BATHROOMS.COM SALISBURY WC UNIT User manual

SALISBURY WC UNIT
Installation Manual
Please keep safe for future reference

2
TOOLS REQUIRED
PENCIL DRILLBIT SILICONE & GUN
FLAT & CROSS HEAD
SCREWDRIVERS
TAPE MEASURE ELECTRIC DRILL
PARTS LIST
AX2
FOOT PADS

3
GENERAL INFORMATION
IMPORTANT - Please read before installation
Check the pack and make sure all the components are included. When you are ready to
start make sure you have the right tools to hand, plenty of space and a clean dry area
for building. Don’t rush, read the instructions first and run through them before you
begin.
Keep fittings together to avoid loss. Do not over tighten screws or bolts.
CLEANING Use mild soap and water only, Do not use washing powders or any other
types of abrasive cleaners. See aftercare instructions.
IMPORTANT
If you are at all unsure of any part of the instructions shown in this document we
recommend that you contact a reputable qualified trades person.
If a part is missing or damaged please call 01535 613 830. Please have your
instructions guide ready.
PRODUCT AFTERCARE
We recommend cleaning with a soft damp cloth and mild soap solution.
Do not use cream cleaners or cleaners containing bleach.
Do not scrub or scour.
Do not use abrasive cleaning agents.
Do not use solvent based cleaners.
If a polish is to be used, use a wax free polish.
Do not allow pools of water to remain standing on the surfaces.

4
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Step 1
Remove the front from the unit to make
fitting to the wall easier.
Step 2
Drill the handle positions in the marked
location.
For WC follow manufacturers guide for
cutting templates, sealing any cut edges
with a good quality sealant to prevent
water ingress.
Please ensure you test and configure your
chosen cistern before securing the top
panel and front top panel.

5
INSTALLATION INSTRUCTIONS
Step 3
Peel the back off the foot pads and stick in
place.
Step 4
Note It is good practice to fit
all pipework and plumbing
before fixing the unit to the
wall to enable easier installa-
tion and fitting.
Place the unit in the required
location and mark out the
positions for drilling.
Using a suitable size drill bit,
drill out the positions and
insert wall plugs (not
supplied).
Attach unit to the wall using
suitable wall fixings (not
supplied).

INSTALLATION INSTRUCTIONS
6
INSTALLATION INSTRUCTIONS
Step 5
Reattach the front to the unit, line up the
spring clips and push into place.

Thank you!
Thank you for buying this product from
bathrooms.com.
We hope you are fully satisfied with the
product and service we provide.
If you need any further help or advice with
your purchase, then please feel free to call
our customer service team on the number
below or alternatively you can email us at
[email protected]
Instructions No. 01
Salisbury WC Unit
Date: 04.04.2016
Email: [email protected]
Customer Service: 0845 833 4441
Technical Support: 01525 300 751
www.bathrooms.com