Baby Lock Elissimo & Elissimo GOLD BLSO-BF2 User manual

Thank you for choosing our Baby Lock product.
For additional Baby Lock product information and updates, visit our website
at www.babylock.com.
Information found in this guide is current at the time of printing.
Please be aware that some contents of this manual and product
specifications are subject to change without notice.
The examples used throughout this guide are screens shots taken from
Windows 7.
Read this guide before installing.
Nous vous remercions d’avoir choisi notre produit Baby Lock.
Pour plus d’informations sur les produits Baby Lock et les mises à jour,
visitez notre site Web à l’adresse www.babylock.com.
Les informations contenues dans de ce guide sont à jour au moment de
l’impression.
Le contenu de ce guide et les spécifications de ce produit peuvent être
modifiés sans avis préalable.
Les exemples utilisés dans ce guide sont des copies d’écran de Windows 7.
Lisez ce guide avant de procéder à l’installation.
Gracias por elegir nuestro producto Baby Lock.
Si desea obtener actualizaciones o información adicional acerca de los
productos Baby Lock, visite nuestro sitio web www.babylock.com.
La información que se encuentra en esta guía está actualizada al momento
de la impresión.
Tenga en cuenta que parte del contenido de este manual y las
especificaciones del producto están sujetas a cambios sin previo aviso.
Los ejemplos utilizados en esta guía son capturas de pantalla de Windows 7.
Lea esta guía antes de la instalación.

1
ENGLISH
CONTENTS
Accessories ................................................................................ 2
Contents of CD-ROM ................................................................. 2
Installation Overview ................................................................. 3
Computer Requirements............................................................. 3
Installation Procedure................................................................. 3

2
Accessories
The following items are included with your purchase.
Please verify all contents and if anything is missing or
damaged, contact your authorized Baby Lock retailer.
• CD-ROM (For details regarding contents, refer to
the following.)
• Installation Guide (this guide)
In addition, this kit contains the border embroidery
frame.
• Border embroidery frame and embroidery sheet
30 cm x 10 cm (approx. 11-3/4 inches x 4 inches)
This frame is useful for embroidering repeated
patterns since the fabric can easily be
repositioned and rehooped while sliding the
fabric.
An area of 30 cm x 10 cm (approx. 11-3/4 inches
x 4 inches) can be embroidered.
Also, the embroidery positioning stickers and white
stickers (solid) are included. These are necessary for
using the pattern connecting function. Refer to the
Instruction and Reference Guide for use.
• Embroidery positioning sticker sheets
• White stickers (solid)
Contents of CD-ROM
• Certification Key Issuing Wizard
• Ellisimo GOLD and Ellisimo Embroidery
Upgrade III Instruction and Reference Guide
(PDF)
* Adobe Reader is required for viewing and printing the
Instruction and Reference Guide.
• Upgrade application for KIT III
• 10 embroidery patterns
Note
• For details on proper use of the included
accessories see the Instruction and Reference
Guide viewable from the disc by clicking on the
“manual” folder and selecting your preferred
language.
You may also view the Instruction and Reference
Guide by clicking on the “manual_index.pdf” icon
contained within the disc and selecting your
preferred language.
Note
• Upgrade application data is contained in the
“BLSO_BLSOG” folder.

3
ENGLISH
Installation Overview
First, use the Certification Key Issuing Wizard on the
enclosed CD-ROM to obtain a Certification Key. Then,
use the CERTIFICATION key within the Settings screen,
page 5, to activate the upgrade application for KIT III on
the sewing machine.
In the procedures section, indicates operations
performed with the sewing machine and
indicates operations performed with the computer.
[Step 1] Make a note of the internal
machine identification number (No.).
[Step 2] Insert the CD-ROM into the
computer’s CD-ROM drive, and then
start the Certification Key Issuing
Wizard.
[Step 3] Follow the wizard instructions
for obtaining the Certification Key.
[Step 4] Install the upgrade application
for KIT III on the sewing machine.
[Step 5] Remove the USB media, and
turn the machine off and then on again.
[Step 6] After the upgrade has been
successfully installed, certify the “KIT III”
in the Settings screen of the sewing
machine.
Computer Requirements
Before starting the Certification Key Issuing Wizard,
check that the computer to be connected meets the
following operating conditions.
* “IBM” is a registered trademark of IBM Corporation in the United
States and other countries.
* “Windows XP”, “Windows Vista”, and “Windows 7”, are registered
trademarks of Microsoft Corporation in the United States and other
countries.
* Each company whose software title is mentioned in this guide has a
Software License Agreement specific to its proprietary programs.
All other brands and product names mentioned in this guide are
registered trademarks of their respective companies. However, the
explanations for markings such as ®and ™ are not exhibited
clearly within the text.
Installation Procedure
The following procedure describes how to upgrade
your sewing machine to KIT III.
aMake a note of the 10-digit number (internal
machine identification number) displayed
beside “No.” on page 5 of the Settings screen.
Computer IBM-PC or compatible computer
Operating System Windows XP, Windows Vista
and Windows 7
CD-ROM drive Required for installation
Others Internet connection available
and one available USB port
(required to upgrade the sewing
machine) when using computer
Note
• If the procedure described below is not fully
completed, your sewing machine cannot be
upgraded to KIT III.
• Access to the Internet is required in order to obtain a
Certification Key.
Memo
• Make sure the internal machine identification
number (No.) is recorded accurately as these
numbers need to be entered within the Certification
Key Issuing Wizard in order to obtain the
Certification Key.

4
* The number of pages in the Settings screen may differ depending
on the version.
bInsert the CD-ROM into the computer’s CD-
ROM drive.
cOpen the designated drive for your CD-ROM
(usually the “D” drive) on the computer (My
Computer), double-click to start the
Certification Key Issuing Wizard.
→The Select Language dialog box automatically
appears.
dSelect the desired language, and then click
OK.
→KIT III Certification Key Issuing Wizard appears.
eCarefully read the information that appears,
and then click Next.
fThe Wizard checks for the latest program on
the web.
If the file on the CD-ROM is the latest upgrade
file the following window appears. Click Next.
Internal
machine
identification
number (No.)
Version
number
Note
• The internal machine identification number that
appears beside “No.” is different from the machine
serial number (SER. NO.) located on the label
attached to the back of the sewing machine.
Memo
• In Windows 7 or Windows Vista, when the AutoPlay
dialog box appears, click Open folder to view files.
Memo
• The following procedure can be used to start the
Certification Key Issuing Wizard.
1. Click Start.
2. Click Run or in the search box, type run, and
then, in the list of results, click Run.
→The Run dialog box appears.
3. Type the path to the application file
(D:\KeyWizard_Kit3.exe), and then click OK.

5
ENGLISH
If the latest upgrade file is on the web select
your model and click Download, then save the
upgrade program (************.upf) on your
computer. Click Next.
gType in the 15-digit CD key found on the label
attached to the CD-ROM envelope of the
upgrade kit, and then click Next.
If the following error message appears
Check below list for possible entry error(s).
To close the message, click OK.
• Are symbols or characters other than letters and
numbers entered?
• Has the uppercase letter “I” been entered in place of
the number “1”?
• Has the uppercase letter “O” been entered in place
of the number “0”?
hType in the internal machine identification
number (No.) written down in step a, and
then click Next.
If the following error message appears
Check that symbols or characters other than
numbers have not been entered. To close the
message, click OK.
iCarefully verify that the information has been
entered correctly and then click the Certify
button.
Note
• If the displayed version has already been installed in
the machine, click Next to continue with the
procedure without downloading the latest file.
Memo
• To help eliminate any confusion between the
number “0” and the uppercase letter “O” or “1” and
the uppercase letter “I”, the uppercase letter “O”
and “I” are not used in the CD Key. Also, no symbols
are used in the CD key.

6
• To change the entered information, click Back.
→Connect to the certifying server, and then obtain the
upgrade Certification Key.
If the following error message appears
• Verify that the CD key and internal machine
identification number (No.) have been entered
correctly, and then repeat the procedure from step
c. To close the message, click OK.
• The CD Key is valid for use with only one
designated internal machine identification number
(No.).
Check that the CD key has been entered correctly,
and then repeat the procedure from step c. To
close the message, click OK.
• Check the Internet connection, and then click
Certify again. To close the message, click OK.
jWrite down the 8-digit Certification Key that
appears.
kClick Finish.
If the latest program has already been
installed in the machine
Skip the steps lto q, and then start the
procedure from step r.
lWhile pressing the “Automatic Threading”
button, turn the sewing machine on.
Use USB media or a computer to install the upgrade
application for KIT III on the sewing machine.
If USB media is to be used, refer to the instructions that
follow.
If a computer is to be used, refer to page 8.
Note
• In order to obtain the Certification Key, a connection
to the Internet must be established.
Note
• After upgrading the sewing machine to KIT III, the
Certification Key must be entered in the sewing
machine Settings screen.

7
ENGLISH
When using USB media to perform the installation
mCopy Upgrade application for KIT III
(************.upf) from the CD-ROM to the
USB media.
If you downloaded the latest program in step
f, copy the file (************.upf) from your
computer.
nPress .
oInsert the USB media into the primary (top)
USB port connector on the right side of the
machine.
pPress .
qRemove the USB media.
Continue with step ron page 9.
Note
• Upgrade application data is contained in the
“BLSO_BLSOG” folder.
• Copy only the Upgrade application for KIT III to
the USB media; no other files should be on the
media.
Note
When the message “Upgrade complete.” appears,
installation of the upgrade application has been
completed.
(If an error occurs, a message will appear in red.)

8
When using a computer to perform the installation
mPress .
nPlug the USB cable connectors into the
corresponding USB port connectors for the
computer and for the machine.
→Removable Disk appears in Computer (My
Computer).
oCopy Upgrade application for KIT III from the
CD-ROM to Removable Disk.
If you downloaded the latest program in step
f, copy the file (************.upf) from your
computer.
pPress .
Note
• Upgrade application data is contained in the
“BLSO_BLSOG” folder.
• The “Connected to PC. Do not disconnect the
USB cable”. message appears on the sewing
machine LCD screen.
Note
• When the message “Upgrade complete.” appears,
installation of the upgrade application has been
completed.
(If an error occurs, a message will appear in red.)