B&S e-VISION 80 LED User manual

LED Interactive Display
e-VISION 70/80 LED
User’s Manual

Copyright ( ) 2012 B&S MEDIA Co.,Ltd. All rights reserved.
#703 JnK DigitalTower, 111, Digitalro-26gil, Guro-gu, Seoul, Korea
B&S MEDIA Co., Ltd.
Technical Support Center : [phone]
Fax : [phone]
www.bnsmedia.com
●
●
●
LED Interactive Display
e-VISION 70/80 LED

www.bnsmedia.com 03
Contents
1. Before Use
1.1 Safety Instructions
1.2 Features
1.3 Package Components
1.4 Shape of Product
1.5 Name of Each Component
1.6 Connection
1.7 Remote Controller
2. How to Use
2.1 How to Use Product
2.2 Picture Adjustment
2.3 Sound Adjustment
2.4Time / PC Screen / Initialization
3. Additional Instructions
3.1 Fault Diagnosis before A/S
3.2 Customer Support & A/S
04
17
27

1. Before Use
www.bnsmedia.com
04
1.1 Safety Instructions
LED Interactive Display
Do not use a damaged or loose plug.
-This may cause electric shock or re.
Do not pull the plug out by the wire nor touch the
plug with wet hands.
-This may cause electric shock or re.
Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or
equipment damage.
Insert the power plug rmly so that it does not come loose.
- A bad connection may cause re.
Do not excessively bend the plug and wire nor place heavy
objects upon them, which could cause damage.
-This may cause electric shock or re.
Do not connect too many extension cords or plugs to one outlet.
-This may cause re.
Do not disconnectthe power cord while using this product.
- A surge may be caused by the separation and may damage
this product
Do not use the power cord when the connector or plug is dusty.
- If the connector or plug of the power cord is dusty,
clean it with a dry cloth.
- Using the power cord with a dusty plug or connector may cause
electric shock or re.

e-VISION 70/80 LED USER’S MANUAL
www.bnsmedia.com 05
Do not use a damaged or loose plug.
-This may cause electric shock or re.
Do not pull the plug out by the wire nor touch the
plug with wet hands.
-This may cause electric shock or re.
Use only a properly grounded plug and receptacle.
- An improper ground may cause electric shock or
equipment damage.
Insert the power plug rmly so that it does not come loose.
- A bad connection may cause re.
Do not excessively bend the plug and wire nor place heavy
objects upon them, which could cause damage.
-This may cause electric shock or re.
Do not connect too many extension cords or plugs to one outlet.
-This may cause re.
Do not disconnectthe power cord while using this product.
- A surge may be caused by the separation and may damage
this product
Do not use the power cord when the connector or plug is dusty.
- If the connector or plug of the power cord is dusty,
clean it with a dry cloth.
- Using the power cord with a dusty plug or connector may cause
electric shock or re.
Do not drop this product when moving it.
-This may cause damage to the product or the person carrying it.
Keep any ammable objects such as candles, insecticides or
cigarettes away from the product.
- Otherwise, this may cause re.
Keep any heating devices away from the power cable.
- A melted coating may cause electric shock or re.
Put down this product carefully.
- Failing to do so may damage this product
Do not place this product face down.
-This may damage surface of this product.
The installation of the bracket must be done by a qualied professional.
- Installing the bracket by unqualied personnel may result in injury.
- Always use the mounting device specied in the owner’s manual.
When installing the product, make sure to keep it away from the wall
(more than 10 cm / 4 inches) for ventilation purposes.
- Poor ventilation may cause an increase in the internal temperature of the
product, resulting in a shortened component life and degraded performance.
Do not spray water or detergent directly onto this product.
This may cause damage, electric shock or re.

www.bnsmedia.com
06
LED Interactive Display
Keep the product away from places exposed to oil, smoke or
Moisture do not install inside a vehicle.
-This may cause a malfunction, electric shock or re.
- In particular, avoid operating this product near water or
outdoors Where this product could be exposed to snow or rain.
Disconnect the plug from the outlet during storms or lightning or
if it is not used for a long period of time.
- Failure to do so may cause electric shock or re.
Do not install the product on an unstable, uneven surtace or a
location prone to vibrations.
- Dropping the product may cause damage to the product or the person carrying it.
Using the product in a location prone to vibrations mayshorten
the lifetime of the product or may cause the product to catch re.
When removing batteries from the remote control, be careful that
they are not swallowed by children. keep the batteries out of
children’s reach.
- If the batteries are swallowed, see a doctor immediately.
When replacing batteries, place the batteries in the correct +/-
polarity position as indicated on the battery holder.
-The incorrect polarity may cause a battery to break or leak and
Cause re, injury, or contamination (damage).
Use only specied standard batteries. Do not use new
and used batteries together.
-This may cause a battery to break or leak and may cause
re, injury, or contamination (damage).
The batteries (and rechargeable batteries) is not ordinary refuse
and must be returned for recycling purposes.
The customer is responsible for returning the used or rechargeable
batteries for recycling purposes as the consumer.
-The customer can return used or rechargeable batteries to a nearby
Public recycling center or to a store selling the same type of
the battery or rechargeable battery.

www.bnsmedia.com 07
e-VISION 70/80 LED USER’S MANUAL
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong.The wide blade or the third prong are provided for your safety. If the provided
plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Do not expose this apparatus to dripping or splashing and ensure that no objects
lled with liquids, such as vases, are placed on the apparatus.
16.To completely disconnect this apparatus from the AC Mains, disconnect the power
supply cord plug from the AC receptacle.
17.The mains plug of the power supply cord shall remain readily operable.
18. An apparatus with CLASS I construction shall be connected to a Mains socket outlet
with a protective earthing connection.
Note: Prolonged use of headphones at a high volume may cause health damage on your ears.
The lightning ash with arrowhead symbol within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s en-
closure that may be of sufcient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the product.

www.bnsmedia.com
08
1.2 Features
LED Interactive Display
Enjoy like in aTheater with High-denition Video & stereophonic sound!
1. Adopted Cutting edge LED-LCD Display Panel
Enjoy video by easy connection with PC!
2. Recognizes automatically if connecting with PC as supporting
VESA Plug & Play
3. Enjoy audio & video simultaneously by connecting with PC Audio
Signal Cable with is Extra product.
4. Change screen size variously depending on situation.
5. Supports perfect digital audio and video by adopting HDMI.
6. Power Consumption decreased by realizing Sleep Mode for Energy
Conservation

www.bnsmedia.com 09
1.3 Package Components
e-VISION 70/80 LED USER’S MANUAL
※
The pictures of Package Components are for user’s comprehension and can be
different from real product.
User’s Manual Power Cable Remote Controller,
Battery
Manual
LED Body
Cable Others

www.bnsmedia.com
10
LED Interactive Display
1.4 Shape of Product
※
Shape of Product can be different from each inch.

www.bnsmedia.com 11
e-VISION 70/80 LED USER’S MANUAL
1.5 Name of Each Component
1 4 7 6 89 10
51413 1223 11
A. LED / IR
B. OSD KEY : POWER / MENU / SOURCE / VOL+ / VOL- / CH+ / CH-
BA
1. AC Power Input Port
2. HDMI 2 Input Port
3. HDMI 1 Input Port
4. Audio(Line Audio) Output Port
5. Digital Audio Output (Optical) Port
6. PC Input Port
7. Service Port/pc Audio Input Port
9. Component Input Port
10. Component Audio Input Port
11. AV/ Audio Input Port
12. S-Video Input Port
13. USB JACK(TOUCH)
14. RS232

www.bnsmedia.com
12
LED Interactive Display
1.6 Connection
Video(Composite) / S-Video Connection
S-Video Input
AV1 (Video/Audio Input)
TV Output
(L)Sound
Output(R)
Video Output S-Video Input
Antenna Input
Video Connection
Connection
1. Connection Guide
1.1 Video (Composite) Cable: In case of Audio/Video (composite) Cable,
be careful of color. (Video –Yellow, Audio – White, Red)
1.2 S-Video Cable: If a VCR you have supports S-Video output, connect
S-Video Input of VCR to S-Video Input of this product. Audio Cable can
be connected in same way. (White, Red)
Watching VCR
1.Turn on this product. Select connected input source by pressing [Source]
button on remote controller
2.Turn on VCR, insert a video tape and press [Play] button.

www.bnsmedia.com 13
e-VISION 70/80 LED USER’S MANUAL
Video(Composite) / S-Video connection
Connecting Cable Receiver or satellite Receiver
Connection
1. Connecting Antenna Cable to Cable Box/Satellite Receiver:
Connect a antenna cable of 75-Ohm to input port of cable box/satellite receiver.
2. Connection Guide
2.1 How to Use Video (A/V) Cable
• Video Connection: Connect Video Input Port of this product to Video Output
Port of Video Cable Box/ Satellite Receiver
Video Cable Output Port isYELLOW..
• Audio Connection: Connect Audio Input Port of this product to Audio Output
Port of Video Cable Box/ Satellite Receiver
Audio Cable Output Ports are WHITE & RED.
2.2 How to Use S-Video Cable (In case that S-Video is supported)
• Video Connection: Connect S-Video Input Port of this product S-Video) to
Video S-Video Output of Cable Box/Satellite Receiver by cable.
• Audio Connection: Connect Audio Input Port of this product to Audio
S-Video Output of Cable Box/Satellite Receiver by cable.
Audio Cable Output Ports are WHITE & RED..
Video (Composite)
S-Video Cable
(L)Sound
Output(R)
Video OutputS-Video
Antenna Input

www.bnsmedia.com
14
LED Interactive Display
Component HDMI
DVD Connection
Watch Cable /Satellite Broadcasting
1.Turn on this product. Select connected Input Source by pressing Source button
on remote controller.
2.Turn on Cable Box/Satellite Receiver. Select Channel you want to watch.
Component Cable
Sound Cable
Sound Input Y
Y
Pb
Pb
Pr
Pr L R
Output(R)
Component
Input Port
(L)Sound
HDMI Cable
HDMI Output

13
www.bnsmedia.com 15
e-VISION 70/80 LED USER’S MANUAL
Connection
1. Connection Guide
1.1 How to Use Component Cable (Green, Blue and Red)
• Video Connection: Connect Component Input Port of to Component Output
of DVD Player/ Video Machine DVD by this product Component Cable.
Input / Output ports are GREEN, BLUE and RED.
• Audio Connection: Connect audio input port of this product to component
port of DVD player/video game machine by audio cable. Audio cable output
ports are WHITE/RED. Audio ports are usually located on component ports.
* Right connection of audio ports Left/Right is needed for component connection.
If Left/Right are connected wrongly, it might not sound.
1.2 HDMI :There should be HDMI ports on both input & output devices.
HDMI signal consists of audio signal and video signal.There is no need of
additional audio cable connection.
How to Use DVD Player/Video Game Machine
1.Turn on this product. Select Input Source by pressing Source button on remote
controller
2.Turn on DVD Player

www.bnsmedia.com
16
LED Interactive Display
1
7
6
15
8
12
2
13
3
4
5
15
9
14
10
11
1.7 Remote Controller
1Power Power On/Off
2Mute It does not sound temporarily.
3SOURCE Select the input source
connected with other products.
4DISPLAY
5Direction
Button
Used when move and adjust
on Menu Window.
6Menu Shows Menu Window.
7SLEEP Sets up time to be turned off.
8VOL Adjusts volume of sound.
9EXIT Removes directly Menu window
10 AUTO Adjusts automatically on PC
11 S.MODE Please refer to audio
adjustment page
12 P.MODE Please refer to picture
adjustment page
13 ASPECT Adjusts screen size
14 EPG No support
15 FAV No support

2. How to Use
2.1 How to Use Product
www.bnsmedia.com 17
e-VISION 70/80 LED USER’S MANUAL
Press Menu Button.
Select screen to control with Direction Button( ◀.▶ ) and Select Direction
B utton ( ◀.▶ ) item to adjust
Exit by pressing Menu Button
If you change Input Source, press Input Source
and select source after moving( ▲.▼ ).
Video Settings Menu
Time/Caption/PVR/PC Menu
Audio Settings Menu

www.bnsmedia.com
18
2.2 Picture Adjustment
LED Interactive Display
VIVID CUSTOMTHEATERSTANDARD
How to Control Picture Mode
Select picture mode congured automatically or select picture status you
want with picture mode button
1. Press Menu Button
2. Select Picture Control Mode and Item with Direction Button ( ◀.▶ )
It changes as below whenever pressing.
3. Exit by pressing Menu Button

www.bnsmedia.com 19
e-VISION 70/80 LED USER’S MANUAL
How to Control Picture Directly
This is function for user to control picture directly.
Contrast: Adjusts difference between brightness and darkness of
object and background.
Brightness: Adjusts between brightness and darkness of whole screen.
Color: Adjusts color between vivid or tender.
Tint: Adjusts tint of object.
Sharpness: Adjusts outline of object.
1. Press Direction Button (▶) after selecting 【Brightness】with Direction Button (▲.▼)
2. Press OK button after adjusting with Direction Button ( ◀.▶ )

www.bnsmedia.com
20
LED Interactive Display
2.2 Picture Adjustment (Advanced Video)
How to adjust BackgroundTint
It is possible to adjusts color temperature in order of Cool Normal Warm.
1. Press Direction Button (◀.▶) and select BackgroundTint you want after
Selecting 【ColorTemperature】with Direction Button (▲.▼)
It changes like below.
Cool:This results in a blue tone.
Normal:This is standard color setting.
Warm:This results in a reddish tone.
2. Exit by pressing Menu Button.
WARM NORMALCOOL