Bay Supply 1452 User manual

1452
MODEL: PRODUCT TYPE:
Page 1
WARNING
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
PRODUCT INFORMATION:
SPECIFICATIONS:
WARNING
MADE IN CHINA
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing,
operating, servicing or repairing this tool. Keep these instructions
in a safe accessible place.
INTENDED USE OF THE TOOL
1 YEAR LIMITED WARRANTY
Before Use
When unpacking, check the parts diagram and part number
listing on page 4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
s.ORMALUSEOFTHISPRODUCTISLIKELYTOEXPOSETHEUSERTO
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear appropriate
safety equipment and clothing when using this product.
Study, understand and follow all instructions provided with
this product. Failure to read and follow all warnings and
operating instructions may result in damages and serious
injury or death.
sAlways wear ANSI approved goggles when using this
product. (Users and By standers).
s.EVERUSETHISTOOLFORANYAPPLICATIONOTHERTHANFORWHICH
it was designed.
s/NLYUSEACCESSORIESDESIGNEDFORTHISTOOL
s.EVERALTERORMODIFYTHISTOOLINANYWAY
s)MPROPEROPERATIONANDORMAINTENANCEOFTHETOOL
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
s!LWAYSSELECTTHECORRECTACCESSORIESOFTHECORRECTSIZE
and design for the job that you are attempting to perform.
s!LWAYSWORKINACLEANSAFEWELLLITORGANIZEDAND
adequately equipped area.
s$ONOTBEGINREPAIRSWITHOUTASSURANCETHATVEHICLEISIN
secure position, and will not move during repair.
DO NOT DISCARD – GIVE TO USER
s8,MODELMAKESSETTINGEVENEXTRALARGERIVETNUTSLIKE
1/2" and M12 a breeze
sINTERCHANGEABLEMANDRELNOSEPIECESETSIN-ETRICAND
3!%SIZES---AND
s4OOLLESS1UICK#HANGE(EADDESIGNALLOWSFOREASY
CHANGINGOFMANDRELSANDNOSEPIECESBYHAND
s$ISASSEMBLYOFTOOLNEVERREQUIREDUNIQUESPRINGLOADED
INNERHEXSLEEVEAUTOMATICALLYLOCKSTHEROTATIONOFHAND
INSTALLEDMANDRELS
s)NCLUDESPCRIVETNUTSOFEACHINCLUDEDSIZE
s8,HANDLESANDHINGESYSTEMMULTIPLYINPUTFORCE
MORETHANANYOTHERMODEL
Length: MM
7EIGHTLBSG
7ORKING3TROKEMM
4OOLMATERIAL3TEELALUMINUM
XL NUT/THREAD SETTING HAND
RIVETER KIT 1/2" CAPACITY
XL NUT/THREAD SETTING HAND
RIVETER KIT 1/2" CAPACITY
4HISTOOLISINTENDEDTOBEUSEDTOINSTALLMETRIC---
and 3!%ANDRIVETNUTS Do not use this
TOOLOUTSIDEOFTHEDESIGNEDINTENT.EVERMODIFYTHETOOLFORANY
other purpose or use.
$VWUR3QHXPDWLF7RRO&RZDUUDQWVRXUSURGXFWVWRWKHRULJLQDOXVHUDJDLQVWGHIHFWLYH
PDWHULDORUZRUNPDQVKLSIRUDSHULRGRI\HDUH FHSWZKHUHQRWHGRQRXUSULFH
VFKHGXOHIURPWKHGDWHRIVWXVH$VWURUHVHUYHVWKHULJKWWRGHWHUPLQHZKHWKHUWKH
SURGXFWIDLOHGEHFDXVHRIGHIHFWLYHPDWHULDOZRUNPDQVKLSRURWKHUFDXVHVDQGWRFKDUJH
EDFNIRUPLVVLQJSDUWV$VWUR3QHXPDWLF7RRO&RDWLWVGLVFUHWLRQZLOOUHSDLUSURGXFWV
FRYHUHGXQGHUWKLVZDUUDQW\IUHHRIFKDUJH7KHGLVWULEXWRUVKRXOGGLUHFWWKHRULJLQDOXVHU
WRUHWXUQWKHSURGXFWZLWKWKHH FHSWLRQVOLVWHGEHORZZLWKWKHGLVWULEXWRU¶VQDPH
DGGUHVVDGHTXDWHSURRIRIGDWHRISXUFKDVHRUDFRS\RIZDUUDQW\FDUGDQGDVKRUWQRWH
H SODLQLQJWKHSUREOHPFailures caused by accident, alteration, or misuse are not
covered by this warranty.






$VWUR3QHXPDWLF7RRO&RRULWVDXWKRUL]HGVHUYLFHUHSUHVHQWDWLYHVPXVWSHUIRUPDOO
ZDUUDQW\UHSDLUV$Q\UHSDLUWRWKHSURGXFWE\XQDXWKRUL]HGVHUYLFHUHSUHVHQWDWLYHV
YRLGVWKLVZDUUDQW\7KHULJKWVXQGHUWKLVZDUUDQW\DUHOLPLWHGWRWKHRULJLQDOXVHUDQGPD\
QRWEHWUDQVIHUUHGWRVXEVHTXHQWRZQHUV

7KLVZDUUDQW\LVLQOLHXRIDOORWKHUZDUUDQWLHVH SUHVVHGRULPSOLHGLQFOXGLQJZDUUDQWLHV
RIPHUFKDQWDELOLW\DQGILWQHVVIRUDSDUWLFXODUSXUSRVH6RPHVWDWHVGRQRWDOORZWKH
H FOXVLRQRIOLPLWDWLRQVRILQFLGHQWDORUFRQVHTXHQWLDOGDPDJHVVRWKH
DERYHOLPLWDWLRQVPD\QRWDSSO\WR\RX

1452
MODEL: PRODUCT TYPE:
Page 2
WARNING
Always wear ANSI approved safety goggles when using this
PRODUCT5SERSAND"YSTANDERS&AILURETOREADANDFOLLOWALL
WARNINGSANDOPERATINGINSTRUCTIONSMAYRESULTINDAMAGESAND
serious injuries or death.
2EMOVEANDINSTALLTHEMANDRELANDnosepieces in pairs only.
!LWAYSKEEPTHEMATCHEDMANDRELNOSEPIECESETSTOGETHER
2EMOVENOSEPIECEFROM21 sleeve by unthreading the nose
PIECECOUNTERCLOCKWISE4HISCANBEDONEEITHERBYHANDOR
with the provided wrench if too tight to do so.
&ULLYEXTENDTHEARMSOFTHETOOLSOTHATTHEHEXSLEEVEIS
EXPOSED5SINGYOURTHUMBNAILORTOOLPRESSDOWNTO
DEPRESSTHE14 inner SLIDINGHEXAGONALsleeve that sits
WITHINTHE21 outer sleeve. This should reveal THELOWERHEX
PORTIONOFTHEMANDREL
5NTHREADTHEMANDRELBYHANDTOREMOVEITFROMTHESLEEVE
/NCETHEMANDRELHASBEENTHREADEDOUTFARENOUGHTOCLEAR
THE14HEXSLEEVEYOUMAYRELEASETENSIONONTHISSLEEVE
collar.
#HOOSETHECORRECTMANDRELNOSEPIECETOBEINSTALLED
4HREADTHENEWMANDRELINTOTHETOOLBYHANDUNTILIT
APPROACHESTHE14HEXSLEEVEANDFULLYDEPRESSTHISSLEEVE
TOALLOWTHEMANDRELTOBETHREADEDFURTHERUNTILITSTOPS
The mandrel does not need to be torqued. Release the
HEXSLEEVEANDALLOWITTOFULLYREENGAGETHEMANDREL)FTHE
MANDRELANDHEXSLEEVEDONOTINITIALLYALIGNROTATETHE8
KNOBWHILEHOLDINGONTOTHEMANDRELUNTILITCLICKSUPAND
reengages.
4HREADTHEMATCHINGNOSEPIECEINTOTHE21 outer sleeve by
HAND4ORQUEINGTHENOSEPIECEISOPTIONAL
OPERATING INSTRUCTIONS:
CHANGING MANDREL/
NOSEPIECE INSTRUCTIONS:
XL NUT/THREAD SETTING HAND
RIVETER KIT 1/2" CAPACITY
3IZE
-
-
M12
1/2"
$RILL(OLE
MMOR
MMOR
MMOR
MMOR
Assembly direction
1. Choose the rivet nut size to be installed.
)NSTALLTHECORRECTSIZEMANDRELNOSEPIECEFORTHERIVETNUTTO
be installed. See photos and instructions for changing the
MANDRELNOSEPIECEANDADJUSTMENT
$RILLAHOLEINTHEWORKPRODUCTTHESAMESIZEORSLIGHTLYLARGER
THANTHEOUTSIDEDIAMETEROFTHERIVETNUTTOBEINSTALLED
See below chart for reference:
4. To install the rivet nut, open the handles outward as far as
POSSIBLEANDTHREADTHERIVETNUTCLOCKWISEONTOTHEMANDREL
WHILEHOLDINGTHE+NOB until reaching the nosepiece.
)NSERTTHERIVETNUTFASTENEDTOTHERIVETERINTOTHEPREDRILLED
HOLEUNTILFLUSHWITHTHEWORKPRODUCTANDPULLHANDLESINWARD
to secure the rivet nut into the hole. If the rivet nut is loose in
the hole, open the handles outward, turn 8KNOBCLOCKWISE
and pull handles inward until the rivet nut is secure in the
hole. Repeat as necessary until the rivet nut is secure in the
HOLE3EEADJUSTMENTINSTRUCTIONSIFNECESSARY
4URNTHE8KNOB COUNTERCLOCKWISEUNTILTHEMANDRELIS
REMOVEDFROMTHERIVETNUT4HERIVETNUTINSTALLATIONIS
COMPLETEIFTHERIVETNUTISSECUREFROMMOVEMENTINTHEHOLE

0ROPERADJUSTMENTOFTHERIVETERISNECESSARYFOREFFICIENT
and easy operation.
4HEADJUSTMENTOFTHERIVETERWILLVARYDEPENDINGONTHE
size and type of rivet nut being used and the hole size.
!DJUSTTHERIVETERBYOPENINGTHEHANDLESOUTWARDASFARAS
possible ANDTURNTHEOUTERSLEEVECOUNTERCLOCKWISE
until the desired nose length is achieved. Nose length can
be adjusted based on the length of the rivet nut being used
ORTOENGAGELESSORMOREOFTHETHREADSDURINGSETTING
&INEADJUSTMENTCANBEMADEBYTURNINGTHERIVETNUTONTHE
MANDRELTOPOSITIONTHERIVETNUTCLOSERORFURTHERAWAYFROM
THENOSEPIECEASLONGASTHEMANDRELISTHREADED at least
OFTHEWAYTHROUGHTHERIVETNUT
4. !LWAYSENSURETHATTHEMANDRELISTHREADEDTHROUGHENOUGH
OFTHERIVETNUTTOPREVENTDAMAGETOTHETHREADS
)FTHEHANDLESAREEXTENDEDTOOFAROUTWARDTOPROVIDE
enough leverage to set the rivet nut, turn THE21 outer
sleeveCLOCKWISEORTURNTHERIVETNUTCOUNTERCLOCKWISE
slightly to change the handle angle and provide the proper
leverage.
1452
MODEL: PRODUCT TYPE:
0AGE
ADJUSTMENT INSTRUCTIONS:
Riveter properly prepared for setting rivet nuts.
4HEARMSDONOTNEEDTOBEEXTENDED
Store matching nosepieces and mandrels
together when not in use to prevent mismatching
THESIZESANDFORCONVENIENCE
M10
M10
M10
M8
XL NUT/THREAD SETTING HAND
RIVETER KIT 1/2" CAPACITY
M10
M8
/PENHANDLES
and thread
rivet nut
onto mandrel
Turn knob
counterclockwise
after rivet nut
setting is
complete to
remove riveter
from the set rivet nut

1452
Page 4
MODEL: PRODUCT TYPE:
PARTS BREAKDOWN


















1
2

4
5


8

10
11
12

14
15


Grip
!RM
Screw
Connecting Rod
Bushing
Spacer
,OCKNUT
Knob
Short Casing Joint
Ontology Cap
Knob Screw
Activity Set
Spring
(EX Sliding Sleeve
Pull Rod
M8 Mandrel
M8 Nosepiece
2
2
2
4
4
2
2
1
1
1
1
1
1
1
1
1
1
Index Part No. Description Qty
















18

20
21
22

24
25


28





Spacer
Bushing
Spring Pin
Outer Sleeve
!LUMINIUM!LLOY"ODY
Spacer
M12 Mandrel
M12 Nosepiece
M10 Mandrel
M10 Nosepiece
-ANDREL
.OSEPIECE
-ANDREL
.OSEPIECE
-ANDREL
.OSEPIECE

1
1
1
1
4
1
1
1
1
1
1
1
1
1
1
Index Part No. Description Qty
Parts List
XL NUT/THREAD SETTING HAND
RIVETER KIT 1/2" CAPACITY
M12
M12
5/16
5/16
3/8
3/8
1/2
1/2
M10
M10