Ballard Designs FO062 User manual

PRODUCT NAME: UMBRELLA CANOPY & FRAME
ITEM NUMBER: FO062
DIMENSIONS OF ITEM ASSEMBLED: 9’ DIAMETER
REPLACEMENT CANOPIES ALSO SOLD SEPARATELY (FO026)
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE. Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING: We recommend that you always close and tie the ropes around your
umbrella in windy conditions as well as when not in use to avoid damage to your
umbrella frame and table top. Always secure umbrellas in at least a 50 lb. umbrella
base. WIND DAMAGE is NOT COVERED under any umbrella warranty.

Arm of Frame
Arm Pocket
of Canopy
Arm of Frame
Arm Pocket
of Canopy
Page 2 of 4
STEP 1: With the frame closed, unscrew finial
counter clockwise from top
Attaching Canopy
STEP 2: Unscrew finial from top
of the umbrella frame.
STEP 3: Gently place each arm of frame in their correlating arm
pocket in the canopy. Make sure each arm is securely
in their pocket (total of 8 arms/pockets).
Frame
Finial
Crank
STEP 4: Reattach the finial by turning it clockwise into the frame extrusion.
STEP 5: Slowly crank the handle clockwise & partially open the
umbrella to ensure that the canopy is securely attached.
STEP 2: Slide canopy over top of frame. Line up
the metal ring in the canopy top to the extrusion
in the top of the frame. Then pull canopy over frame.
Metal Ring
in Canopy
Extrusion for
metal ring
Canopy

Arm of Frame
Arm Pocket
of Canopy
Arm of Frame
Arm Pocket
of Canopy
Page 3 of 4
STEP 1: Wind the umbrella to
the closed position.
Removing Canopy
STEP 2: Unscrew finial counter clockwise
from top of the umbrella frame.
STEP 3: Gently pull downwards on the arm pockets,
removing the canopy from the frame (total of 8 arms).
Metal Ring
in Canopy
Finial
STEP 4: Remove Canopy

Instructions for working the umbrella
Page 4 of 4
Thank you for your business!
clockwise counter
clockwise
To Open: When the umbrella is closed, crank
the handle clockwise until umbrella is extended
to desired height.
To engage Tilt: Once the umbrella is open, keep cranking clockwise
& the umbrella will begin to tilt. Stop cranking the handle once
you have reached the desired tilt. The maximum tilt is 35.
To return to upright position: Crank the handle counter
clockwise to return the umbrella to its straight position.
To Close: crank handle counter clockwise until it has
reached maximum closure. Then tie the ropes around the
closed umbrella.