Baumer Strbrkbmrbf47 User manual

Floor Standing 47-Piece Parts Bin

Rack

User Guide

Safety

•This unit is not a toy and should be kept out of the reach of children.

•Small parts are included that may pose a choking hazard to children and animals. Keep parts away from children

and pets.

•Before assembly, ensure there are no missing or defective parts. Contact the retailer if any parts are missing or

defective.

•Assemble only as instructed in this guide. Any deviation or shortcut may lead to incorrect assembly or be

considered customer misuse. Improper assembly may cause damage or serious injury.

•Do not mount the unit to a vehicle.

•Do not over-tighten mounting screws or parts during assembly as this may damage the unit.

WARNING

•The unit should only be positioned on a flat, level and stable surface.

•Do not exceed the maximum load capacity as this may result in damage or serious injury. Load capacity:

Small bins = 1.5kg (each)

Large bins = 2.3kg (each)

Overall capacity = 82.5kg

•For stability, heavier items should always be placed in the lower bins.

•Do not rest or support items against or on the unit.

CAUTION

•To ensure continued safety, regularly check that the unit is secure and safe to use (every 3 months). Take

appropriate action to rectify any unstable or unsafe units.

•If you do not understand this guide, or have any doubts regarding safety of the assembly, seek advice and

guidance from a qualified person.

•Appropriate protective equipment, such as safety glasses, must be worn and precautions taken when installing this

product.

•It is recommend that two persons install the unit.

•Before installation, ensure the supporting surface will safely support the combined weight of the unit and all stored

items. If unsure, contact a qualified contractor for guidance.

Cleaning and Care

Clean the unit using a damp cloth. Avoid using harsh or abrasive chemicals as this can damage surface finishes.

Included Items

1. Base x1

2. Base Support Bracket x2

3. Frame Leg x2

4. Bin Support Rail x7

5. Vertical Support Rail x3

6. Top Tray x1

7. Large Machine Screw x20

8. Hex Nut x8

9. Small Machine Screw x21

10. Small Bin x28

11. Large Bin x15

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Disposal

Warranty

Please recycle where facilities exist. Check with your local authority for recycling advice.

Retain your purchase receipt or statement as proof of purchase and date.

The warranty applies only if the product is assembled and used solely in the manner indicated in this guide, and all other instructions have

been followed accurately. Any abuse of the product, incorrect assembly or the manner in which it is used will void any warranty.

No rights are given under this warranty to a person acquiring the product second-hand or when used for commercial use.

Assembly

1. Place the top tray (6) upside-down on a flat surface.

2. Position the frame legs (3) on the inside of the top

tray. Note: The bin support rail mounting holes on the

frame legs should face inwards, and the base support

bracket holes should be opposite the top tray and facing

outwards.

3. Fasten the frame legs to the top tray on both sides

using 8 large machine screws (7) and nuts (8).

4. Place the base (1) on the opposite end of the frame

legs. Ensure that the base support bracket holes are

facing the front of the unit.

5. Fasten the frame legs to the base on both sides using

8 large machine screws (7) and nuts (8). Turn the unit

over so it is standing on the base.

6. Attach a bin support rail (4) to the frame legs at the

position nearest the base. Ensure that the fastening

holes in the support rail are closer the top of the unit. To

attach the rail, insert the pins on the sides of the rail into

the larger diameter part of the rail mounting holes in the

frame legs, then slide the rail downward so the pins sit in

the slotted part of the rail mounting holes.

7. Place the base support brackets (2) on to the base

and fasten them to the base and frame legs using 4 large

machine screws (7).

8. Attach the remaining bin support rails (4) to the frame

legs as described in step 6.

9. Place the flat part of the vertical support rails (5)

against the backs of the bin support rails and fasten them

together using 21 small machine screws (9).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any product may

cause seriousinjury or death. To help reduce your risk of seriousinjury or death, refer

to the information below. For more information, see www.datastreamserver.com/safety

Consult all documentation, packaging and product

labelling before use. Note that some products feature

documentation available online. It is recommended to

print and retain the documentation.

Before each use, check the product for loose/broken/

damaged/missing parts, wear or leaks (if applicable).

Never use a product with

loose/broken/damaged/missing parts, wear or leaks.

Products must be inspected and serviced (if

applicable) by a qualified technician every 6 months.

This is based on average residential use by persons of

average size and strength, and on a property of

average metropolitan size. Use beyond these

recommendations may require more frequent

inspections/servicing.

Ensure that all users of the product have completed a

suitable industry recognised training course before

being allowed access to the product.

If this product has been purchased in error when

considering the information presented here, contact

the retailer directly for details of their returns policy, if

required.

The product has been supplied by a general

merchandise retailer that may not be familiar with your

specific application or description of application. Be

sure to attain third-party approval from a qualified

specialist for your application before use, regardless of

any assurances from the retailer or its representatives.

This product is not intended for use where fail-safe

operation is required. As with any product (for

example, automobile, computer, toaster), there is the

possibility of technical issues that may require the

repair or replacement of parts, or the product itself. If

the possibility of such failure and the associated time it

may take to rectify could in any way inconvenience the

user, business or employee, or financially affect the

user, business or employee, then the product is not

suitable for your requirements. This product is not

intended for use where incorrect operation or a failure

of any kind, including but not limited to, a condition

requiring product return, replacement, parts

replacement or service by a technician may cause

financial loss, loss of employee time or an

inconvenience requiring compensation.

ideas, diagrams or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Table of contents

Popular Rack & Stand manuals by other brands

Dynex

Dynex DX-MP3MT Quick setup guide

Konig & Meyer

Konig & Meyer 24185 manual

ECG

ECG LD 326501 instruction manual

Philips

Philips SB7S19S/00 quick start guide

Woodline

Woodline KIT-250 lb instructions

ricoo

ricoo S1222 installation instructions

Kanto

Kanto P301 user manual

VidaBox

VidaBox VB MNT FFS2 installation guide

PROEL

PROEL PLWIN60C user manual

AllMounts

AllMounts PLB-43S instruction manual

VMP

VMP VH-001 instruction sheet

Nederman

Nederman SYSTEM 920/400 instruction manual

Glasdon

Glasdon ORBIS POST MOUNTING KIT installation guide

Songmics

Songmics LGR105 manual

Grape

Grape GM401 user manual

FourStarGroup

FourStarGroup 11225296 manual

CHIEF

CHIEF FLR100 installation instructions

FEC

FEC XDCAM EX PMW-EX30 manual

Baumer STRBRKBMRBF47 User manual

Popular Rack & Stand manuals by other brands