Baroness SP05A Operation manual

Bunker Rake
Owner's Operating Manual
Serial No. SP05A：20699-
"Required reading"
Read this manual and the Owner's Manual for the engine before using the machine.
Original Instructions Ver.1.2

Thank you for purchasing the Baroness machine.
This manual explains proper handling,
adjustment, and inspection of your machine.
Prior to use, carefully read this manual to
thoroughly understand the contents for safe and
correct operation.
We hope you will use the machine safely, and
take advantage of its best performance.
Keeping the Owner's Operating Manual
Keep this Owner's Operating Manual in the box
on the right side of the seat.
1
bhf6qq-004
Keeping the Owner's Operating Manual_001
1Box
SP05A
Greeting

Read this manual carefully to ensure that you thoroughly understand how to properly operate and maintain this
machine, and to avoid causing injury to yourself or others.
The operator is responsible for operating the machine properly and safely.
Do not perform maintenance on the machine other than that described in this manual.
Be sure to also read the Owner's Manual for the engine, battery, etc.
Maintenance should only be performed by a certified specialist.
If you have any questions concerning maintenance or genuine parts, please contact your local Baroness dealer or
Kyoeisha.
When making inquiries about this machine, please specify the machine's model designation and serial number.
When loaning or transferring this machine, please also provide this manual together with the machine.
Kyoeisha Co., Ltd.
Caution
The information described in this manual is subject to change for improvement without prior notice.
When replacing parts, be sure to use genuine Baroness parts or parts designated by Kyoeisha.
Note that the Baroness product warranty may not apply to defects caused by the use of parts from other
companies.
Warning Symbols
This manual uses the following warning symbols for handling precautions that are important for your
safety.
696cq5-001
Warning symbol
This symbol indicates the articles regarding “Danger,” “Warning,” or “Caution.”
Those articles describe important safety precautions and so read them carefully to understand completely before
operating the machine.
Failure to adequately follow these safety precautions may cause an accident.
Danger
Danger
This symbol indicates that serious injury or death will occur if the warning is ignored.
Warning
This symbol indicates that serious injury or death may occur if the warning is ignored.
Caution
This symbol indicates that injury or damage to property may occur if the warning is ignored.
Important
This symbol indicates precautions on the mechanism of the machine.
SP05A
Introduction

Purpose
This machine is intended for leveling bunkers at
golf courses.
Do not use this machine in any other way than
its intended purpose, and do not modify the
machine.
Operating this machine for other purposes and
modifying it may be very dangerous and may
cause damage to the machine.
In addition, this machine is not authorized for
operation as a special motor vehicle. Do not
operate it on public roads.
SP05A
Introduction

Safety .............................................................. Page 1-1
Safe Operating Practices ...............................Page 1-2
Disposal .......................................................... Page 2-1
Recycle and Waste Disposal ......................... Page 2-2
Product Overview .......................................... Page 3-1
Specifications .................................................Page 3-2
Names of Each Section ................................. Page 3-3
Safety Signs and Instruction Signs ................ Page 3-5
Handling Instructions .................................... Page 4-1
Inspection Before Use ................................... Page 4-2
Tightening torques ....................................... Page 4-11
Adjustment Before Operating ...................... Page 4-14
Procedure to Start / Stop Engine ................. Page 4-19
Operation of Each Section ...........................Page 4-20
Instruments .................................................. Page 4-27
Travel of Machine ........................................ Page 4-27
Operations ................................................... Page 4-28
Transporting .................................................Page 4-35
Maintenance ................................................... Page 5-1
Maintenance Precautions .............................. Page 5-2
Maintenance Schedule .................................. Page 5-3
Jacking up the machine ................................. Page 5-5
Greasing ........................................................ Page 5-6
Maintenance (Attachments) ...........................Page 5-9
Maintenance (Main Body) ............................Page 5-11
Long-Term Storage ......................................Page 5-20
SP05A
Contents