Ballard Designs JU031 User manual

PRODUCT NAME: Auto Tilt Umbrella 9’ or 11’
ITEM NUMBER: JU031
ASSEMBLED DIMENSIONS: 8’ 2”H x 9’ Diameter or 8’ 6”H x 11’ Diameter
Page 1 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
- Close Umbrella and secure ties during windy conditions or when Umbrella is not in use.
- Umbrella must be anchored and secured in a 50lb minimum Umbrella Base.
WIND DAMAGE IS NOT COVERED UNDER ANY UMBRELLA WARRANTY
WARNING
PRODUCTS NOT INTENDED
FOR COMMERCIAL USE
UPDATED: 6-22-2020
REPLACEMENT CANOPIES SOLD SEPARATELY

Arm of Frame
Arm Pocket
of Canopy
Arm of Frame
Arm Pocket
of Canopy
Page 2 of 4
STEP 1: With frame closed, unscrew finial
counterclockwise from top
Attaching Canopy
STEP 3: Gently place each arm of frame in corresponding arm
pocket in canopy. Make sure each arm is securely
in pocket (total of 8 arms/pockets).
Frame
Finial
Crank
STEP 4: Reattach finial by turning it clockwise into frame extrusion.
STEP 5: Slowly crank handle clockwise & partially open
umbrella to ensure canopy is securely attached.
STEP 2: Slide canopy over top of frame. Line up
metal ring in canopy top to extrusion
in top of frame. Then pull canopy over frame.
Metal Ring
in Canopy
Extrusion for
metal ring
Canopy
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Arm of Frame
Arm Pocket
of Canopy
Arm of Frame
Arm Pocket
of Canopy
Page 3 of 4
Removing Canopy
STEP 1: Unscrew finial counterclockwise
from top of umbrella frame.
STEP 2: Gently pull downward on arm pockets,
removing canopy from frame (total of 8 arms).
Metal Ring
in Canopy
Finial
STEP 3: Remove Canopy
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Operating Umbrella
Page 4 of 4
clockwise counter
clockwise
To Open: From closed position, crank
handle clockwise until Canopy is extended
to desired height.
To engage Tilt: Once Canopy is open, keep cranking clockwise
until Canopy begins to tilt. Stop cranking handle once
desired tilt has been reached. NOTE: Maximum Tilt 35 degrees.
To return to upright position: Crank handle counter
clockwise to return Canopy upright..
To Close: Crank handle counter clockwise until Canopy has
reached maximum closure. Wrap and secure ties on
closed Canopy.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com