Beast Blend B6 HEALTH BLENDER User manual

B6 HEALTH BLENDER USER GUIDE
Blend

THIS BOOK COVERS MODEL: B6
Voltage: 120 VAC
Frequency: 60 Hz
Wattage: Max. 600 W

Meet Beast.
We’ve always known we were supposed to eat our
vegetables.
We’ve always known we were supposed to drink
lots of water.
But didn’t…
So we set out to create a blending system that
would make Mom proud.
Beast fuels your body with real food: no processing,
no additives, no BS.
From energy-boosting morning blends, to perfor-
mance fueling smoothies throughout the day, and
blended desserts in the evening, Beast ts seam-
lessly into your life to make you…
strong inside™

43
Important Safeguards.....................................5-8
What’s Included.................................................9
Before Use......................................................10
B6 Blender Light Indicators.........................11-12
How to Use Your B6 Blender.......................13-16
Vessel Fill Example Chart.................................17
Tips & Tricks....................................................18
Troubleshooting..........................................19-20
Beast Blade Assembly......................................21
Care & Cleaning.........................................22-23
Warranty.....................................................24-25
Contents

5 6
READ ALL INSTRUCTIONS AND IMPORTANT
SAFEGUARDS TO AVOID THE RISK OF SERIOUS
INJURY.
FOR HOUSEHOLD USE ONLY
WHEN USING ELECTRICAL APPLIANCES,
ALWAYS FOLLOW BASIC SAFETY PRECAU-
TIONS, INCLUDING THE FOLLOWING:
• To reduce the risk of electric shock, the BEAST® MINI
BLENDER has a polarized plug (one prong is wider than
the other). This plug will t into a polarized outlet only one
way. If the plug does not t fully into the outlet, reverse the
plug. If it still does not t, contact a qualied electrician to
install the proper outlet. DO NOT modify the plug in any way.
• To protect against the risk of electrical shock, do not put
cord, plug, or base in water or any other liquid.
• Extension cords are not recommended for use with this
product.
• DO NOT abuse the power cord. Never carry the appliance
by the power cord or pull on it to disconnect from the
electrical outlet. Instead, grasp the plug itself and pull to
disconnect.
• DO NOT operate the BEAST® MINI BLENDER with a
damaged cord or plug, or after it has been dropped or
damaged in any manner. The BEAST® MINI BLENDER has
no serviceable parts. Email [email protected]
if you have any questions or concerns.
• DO NOT let the power cord hang over the edge of a counter
or touch hot surfaces, such as the stove top. Do not place
near a hot gas or electric burner.
TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR PERSONAL INJURY AND/OR PROP-
ERTY DAMAGE:
• BLADES ARE SHARP! HANDLE WITH CARE. To avoid
injury, do not handle or touch any blade edge. Use caution
and grasp by the Blade Assembly.
• To protect against electrical shock, do not submerge the
appliance or allow the power cord or Blender Base to
come into contact with water or liquids.
• The BEAST® MINI BLENDER has moving parts. Avoid
contact with moving parts. Keep ngers out of the contain-
er and away from the blades.
• To reduce the risk of injury, NEVER operate the BEAST®
MINI BLENDER without the vessel properly assembled
to the blade housing. DO NOT try to defeat the interlock
mechanism. Ensure that the vessel is properly installed
before operating the appliance.
• Keep hands, hair, clothing, and utensils out of the vessel
while powered on to reduce the risk of severe injury to
persons and damage to the BEAST® MINI BLENDER .
You may use a scraper, or the Beast Vessel Spatula (not
included), but only when the appliance is not running.
• DO NOT operate the BEAST® MINI BLENDER with
a damaged Blade Assembly, if it malfunctions, or has
been dropped or damaged in any manner. The BEAST®
MINI BLENDER Blade Assembly has no serviceable
parts. Return the appliance to BEAST HEALTH, LLC for
examination, replacement, and/or adjustment.
• To reduce the risk of injury, never place the Blade
Assembly on the base without the Blending Vessel prop-
erly attached. Always wait until the motor has stopped
completely before removing the Blending Vessel.
• Remember to TURN THE POWER SWITCH OFF when
the BEAST® MINI BLENDER is not in use, before
assembling or disassembling parts, and before clean-
ing. You will know that it has successfully turned off
when the light goes out. To unplug the BEAST® MINI
BLENDER , grasp the plug and pull from the electrical
outlet. Never pull from the power cord.
•DO NOT remove the Blending Vessel from the Blender
Base while it is operating. Wait until the motor powers
down completely, the blades stop spinning, and the ingre-
dients settle to remove the vessel and then POWER OFF.
• NEVER BLEND HOT INGREDIENTS. Doing so may
cause excessive steam and pressure to build up in the
vessel, resulting in the potential risk of the vessel and
blender base separating and thereby possibly resulting
in personal injury and/or property damage.
• Never operate the unit for longer than one minute. Blade
friction for prolonged periods can cause heat and relat-
ed pressure buildup in a closed vessel, with the danger
of personal injury and/or property damage.
• Ensure the ventilation holes on the rear of the blender
base are kept clean and never obstructed.
• NEVER BLEND CARBONATED INGREDIENTS,
INCLUDING LIQUIDS, OR RISING LEAVENING
IMPORTANT SAFEGUARDS CONTINUE
ON NEXT PAGE
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS

7 8
AGENTS IN THE BEAST® MINI BLENDER . These in-
gredients release or produce air bubbles that can produce
foam and cause contents in the Blending Vessel to expand.
Blending these ingredients may cause excessive pressure
buildup in the container and may cause personal injury to
the user or property damage. Common leavening agents
such as baking powder, baking soda, cream of tartar,
cultured or fermented ingredients, egg whites, egg white
protein powder, salt of hartshorn (ammonium carbonate),
whey protein, sea moss, or yeast should not be blended in
the BEAST® MINI BLENDER .
• NEVER store ingredients in the Blending Vessel with the
Blade Assembly attached, both before and after blending.
Some foods may contain active ingredients or release gas-
es that will expand in the container. If the ingredients are
left in the sealed container, excessive pressure can build up
through natural fermentation or chemical interactions and
pose a risk of personal injury. To safely store ingredients in
the container, rst remove the lid to allow the blend to rest
for a few minutes and allow excess gases to escape. Then
use the Storage Lid to cover and store in the refrigerator,
which will release any built-up gases daily.
• The BEAST® MINI BLENDER should not be used to grind
hard spices or beans, as this may cause damage to the
blades and/or blending vessels.
• This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge, unless
they are closely supervised and instructed concerning use
of the appliance by a person responsible for their safety.
Close supervision is necessary when any appliance is
used by or near children. Children should be supervised to
ensure that they do not play with the appliance.
• Do not use your BEAST® MINI BLENDER under the
inuence of drugs or alcohol.
• NEVER leave the BEAST® MINI BLENDER unattended
while in use or when children or present.
• BEAST® accessories are not intended to be used in the
microwave, which may result in damage to the accessories
or microwave.
• ALWAYS use the BEAST® MINI BLENDER on a dry,
stable, level surface.
• DO NOT use the BEAST® MINI BLENDER within 12
inches of the edge of any work surface or counter.
• DO NOT operate the BEAST® MINI BLENDER on or SAVE THESE INSTRUCTIONS
near any hot surfaces (such as a gas or electric burner
or in a heated oven).
• DO NOT use attachments or accessories (including
canning jars) not recommended or sold by the man-
ufacturer with the BEAST® MINI BLENDER . Use of
these items may result in re, electric shock, or personal
injury. Such misuse may also void the warranty.
• DO NOT overll the Blending Vessel. Fill only to the MAX
line, as ingredients need space to ensure complete and
thorough blending and to avoid damaging the motor.
• DO NOT operate the BEAST® MINI BLENDER with an
empty vessel, as this may cause damage to the motor.
• If the BEAST® MINI BLENDER overheats, a thermal
switch will activate and shut off the motor. To reset,
power off the BEAST® MINI BLENDER and let it cool
down for approximately one hour before using again.
• DO NOT use the BEAST® MINI BLENDER for any-
thing other than its intended use.
• DO NOT use the BEAST® MINI BLENDER outdoors.
• Wash Blending Vessels, the Blade Assembly, and
other accessories on the top rack of the dishwasher
only. DO NOT wash the Blender Base in the dish-
washer.
• DO NOT remove the gasket from the Blade Assembly.
• DO NOT remove the trademark/s, serial numbers, or
bar codes from the BEAST® MINI BLENDER.
• DO NOT use the BEAST® MINI BLENDER with a
voltage or electricity converter.
• DO NOT modify the BEAST® MINI BLENDER in any
way.
• This appliance has important markings on the plug
blade. The attachment plug or entire cordset (if plug
is molded onto cord) is not suitable for replacement.
If damaged, the appliance should be replaced.
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS

9 10
Parts Included With B6:
1. B6 Blender Base
1a. Standby Switch
on Blender Base
1b. Power Switch
on Blender Base
1c. Power Cord
on Blender Base
2. Blade Assembly
3. 638mL Blending Vessel
4. Storage Lid
5. Drinking Lid
6. Blade Cleaning Brush
7. 2 Straws
8. Straw Cap
9. Straw Cleaning Brush
Before using the product for the rst time, disassemble
and wash as follows:
1. Remove the Blade Assembly (2) from the Blending
Vessel (3) by turning the Blade Assembly (2) counter-
clockwise.
CAUTION: Use caution when handling the Blade Assem-
bly, as blades are extremely sharp.
2. Hand wash all parts except the B6 Blender Base (1)
and Power Cord (1c) in warm, soapy water. Use your
Blade Brush (6) to clean around the gasket of the
Blade Assembly (2). Rinse and dry thoroughly.
NOTICE: Do not immerse the B6 Blender Base (1) or
Power cord (1c) in water or other liquids. Do not place
the Blender Base into a dishwasher or extremely hot
water. Do not use abrasive cleaners to clean any part of
the product.
What’s Included Before Use
1a
3
BACK OF UNITFRONT OF UNIT
1
2
Included With
B6+Bundle Only:
1b
1c
4
6
5
12
13
11
10
Parts Included With B6+Bundle Only:
10. 529mL Blending Vessel
11. 415mL Blending Vessel
12. Carry Cap
13. Additional Storage Lid
9
8
7
Max Fill Lines for Blending
415mL Vessel has a
maximum ll volume
of 275mL when used
for blending
638mL Vessel has a
maximum ll volume
of 500mL when used
for blending
529mL Vessel has a
maximum ll volume
of 400mL when used
for blending

11 12
B6 Blender Light Indicators B6 Blender Light Indicators
LED BEHAVIOR MEANING
Light Off Unit Off
Unit On, No Blade and/or
Vessel Connected
Unit On, Ready to Blend
Unit On, Blending In
Progress
Vessel Contents Too Hot
to Safely Blend
Amber - Solid
White - Solid
Green - Solid
Red - Solid

13 14
1. Plug the B6 Blender Base into a standard 120-volt AC
electrical outlet.
2. Press the power switch at rear of Blender Base to turn
ON power to the Blender Base.
3. Fill the Blending Vessel with food contents. Chop any
large ingredients into small pieces to help prevent over-
loading the motor. Your Blending Vessel should contain
at least ¹/³liquid for best results.
4. Attach the Blade Assembly to the Blending Vessel
by turning the Blade Assembly clockwise until rmly
secured to the Blending Vessel.
5. Mount the Blending Vessel with Blade Assembly onto
the Blender Base by twisting clockwise until the Blade
Assembly clicks into place.
6. Press the Standby Switch for >1 second to begin
1-minute timed blend cycle.
7. Press the Standby Button for <1 second to pulse the
blades. Repeat until desired consistency is achieved.
8. Unmount the Blending Vessel with Blade Assembly from
the Blender Base by twisting counter-clockwise.
The 1-minute timed blend cycle is intelligently programmed
to efciently blend your ingredients. It works as follows:
1. Blends for 20 seconds
2. Briey slows down to allow ingredients to settle
3. Continues blending for 25 seconds
4. Briey slows down to allow the ingredients to settle
5. Continues blending for 15 seconds
6. Stops after 1 full minute
CONTINUED ON NEXT PAGEINSTRUCTIONS CONTINUE ON NEXT PAGE
How to Use Your B6 Blender
MAX
1 2
3 4
5 6
7 8
<1
SEC
PULSE
<1
SEC
1+
SEC
BLEND
1
MIN

15 16
9. Remove the Blade Assembly from the Blending Vessel
by turning the Blade Assembly counter-clockwise until
the Blade Assembly can be removed.
10. Press the Power Switch at rear of Blender Base to
turn OFF power to the unit.
11. Drink blend directly from the Blending Vessel, add the
Vessel Drinking Lid and Carry Cap to take your blend
on-the-go, or use the Storage Lid to blend for later in
the refrigerator.
To clean all parts after each use, follow the below steps.
12. After each use, rinse your Blade Assembly under hot
water. Use the Blade Cleaning Brush (included) to
remove particles of food in and around the blade area,
as well as in the cavity thread area above the gasket
and clean with soap and water. If preferred, after each
use, place Blade Assembly on the top rack of the
dishwasher only. Allow Blade Assembly to completely
dry before re-assembling your Beast Blender.
13. Rinse the Blending Vessels and clean with a kitchen
dish brush, or the Beast Cleaning Brush (not included).
If preferred, place Blending Vessels and Drinking Lids
+ Carry Caps on the top rack of the dishwasher only.
14. Clean Blender Base periodically with a damp towel
or sponge.
How to Use Your B6 Blender 9 10
12
11
13
14
OR OR

17 18
Shake Method to Loosen Stuck Ingredients
When blending tough foods, large ingredients, or with a
limited amount of liquid in the vessel, the contents of the
Blending Vessel may become stuck and require a manual
method of freeing up the contents in order to continue
blending.
1. Remove the Blade Assembly with Blending Vessel
from the Blender Base.
2. With the Blade Assembly and Blending Vessel in
hand, shake it up and down thoroughly.
3. Reattach to the Blender Base to nish blending.
Coarsely Chop Ingredients by Pulsing
Pulsing is a useful way to coarsely chop ingredients
without totally emulsifying them. This method is particularly
useful for grinding coffee beans, making chunky salsa,
chopping onions, and adding chunks of ingredients to an
already smooth mixture for texture.
To Pulse:
1. Press the Standby Switch on the front of the unit for
less than 1 second.
2. Repeat until you achieve your desired texture.
Vessel Fill Example Chart Tips & Tricks
The below chart provides examples of ingredient types,
amounts, and time required to blend/grind in each vessel.
TYPE
LOAD ATTACHMENT CAPACITY BLEND CYCLE
BLENDING Carrots
+ Water
638mL
Blending Vessel
(500mL Max
Fill) with Blade
Assembly
200g
Carrots
300g Water
60s
GRINDING
Wheat,
Rice,
Corn
638mL
Blending Vessel
(500mL Max
Fill) with Blade
Assembly
350g 60s
BLENDING Carrots
+ Water
415mL
Blending Vessel
(275mL Max
Fill) with Blade
Assembly
100g
Carrots
150g Water
60s
Max Fill Lines for Blending
415mL Vessel has a
maximum ll volume
of 275mL when used
for blending
638mL Vessel has a
maximum ll volume
of 500mL when used
for blending
529mL Vessel has a
maximum ll volume
of 400mL when used
for blending
PLEASE NOTE: if your Blending Vessel is overlled and the Blade
Assembly is not screwed on tightly at the beginning of the blending
cycle, your blend ingredients could spill into the threading and cause
your Blending Vessel to get stuck to the Blade Assembly. This is why it
is very important to follow the Max Fill Lines For Blending. However, if
this does happen, refer to our FAQs for tips at www.thebeast.com.

19 20
Please refer to the “B6 LED Light Behavior” section on
page 11.
• If the LED light indicator displays:
No Visible Light
That Means: Your blender unit is not powered on.
Try: Make sure that the Blender Base is plugged into a
functioning standard 120-volt AC electrical outlet. Then
power ON the unit by pressing the Power Switch at the
back of the unit.
• If the LED light indicator displays:
Solid Amber Color Light
That Means: Your blender unit is powered on, but the Blade
Assembly and/or Blending Vessel is not properly connected.
Try: Conrm that the Blade Assembly is rmly threaded
onto the Blending Vessel. Then conrm that the Blade As-
sembly and Blending Vessel are twisted onto the base until
it clicks into place and the LED indicator displays a Solid
White color light.
• If the LED light indicator displays:
Solid Green Color Light and
does not blend
That Means: The motor is overloaded.
Try: Power OFF the unit by pressing the Power Switch on
the back of the unit. Wait 30 seconds for the unit to reset.
Then:
1. If the contents of the Blending Vessel appear to be
stuck in place, perform the “Shake Method” listed in the
“Tips & Tricks” section to free up the ingredients before
continuing blending.
2. If the Blending Vessel is lled beyond the Max Fill line,
remove the Blade Assembly from the Blending Vessel.
Remove enough contents to bring the ll level down to or
below the Max Fill line. Then go to step 4 of the “How to
Use Your B6 Blender” section to continue blending.
3. If the LED light indicator continues to display a Green light,
but does not blend, the motor itself may be overheated and
will require time to cool down. Power OFF the unit, and
allow to cool for one hour before attempting to blend again.
• If the LED light indicator displays:
Flashing Red Color Light
That Means: The contents of the Blending Vessel are too
hot to safely blend.
Try:
1. Power OFF the unit by pressing the Power Switch on the
back of the unit. Wait for 30 seconds for the unit to reset
before powering back on.
2. Make sure that the contents of the Blending Vessel are at
or below room temperature before continuing to blend.
• If your Beast Blender motor sounds like it is laboring
and blending is not efcient that means: Your Blending
Vessel may be overlled, or Blending Vessel contents
may be stuck.
Try:
1. If the contents of the Blending Vessel appear to be stuck
in place, perform the “Shake Method” listed in the “Tips &
Tricks” section to free up the ingredients before continu-
ing blending.
2. If the Blending Vessel is lled beyond the Max Fill line,
remove the Blade Assembly from the Blending Vessel.
Remove enough contents to bring the ll level down to or
below the Max Fill line. Then go to step 4 of the “How to
Use Your B6 Blender” section to continue blending.
Troubleshooting Troubleshooting

21 22
The Beast Blade Assembly is unlike any other personal
blender blade assembly on the market. It is crafted from
Grade 301 Stainless Steel, and lled with electronics - rath-
er than just plastic. The Beast Blade Assembly is safe and
intelligent: our industry-leading electronic interlock system
conrms that the Blending Vessel, Blade Assembly, and
Blender Base are all securely connected before it will begin
blending. Further, the Blade Assembly features our thermal
safety shutoff to monitor internal temperature that avoids the
overheating and blending of hot liquids.
In your hands, you have a Beast.
In order to keep your revolutionary Blade Assembly in top
shape, it is important that you follow our care and cleaning
tips.
After each use, rinse your Blade Assembly under hot
water. Use the Blade Cleaning Brush (included) to remove
particles of food in and around the blade area, as well as
in the cavity thread area above the gasket and clean with
soap and water. If preferred, after each use, place Blade
Assembly on the top rack of the dishwasher only. Allow
Blade Assembly to completely dry before re-assembling
your Beast Blender.
If you use your Beast Blender more than three times per week
(which we highly recommend), we suggest replacing your
Blade Assembly and/or Blending Vessels every 6-12 months.
For a step-by-step guide on how best to take care of and
clean your Beast Blender, scan the code below.
Care + CleaningBeast Blade Assembly
CAUTION: Always ensure the product is unplugged from
the electrical outlet before relocating, assembling,
disassembling, or cleaning it.
• Clean the product (as instructed under the “Before Use”
section) immediately after each use.
• Use the Blade Cleaning Brush to remove particles of food
lodged underneath the blades.
• Store the product in a cool, dry place.
• Never remove the gasket from the Beast Blade Assembly.
• Rinse the Blending Vessels and clean with the Beast
Cleaning Brush (if included). If preferred, place Blending
Vessels and Drinking Lids + Carry Caps on the top rack
of the dishwasher only.
• Clean Blender Base periodically with a damp towel or
sponge.
PLEASE NOTE: The white colored components are
susceptible to staining, and should not come in direct
contact with ingredients prone to causing stains, such as:
turmeric, beets, carrots, or other bright colored ingredients.
If these ingredients do come in contact with light-colored
components, immediately follow the cleaning instructions
listed below.
• Rinse the Cloud White accessories under tap water
using a soapy brush or sponge to clean.
• For a deeper wash, follow the cleaning tips above.
• If your Blending Vessel is left for a prolonged period
of time submerged with any of these ingredients, we
recommend scrubbing the stained area with bleach and
allow it to sit overnight.

23 24
Care + Cleaning
PLEASE NOTE: The Tritan™ Blending Vessels are
susceptible to staining and should not come in direct
contact with turmeric. If turmeric does come in contact
with your Blending Vessel, we kindly recommend to
immediately follow these cleaning instructions:
• Fill the Blending Vessel with 1/2 Vinegar & 1/2 Water
and allow to soak for 24 hours.
• Allow the stained vessel to sit outside exposed to the
sunlight for an additional 24 hours, this will help with
staining issues.
For any other care questions, email us at
[email protected].
Warranty
BEAST® BLENDER 2-YEAR LIMITED WARRANTY
This limited warranty applies to authentic Beast® Blenders pur-
chased from Beast Health, LLC or its authorized sellers and used
by consumers in the United States and Canada. Your genuine
Beast® Blender is warranted to be free from defects in material
and workmanship for a period of two (2) years from its date of
original purchase in the USA or Canada. This warranty is provided
with your product at no additional charge. This warranty applies
to the original product purchaser and is nontransferable. Proof of
purchase must be provided with any warranty claim. This limited
warranty applies to household use only and some additional exclu-
sions and limitations apply. If a defect exists in your product and is
subject to this limited warranty, at our sole discretion and option,
we will either repair the product with new or refurbished parts, or
replace the product or any component found to be defective. You
are responsible for all shipping and processing costs associated
with returning the product to us and for our return of a replace-
ment, product, or component to you under this warranty. If a new
or refurbished product or component is no longer available, we will
replace it with a similar Beast Blender of equal or greater value, or
reimburse the purchase price, at our option. This limited warranty
is void and invalid if the unit has been damaged or fails due to: (i)
accident, abuse, misuse or negligent operation; (ii) modication
or alteration; (iii) improper care or maintenance; (iv) unauthorized
third-party repairs or tampering; (v) product exposure to extreme or
abnormal conditions, including natural disasters and acts of God;
or, (vi) operation with a voltage converter or adaptor. This limited
warranty excludes damage or failure resulting from normal wear
and tear. This limited warranty extends to consumer use only and is
void if the product has been utilized in a commercial or institutional
setting.
THIS LIMITED WARRANTY, AND THE REMEDIES SET
FORTH HEREIN, ARE EXCLUSIVE AND PROVIDED
IN LIEU OF ALL OTHER WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER ORAL OR WRIT-
TEN, EXPRESS OR IMPLIED. BEAST HEALTH, LLC
SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE. BEAST HEALTH IS
NOT RESPONSIBLE FOR ANY DIRECT, SPECIAL, INCI-
DENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM ANY ALLEGED BREACH OF WARRANTY OR
CONDITION. IF BEAST HEALTH CANNOT LAWFULLY
DISCLAIM IMPLIED WARRANTIES UNDER APPLICA-
BLE STATE OR PROVINCIAL LAW, ANY REMAINING

25
strong inside™
WARRANTY, INCLUDING WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY AND THE ORIGINAL
PRODUCT PURCHASE PRICE.
This warranty gives you specic legal rights and you may also
have other legal rights that vary from State to State, Province
to Province, depending upon where you live. Some States or
Provinces do not allow limitations or exclusions on how long
an implied warranty lasts or for the exclusion or limitation of
special, incidental, or consequential damages, so the forego-
ing limitations or exclusions may not apply to you.
To make a warranty claim, do not return your product to its
place of purchase, but instead, email us at customerservice@
thebeast.com, utilize the “Contact Us” link at https://thebeast.
com/pages/contact-us, or write to Beast Health, LLC, Cus-
tomer Service, 3019 Wilshire Blvd., Suite 279, Santa Monica,
CA 90403 USA, with your warranty request. To expedite war-
ranty processing, please provide the model, type, and serial
number for your product, together with your name, address,
telephone number, e-mail address, proof of original purchase
(receipt) and description of the product issue or nonconformi-
ty, with your communication.
Warranty

32
Designed in Los Angeles
thebeast.com
thebeast.com/patents
BEAST® is a registered trademark of Beast Health, LLC
Copyright© 2023 Beast Health, LLC Los Angeles, CA 90272
All rights reserved
strong inside™