: If GATE does not
fold easily, re-expand gate and then compress again making sure gate is fully
compressed per Step 1.

6
Care & Cleaning
Assembly/Operating Continued
Caring for your new GoWithMe™Span Expandable Folding Gate is very easy.
• Regularly check TENSION BOLTS to make sure the GATE is securely in place.
• Do not use the GATE if any components are damaged or missing.
• Surface-clean with a damp cloth or sponge, using mild detergent and
warm water.
3 4
When in “V” Shape, fold until the
corners come together.
Snap clip together and place in bag
for storage.

7
Limited Warranty
At Baby Delight, Inc. we make innovative and high quality products for babies,
children and their parents. We warrant this product to be free from defects in
material and workmanship existing at the time of manufacture for a period of
90-days from the date of initial purchase (sales receipt is required for proof of
purchase). If such a defect is discovered during the limited warranty period, we
will, at our sole option, repair or replace your product at no cost to you.
This limited warranty does not cover claims resulting from misuse, failure to
follow the instructions on installation, maintenance and use, abuse, alteration,
involvement in an accident, and normal wear and tear.
For warranty service or replacement part information:
USA: Please call 1-401-333-6800, email [e-mail], or write to
Consumer Services: 30 Martin Street, Suite 3C, Cumberland, RI 02864
Some replacement parts may be available for purchase after this limited warranty
expires. Please visit us at www.babydelight.com or call us at 1-401-333-6800
or details.

8
www.babydelight.com
© 2019 Baby Delight, Inc. | 30 Martin Street, Suite 3C, Cumberland, RI, 02864, USA
1-401-333-6800 | [e-mail]
Patent Pending | BD05410, BD05510, BD05520