Backyard Expressions 908269 User manual

5ft Ground Blind with 8 shoot through mesh windows ( HTC fall Fabric)
UPC#:908269
Parts List
ITEM DESCRIPTION QTY ILLUSTRATION
ACorner Post 2
BCorner Post 2
CPanel 2
DPanel 1
FSupport Beam 1
GCross Beam 10
HLintel 1
IBase Plate 4
JBolt M6x50mm 1M6x50mm
KBolt M6x35mm 27 M6x35mm
LBolt M6x15mm 20 M6x15mm
MNut M6 10 M6
NWasher M6 37 M6
ONut Cap M6 10 M6
P "U" Connector 10
QCup Holder 1
R
Gunstock 1
S
Fabric Top 1
T
Fabric Bottom 1
Bow Holder 1
E
Hex Wrench 2Wrench 1
Panel 1
U
Ground Stakes 16
V
1
W8Mesh

A
A
BB
Step 1
Connect corner post A and base plate I with bolt L (M6x15mm) and washer N (M6).
Connect corner post B and base plate I with bolt L (M6x15mm) and washer N (M6).
LN
NL
Step 2
Connect corner posts A and B and panels C, D, and E with bolt K (M6x35mm) and
washer N (M6). Connect Corner posts A and B and Panels D, E, and P with bolt K
(M6x15mm.) Connect U connecters (part P) on all posts with bolt L (M6x15mm).
L
L
I
C
C
D
E
KNK
N
2

Step 3
Connect support beam F and Lintel H with bolt J (M6x50mm) and washer N. Then use
the push pins to connect cross beams G into Lintel H.
Step 4
Connect cross beam G and the rest of the frame with bolt K (M6x35mm) and washer N
using the U connector. This should be repeated 10 times until all cross members are
securely fastened.
J
N
G
H
G
H
G
G
G
G
G
G
G
G
G
G
F
K
N
M
O
N
K
3

Step 5
Use Fabric top T to cover the top of the blind.
Step 6
Enclose the bottom half of the blind using fabric bottom U. Attach shoot through mesh (W)
on each of the 8 windows.
T
U
V
4
W
W

5

6
Customer Name
Mailing address
Phone number
Email address
Item name
5ft Ground Blind with 8 shoot through mesh windows ( HTC fall Fabric)
Item UPC Code
681129082698
Date of purchase
Name of Store
Specific Issue
Part needed –
please identify
from assembly
instructions
Please keep original purchase receipt for best service
Emails are responded to daily and are the most accurate way to
communicate item/parts needs.
This form is also available online at: http://ddiretail.com/contact-us/
–if you prefer you may also leave a message or send a text to this number: 1-612-888-7550–
Your message will be replied to in the order received.
Please help us give you the best
possible service by emailing your
parts & service needs to:
[email protected]
http://ddiretail.com/contact-us/