Bayside CSC65FP-30BI-2 User manual

Date 2017-07-19 Rev. 0001-B Factory: BESBEA
Fireplace Media Console
ITM. / ART. 1049034
Model # CSC65FP-30BI-2
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In U.S., Canada, and Mexico only)
Or visit our website www.baysidefurnishings.com
Or e-mail your request to [e-mail]

2
1. This product is for indoor domestic use only.
2. Please read the Assembly Instructions prior to assembling this product.
3. To avoid damage, assemble the product on a non-abrasive surface such as a carpet surface.
4. Refer to your assembly manual for maximum weight capacities. Load drawers and shelves from the
bottom to the top. Place heavier items in lower drawers and/or shelves. Unload drawers and shelves from
the top to the bottom before moving the furniture.
5. Do not push furniture, especially on carpeted floor. Have someone help you lift the item and place it in its
new location. Remove any glass tops or shelves before moving.
MANUFACTURER: Bayside Furnishings
®
CATALOGUE: Fireplace Media Console (CSC65FP-30BI-2)
MADE IN CHINA
MAXIMUM LOAD 22.7 kg / 50 lb
MAXIMUM RECOMMENDED WEIGHT LOADS
Please make sure you have all parts before beginning assembly. Please wait until all steps are completed
before tightening bolts. We recommend using two people for assembly.
GENERAL INFORMATION AND TIPS
FITS MOST 190.5 cm / 75 in
FLAT PANEL TVs
MAXIMUM LOAD 61.3 kg / 135 lb
MAXIMUM LOAD 4.5 kg / 10 lb
PLACE TV BEHIND THE STOPPER
THIS UNIT IS NOT INTENDED FOR USE WITH CRT TVS. USE ONLY WITH FLAT
PANEL TVS AND AUDIO/VIDEO EQUIPMENT MEETING RECOMMENDED SIZE AND WEIGHT
LIMITS. NEVER USE WITH LARGER/HEAVIER THAN RECOMMENDED FLAT PANEL TVS OR
EQUIPMENT. TO AVOID INSTABILITY, PLACE FLAT PANEL TV IN THE CENTER OF THE UNIT; THE
BASE OF THE TELEVISION MUST BE ABLE TO REST ON THE SUPPORTING SURFACE OF THE
UNIT WITHOUT OVER-HANGING THE EDGES. IMPROPERLY POSITIONED FLAT PANEL TVS, OR
FLAT PANEL TVS INCLUDING OTHER EQUIPMENT THAT EXCEED RECOMMENDED SIZE AND
WEIGHT LIMITS COULD FALL OFF OR BREAK THE UNIT, CAUSING POSSIBLE SERIOUS INJURY.

3
Parts and Hardware List
PART # PART DESCRIPTION PART FIGURE QUANTITY
A Mantel Base with Fireplace 1
B Adjustable Shelf
(Pre-attached)
2
C Remote Control with two
AAA Batteries
1
AA Acrylic Stopper 1
Rubber Liner 1.5 m
Hex Wrench 1
Touch-up Pen 1
Tipping Restraint Hardware Kit
2 sets
NOTE: 1 set rubber liner is prepared to refasten the metal trims if needed.
Additional tools required (not included): Phillips screwdriver, power drill,
and 3 mm / 0.1 in drill bit.

4
Assembly Instructions
1. The adjustable shelves (B) are pre-installed for shipping. If the shelf position is not to your liking, adjust
them to your desired location.
2. The upper rear panel is removable for easy access to audio and video component hook-up.
B
B
B
B
A

5
Assembly Instructions
NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat
panel television directly on the console.
3. Remove the paper backing from the acrylic stopper (AA). Align the acrylic stopper into the cut-out on the
acrylic stopper template. Press down on the acrylic stopper (AA) to help adhesion.
4. At the back of the top panel, carefully unscrew two thumb tacks to remove the acrylic stopper template.
5. All the door decorative metal trims are designed to be removable.
6. You can keep the doors as they are or remove the metal trims to get clear glass door panels.
A

6
Assembly Instructions
7. Ask for assistance to position the console (A) at the desired location against a wall and adjust
the pre-attached floor levelers to correct tilting and/or level the doors as shown.
8. Attach the console to the wall use the anti-tip hardware.
NOTE: The tipping restraint hardware included is for wooden stud wall construction. It must be attached
to a wall stud. Depending upon your wall construction, different anchor hardware maybe required.
Please contact your local hardware store for assistance. Young children can be seriously injured by
tipping furniture. You must install the Tipping Restraint Hardware with the unit to prevent the unit from
tipping, causing any accidents or damage. The tipping restraints are intended only as a deterrent, they
are not a substitute for proper adult supervision. The tipping restraints are not earthquake restraints. If
you wish to add the extra security of earthquake restraints, they must be purchased and installed
separately.
9. Connect the fireplace to a power transformer. Follow the operating manual of electric fireplace to control
your fireplace.
CAUTIONS: BATTERY INSTRUCTIONS
•Always purchase the correct size and grade of battery most suitable for the intended use.
•Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
•Clean the battery contacts and also those of the device prior to battery installation.
•Ensure the batteries are installed correctly with regard to polarity (+ and -).
•Remove batteries from equipment which is not to be used for an extended period of time.
•Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory
for local recycling centers and / or follow local government regulations.

7
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can
cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as
sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips
will enhance your furniture as it ages.
Cleaning Trim for Fireplace
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean soft
cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based
products can be obtained at supermarkets or hardware stores.
A touch-up pen has been provided to minimize the small nicks or scratches that may occur during assembly or
shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Bayside Furnishings
®
purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Bayside Furnishings
®
product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state
or province to province.
Customer Service: 1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(In U.S., Canada, and Mexico only)
www.baysidefurnishings.com
MADE IN CHINA / FABRIQUÉ EN CHINE / HECHO EN CHINA