Beacon Athletics TUFFScreen Pitcher's L User manual

BeaconAthletics.com |8 0 0-747- 59 85 |fax [phone]
8233 FORSYTHIA STREET, SUITE 120, MIDDLETON, WI 53562
© Copyright 2015, Beacon Athletics, A division of Rainbow Group, LLC. All Rights reserved. This material may not be republished,
rewritten or redistributed including electronically cached without the prior written consent of Beacon Athletics.
Version 1 rev_2015-03
COVER PADDING WITH VINYL COVER
To cover the padding you will need to use shears.
b Layout Vinyl Cover and secure with 8" cable ties.
b Tuck in as needed on corners.
b Trim cable tie ends ush with capture end.
b Trim excess vinyl.
ASSEMBLY GUIDE
Pitcher’s L
8x 8 Fungo

Congratulations on the purchase of your professional grade TUFFScreen™
ineld screen. Some basic assembly is required. Assembly of the frame and wheel
kit will only take a few minutes. Lacing the net to the frame will take approximately
60 minutes. Your satisfaction is our ultimate goal. Contact us online at
beaconathletics.com/contact or call 800-747-5985 if you have questions.
nOrder of Assembly:
1. Assemble frame
2. Attach axle tube & wheel kit
3. Lace net to frame
4. Attach padding to frame
5. Cover padding with vinyl cover
nTools You’ll Need:
1. Two 9/16" Box End Wrenches
2. Shears
3. Tape Measure or Ruler
8x8 FUNGO &PITCHER’S L
Straight Spacer
Pitcher’s L only [2]
QUANTITY listed in [brackets] for each part for the 8x8 Fungo and the Pitcher’s L.
NOT…: Heavy-duty UV-treated #72 knotted nylon net and a vinyl cover roll with cable ties also included.
U-Connector
Pitcher’s L only [2]
45°-Connector
Pitcher’s L only [1]
Elbow Connector
Pitcher’s L [1]
8x8 [4]
Corner Pad
Pitcher’s L [4]
8x8 [3]
Net Twine
Pitcher’s L [1]
8x8 [1]
Straight Connector
8x8 only [4]
Short Pad Pitcher’s L [1]; 8x8 [1]
Long Pad Pitcher’s L [3]; 8x8 [4]
Square Axle Tube
Pitcher’s L [1]
8x8 [1]
Bolt w/Nylock Nut &
Split-lock Washer
(3/8"- 16 x ¾")
Pitcher’s L [4]
8x8 [4]
Bolt w/Nylock Nut
(3/8"- 16 x 3")
Pitcher’s L [1]
8x8 [1]
Bolt w/Nylock Nut
(3/8"- 16 x 2½")
Pitcher’s L [5]
8x8 [7]
Bolt w/Nylock Nut
(1/2"- 13 x 7")
Pitcher’s L [2]
8x8 [2]
“No-Flat” Tire
(9/350-4 4-ply smooth)
Pitcher’s L [2]
8x8 [2]
Wheel Mounting Plate
Pitcher’s L [1]
8x8 [1]
Wheel Bracket
Pitcher’s L [2]
8x8 [2]
Axle Tube Brace
Pitcher’s L [2]
8x8 [2]
BASIC FRAME PARTS
AXLE TUBE & WHEEL KIT PARTS
BASIC HARDWARE
PADDING & NET PARTS
COCOA MOP
TUFFSCREEN™INFIELD SCREENS
TUFFSCREEN™INFIELD SCREENS
@beaconathletics | /beaconathletics1948 | BeaconAthletics.com 3
33
2
BeaconAthletics.com
| 8 0 0-747- 59 85 |
fax [phone]
2
B
C
D E
1
4
2
3
A
F
M
O
N
P
HI
JRound U-Bolt
Pitcher’s L [2]
8x8 [2]
KSquare U-Bolt
Pitcher’s L [2]
8x8 [2]
L
G

FRAME ASSEMBLY
Assemble frame as shown, referencing the parts list on the previous page. You’ll
need two 9/16" box end wrenches to complete frame assembly.
For the Pitcher’s L you will use the Straight Spacer (B), U-Connector (C),
45°-Connector (D), and the Elbow Connector (E) with 2½" Bolts with
Nylock Nut (N) .
Detailed instructions for axle tube and wheel kit assembly (circled) are on the next page.
For the 8 x 8 Fungo you will use the Straight Connector (A) and the Elbow
Connector (E) with the 2½" Bolts with Nylock Nut (N).
Detailed instructions for axle tube and wheel kit assembly (circled) are on the next page.
COCOA MOP
TUFFSCREEN™INFIELD SCREENS
TUFFSCREEN™INFIELD SCREENS
@beaconathletics | /beaconathletics1948 | BeaconAthletics.com 5
55
4
BeaconAthletics.com
| 8 0 0-747- 59 85 |
fax [phone]
4
C
NN
N N
N
N N
N
N N
N
N
C
B
B
D
EE
EE
E
A
A
A A

ATTACH AXLE TUBE
BACK VIEW
SIDE VIEW
ATTACH WHEELS
With your frame assembled and axle tube in place, attach the wheels as shown
below. First, attach the Wheel Bracket (J) to the Tire (H). Position the Wheel
Bracket, then run the 7" Bolt (P) through the Tire and both ends of the Wheel
Bracket and secure with Nylock Nut. With Wheel Bracket attached to the Tire,
insert the Bracket into the Square Axle Tube (F) and secure with 3/4" Bolts (M).
Assembly is the same for both the Pitcher’s L and the 8 x 8 Fungo.
To complete frame assembly, attach the axle tube as shown. Assembly is the
same for both the Pitcher’s L and the 8 x 8 Fungo.
COCOA MOP
TUFFSCREEN™INFIELD SCREENS
TUFFSCREEN™INFIELD SCREENS
@beaconathletics | /beaconathletics1948 | BeaconAthletics.com 7
77
6
BeaconAthletics.com
| 8 0 0-747- 59 85 |
fax [phone]
6
M
M
M M
P
O
M
M
O
G
G
FJ
H
G
G
G
L
L
F
F
I
F
L L
K
K
K

LACE NET TO FRAME
Before you add the padding, you’ll need to lace the net to the frame.
You will need to use shears.
b Temporarily attach the net to the frame using the 14" cable ties.
b Lace net to frame as shown in the 5 steps illustrated below.
b Remove the cable ties.
1Tie twine to frame corner. 2Pull a loop of twine through
the corner net mesh.
3Pass the roll of twine
through the loop.
4Pull the roll of twine to tighten
the lace stitch.
5Pass a new loop of twine through the next
mesh and continue lacing around the frame.
COCOA MOP
TUFFSCREEN™INFIELD SCREENS
TUFFSCREEN™INFIELD SCREENS
@beaconathletics | /beaconathletics1948 | BeaconAthletics.com 9
99
8
BeaconAthletics.com
| 8 0 0-747- 59 85 |
fax [phone]
8

See back page for notes
about adding vinyl pad cover.
ATTACH PADDING TO FRAME
To attach the padding you will need to use shears.
b Attach the corner pads (1) (notch placed at 90° corner of frame).
b Attach the short pad (2) (see bottom right).
b Measure and cut long pads (3) to t (see photo).
COCOA MOP
TUFFSCREEN™INFIELD SCREENS
TUFFSCREEN™INFIELD SCREENS
@beaconathletics | /beaconathletics1948 | BeaconAthletics.com 11
1111
10
BeaconAthletics.com
| 8 0 0-747- 59 85 |
fax [phone]
10
1
1
11
2 23
3
33
3
3
3
1 1
1