BackYardCity Super Tube User manual
Super Tube Spiral Slide
Instructions
5/16” X 1” BOLT W/WASHERS AND LOCK NUT
5/16” X 3/4” BOLT W/WASHER
2 SECTIONS WITH OVER-
LAPPING FLANGES
3 SECTIONS WITHOUT
OVERLAPPING FLANGES
*** THIS PRODUCT IS INTENDED FOR RESIDENTIAL USE ONLY.***
3-1/2” LAG SCREW W/WASHER
Super Tube Spiral Slide
STEP 1: ATTACHING ENTRANCE TUBE TO THE CORNER POSTS
Bottom of large circular opening in
the TOP of the deck.
FACE PLATE
ENTRY
the RIB vertical and the CURVED SECTION facing down. The RIB in the CURVED SECTION will get ro-
-
mid-line and RIB.
Mid-Line
RIB
Rotate RIGHT
TWO holes.
FACE PLATE
ENTRY SECTION
SECTION
Now that the second CURVED SECTION aligning
the RIBS in the sections. The CURVED SECTIONS should make a “U” shape at this point. Rotate the RIB
in the second CURVED SECTION two holes to the LEFT. Fasten the second CURVED SECTION to the
CURVED SECTION
RIB
second CURVED SECTION
-
EXIT PIECE
Locate the FOOT STAND PIECE. Rotate the FOOT STAND PIECE so that the there is one hole showing on
PIECE.
FOOT STAND PIECE
EXIT SECTION
SECTION so that the foot rests squarely on the ground. Fasten the EXIT SECTION to the second CURVED
Fasten
NOTE: OTHER SECTIONS NOT SHOWN FOR CLARITY.
second
CURVED
SECTION
EXIT SECTION
Popular Play Set & Playground Equipment manuals by other brands
stilum
stilum intera Mounting instructions
NORDIC PLAY
NORDIC PLAY 805-449 Instruction
Sove
Sove 50-151-761 Assembly instructions
Ledon
Ledon Ben LB083G Assembly instructions
NOVUM
NOVUM Action4Kids MKP-J8004-002 Assembly instructions
PlayNation Play Systems
PlayNation Play Systems Adelade Riviera Roof 1500JWR Assembly instructions
