Beast B10 User manual

MALAXAGE
GUÍA PARA EL USUARIO DEL MODELO B10 HEALTH
BLEND
B10 HEALTH BLENDER USER GUIDE

THIS BOOK COVERS MODEL: B10
Voltage: 120 VAC | Frequency: 60 Hz | Wattage: Max. 1000 W

strong inside.
Meet Beast.
We’ve always known we were supposed to
eat our vegetables.
We’ve always known we were supposed to
drink lots of water.
But didn’t…
So we set out to create a blending and
hydration system that would make Mom proud.
Beast fuels your body with real food: no
processing, no additives, no BS.
From an energy-boosting morning blend, to
nutrient-infused hydration throughout the
day—and even a blended dessert in the
evening—Beast fits seamlessly into your day to
make you...

3 4
Contents
Important Safeguards...............................................................................5-8
What’s Included.................................................................................................9
Before Use...........................................................................................................10
B10 Blender Light Indicators................................................................11-12
How to Use Your B10 Blender............................................................13-16
Vessel Fill Example Chart............................................................................17
Tips & Tricks........................................................................................................18
.
Troubleshooting.......................................................................................19-20
.
Care & Cleaning................................................................................................21
Warranty..............................................................................................................22

IMPORTANT SAFEGUARDS
• To reduce the risk of electric shock, BEAST®BLENDER has a
polarized plug (one prong is wider than the other). This plug will fit
into a polarized outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. DO NOT modify the
plug in any way.
• To protect against the risk of electrical shock, do not put cord,
plug, or base in water or any other liquid.
• Extension cords are not recommended for use with this product.
• DO NOT abuse the power cord. Never carry the appliance by the
power cord or pull on it to disconnect from the electrical outlet.
Instead, grasp the plug itself and pull to disconnect.
• DO NOT operate the BEAST®BLENDER with a damaged cord or
plug, or after it has been dropped or damaged in any manner. The
BEAST®BLENDER has no serviceable parts. Email
[e-mail] if you have any questions or concerns.
• DO NOT let the power cord hang over the edge of a counter or
touch hot surfaces, such as the stove top. Do not place near a hot
gas or electric burner.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
PERSONAL INJURY AND/OR PROPERTY DAMAGE:
• BLADES ARE SHARP! HANDLE WITH CARE. To avoid injury, do
not handle or touch any blade edge. Use caution and grasp by the
blade assembly.
• To protect against electrical shock, do not submerge the
appliance or allow the power cord or blender base to come into
contact with water or liquids.
• The BEAST®BLENDER has moving parts. Avoid contact with
moving parts. Keep fingers out of the container and away from the
blades.
• To reduce the risk of injury, NEVER operate the BEAST®
BLENDER without the vessel properly assembled to the blade
housing. DO NOT try to defeat the interlock mechanism. Ensure
that the vessel is properly installed before operating the appliance.
• Keep hands, hair, clothing, and utensils out of the vessel while
powered on to reduce the risk of severe injury to persons and
damage to the BEAST®BLENDER. You may use a scraper, but only
when the appliance is not running.
• DO NOT operate the BEAST®BLENDER with a damaged blade
assembly, if it malfunctions, or has been dropped or damaged in
any manner. The BEAST®BLENDER blade assembly has no
serviceable parts. Return the appliance to BEAST HEALTH, LLC for
examination, replacement, and/or adjustment.
• To reduce the risk of injury, never place the blade assembly on the
base without the blending vessel properly attached. Always wait
until the motor has stopped completely before removing the
blending vessel.
• Remember to TURN THE POWER SWITCH OFF when the
BEAST®BLENDER is not in use, before assembling or
disassembling parts, and before cleaning. You will know that it has
successfully turned o when the light goes out. To unplug the
BEAST®BLENDER, grasp the plug and pull from the electrical
outlet. Never pull from the power cord.
• DO NOT remove the blending vessel from the Blender Base while
it is operating. Wait until the motor powers down completely, the
blades stop spinning, and the ingredients settle to remove the
vessel and then POWER OFF.
• NEVER BLEND HOT INGREDIENTS AND LIQUIDS. Doing so may
cause excessive steam and pressure to build up in the vessel,
resulting in the potential risk of the vessel and blender base
separating and thereby possibly resulting in personal injury and/or
property damage.
• Never operate the unit for longer than one minute. Blade friction
for prolonged periods can cause heat and related pressure buildup
in a closed vessel, with the danger of personal injury and/or
property damage.
• Ensure the ventilation holes on the rear of the blender base are
kept clean and never obstructed.
• NEVER BLEND CARBONATED INGREDIENTS OR RISING
AGENTS (LEAVENS) IN THE BEAST® BLENDER. These
ingredients incorporate air bubbles that produce foam and cause
breads and cakes to rise. Blending these ingredients may cause
excessive pressure buildup in the container and may cause
personal injury to the user or property damage. Common
leavening agents such as baking powder, baking soda, cream of
tartar, cultured or fermented ingredients, egg whites, salt of
hartshorn, whey protein, sea moss, and yeast should not be
blended in the BEAST®BLENDER.
IMPORTANT SAFEGUARDS CONTINUE ON NEXT PAGE
READ ALL IMPORTANT SAFEGUARDS TO AVOID THE RISK
OF SERIOUS INJURY.
FOR HOUSEHOLD USE ONLY
WHEN USING ELECTRICAL APPLIANCES, ALWAYS FOLLOW
BASIC SAFETY PRECAUTIONS, INCLUDING THE FOLLOWING:
5 6
IMPORTANT SAFEGUARDS

IMPORTANT SAFEGUARDS
SAVE THESE INSTRUCTIONS
7 8
IMPORTANT SAFEGUARDS
• NEVER store ingredients in the blending vessel with the blade
assembly attached, both before and after blending. Some foods
may contain active ingredients or release gases that will expand in
the container. If the ingredients are left in the sealed container,
excessive pressure can build up and pose a risk of personal injury.
To safely store ingredients in the container, first remove the lid to
allow the blend to rest for a few minutes and allow excess gases to
escape. Then use the Storage Lid to cover and store in the
refrigerator, which will release any built-up gases daily.
• The BEAST®BLENDER should not be used to grind hard spices or
beans, as this may cause damage to the blades and/or blending
vessels.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a
person responsible for their safety. Close supervision is necessary
when any appliance is used by or near children. Children should be
supervised to ensure that they do not play with the appliance.
• Do not use your BEAST®BLENDER under the influence of drugs
or alcohol.
• NEVER leave the BEAST®BLENDER unattended while in use.
• BEAST®accessories are not intended to be used in the
microwave, which may result in damage to the accessories.
• ALWAYS use the BEAST
®
BLENDER on a dry, stable, level surface.
• DO NOT use the BEAST®BLENDER within 12 inches of the edge
of the work surface or counter.
• DO NOT operate the BEAST®BLENDER on or near any hot
surfaces (such as a gas or electric burner or in a heated oven).
• DO NOT use attachments or accessories (including canning jars)
not recommended or sold by the manufacturer with the BEAST®
BLENDER. Use of these items may result in fire, electric shock, or
personal injury. It may also void the warranty.
• DO NOT overfill the blending vessel. Fill only to the MAX line, as
ingredients need space to ensure complete and thorough blending
and to avoid damaging the motor.
• DO NOT operate the BEAST®BLENDER with an empty vessel, as
this may cause damage to the motor.
• If the BEAST®BLENDER overheats, a thermal switch will activate
and shut o the motor. To reset, power o the BEAST®BLENDER
and let it cool down for approximately one hour before using again.
• DO NOT use the BEAST®BLENDER for anything other than its
intended use.
• DO NOT use the BEAST®BLENDER outdoors.
• DO NOT wash the blade assembly in the dishwasher, as extreme
heat and harsh detergents may cause damage to these parts.
Wash Blending Vessels on the top rack of the dishwasher only.
• DO NOT remove gasket from blade assembly.
• DO NOT remove the trademarks, serial numbers, or bar codes
from the BEAST®BLENDER.
• DO NOT use the BEAST®BLENDER with a voltage or electricity
converter.
• DO NOT modify the BEAST®BLENDER in any way.
• This appliance has important markings on the plug blade. The
attachment plug or entire cordset (if plug is molded onto cord) is
not suitable for replacement. If damaged, the appliance should be
replaced.

What’s Included Before Use
Parts Included With B10:
1. B10 Blender Base
1a. Standby Switch on Blender Base
1b. Power Switch on Blender Base
1c. Power Cord on Blender Base
2. Blade Assembly
3. 1000mL Blending Vessel
4. Vessel Drinking Lid
5. Carry Cap
6. Storage Lid
Parts Included With B10+ Bundle Only:
7. 500mL Blending Vessel
8. Additional Storage Lid
Looking for more
accessories, scan
code to build out
your Beast!
1
1a
2
3
5
6
7
1c
8
4
FRONT OF UNIT BACK OF UNIT
Included With
B10h/B10+
Bundle Only
1b
910
Before using the product for the first time, disassemble
and wash as follows:
1. Remove the Blade Assembly (2) from the Blending Vessel
(3) by turning the Blade Assembly (2) counterclockwise.
CAUTION: Use caution when handling the Blade Assembly,
as blades are extremely sharp.
2. Hand wash all parts except the B10 Blender Base (1) and
Power Cord (1c) in warm, soapy water. Rinse and
dry thoroughly.
NOTICE: Do not immerse the B10 Blender Base (1) or
Power cord (1c) in water or other liquids. Do not place the
Blender Base or Blade Assembly into a dishwasher or
extremely hot water. Do not use abrasive cleaners to clean
any part of the product.

11 12
White - Solid
Light O
LED BEHAVIOR MEANING
Amber - Solid
Green - Solid
Amber - Flashing
Red - Flashing
Unit On, Ready to Blend
Unit O
Unit On, No Blade and/or
Vessel Connected
Unit On,
Blending In Progress
Motor Overload
Vessel Contents Too Hot
to Safely Blend
B10 Blender Light Indicators (Cont)B10 Blender Light Indicators

13
Max Fill Lines for Blending
1000mL Vessel has a
maximum fill volume of
700mL when used for
blending
500mL Vessel has a
maximum fill volume of
350mL when used for
blending
How to Use Your B10 Blender
1. Plug the B10 Blender Base into a standard 120-volt AC
electrical outlet.
2. Press the orange power switch at rear of Blender Base
to turn ON power to the Blender Base.
3. Fill the Blending Vessel with food contents. Chop any
large ingredients into small pieces to help prevent
overloading the motor. Your Blender Vessel should
contain at least 1/3 liquid for best results.
Pro Tip: Refer to “The Perfect Blend” insert card for helpful
filling information.
4. Attach the Blade Assembly to the Blending Vessel
by turning the Blade Assembly clockwise until firmly
secured to the Blade Assembly.
5. Mount the Blending Vessel with Blade Assembly onto the
Blender Base by twisting clockwise until the Blade Assembly
clicks into place.
6. Press the Standby Switch for >1 second to begin the
timed blend cycle OR Press the Standby Switch for <1
second to manually pulse the blades.
14
Blending Features
There are two blending features on your Beast Blender
1. Blend Cycle
The 1-minute timed blend cycle is intelligently
programmed to eciently blend your ingredients.
Best for: This method is best for blending smoothies,
sauces, dips, cocktails, and spreads.
2. Pulse Cycle
The Pulse Cycle allows you to have control over chopping,
grinding and pulsing your ingredients while keeping them
whole without emulsifying.
Best for: This method is particularly useful for grinding
coee beans, making chunky salsa, chopping onions, and
adding chunks of ingredients to an already smooth
mixture for texture.
Tip: Use this Cycle for your Hydration System (sold
separately and available with B10+ bundles).

15 16
7. Once unit has completed blending cycle and light has
changed from Green to White, unmount the Blending
Vessel with Blade Assembly from the Blender Base by
twisting counter-clockwise.
8. Remove the Blade Assembly from the Blending Vessel
by turning the Blade Assembly counter-clockwise until the
Blade Assembly can be removed.
9. Press the Power Switch at rear of Blender Base to turn
OFF power to the unit.
10. Drink blend directly from the Blend Vessel, add the
Vessel Drinking Lid and Carry Cap to take your blend
on-the-go, or use the Storage Lid to blend for later in
the refrigerator.
How to Use Your B10 Blender (Cont)
1 2
43
5 6
MAX
1+
SEC
BLEND
1
MIN

17 18
7 8
9 10
11
<1
SEC
PULSE
<1
SEC
OR OR
Vessel Fill Example Chart
The below chart provides examples of ingredient types,
amounts, and time required to blend/grind in each vessel.
BLENDING Carrots
& Water
1000mL
Blending
Vessel
(700mL
Max Fill)
with Blade
Assembly
ATTACHMENTTYPE
LOAD
280g Carrots
420g Water
CAPACITY
60s
OPERATING
TIME
GRINDING Wheat,
Rice,
Corn
1000mL
Blending
Vessel
(700mL
Max Fill)
with Blade
Assembly
600g 60s
BLENDING Carrots
& Water
500mL
Blending
Vessel
(350mL
Max Fill)
with Blade
Assembly
140g Carrots
210g Water
60s
GRINDING Coee
Beans,
Spices
500mL
Blending
Vessel
(350mL
Max Fill)
with Blade
Assembly
100g 20s

Tips & Tricks
Shake Method to Loosen Stuck Ingredients
When blending tough foods, large ingredients, or with a
limited amount of liquid in the vessel, the contents of the
Blending Vessel may become stuck and require a manual
method of freeing up the contents in order to continue
blending.
1. Remove the Blade Assembly with Blending Vessel from
the Blender Base.
2. With the Blade Assembly and Blending Vessel in hand,
shake it up and down thoroughly.
3. Reattach to the Blender Base to finish blending.
How to Crush Frozen Fruit
Pulsing is a useful way to coarsely chop ingredients without
totally emulsifying them.
1. Pulse 5-7 times to chop up and soften ingredients, and
then use the full Blend Cycle
2. Make sure your blend has at least 1/3 liquid as this is the
optimal ratio for the best blending experience!
19 20
Troubleshooting
Please refer to LED Light Behavior in the “Using Your B10
Blender” section.
• If the LED light indicator displays:
No Visible Light
That Means: Your blender unit is not powered on.
Try: Make sure that the Blender Base is plugged into a
functioning standard 120-volt AC electrical outlet. Then
power ON the unit by pressing the Power Switch at the back
of the unit.
• If the LED light indicator displays:
Solid-Amber Color Light
That Means: Your blender unit is powered on, but the Blade
Assembly and/or Blending Vessel is not properly connected.
Try: Confirm that the Blade Assembly is firmly threaded
onto the Blending Vessel. Then confirm that the Blade
Assembly and Blending Vessel are twisted onto the base
until it clicks into place and the LED indicator displays a
Solid-White color light.
Then:
1. If the light is still flashing amber, press the orange switch
button on the back of the base to turn o the blender and
unplug for 24 hours to reset the unit.
2. While the unit is unplugged from the outlet, use a damp
towel to wipe down the contact points on the base of the
unit and blade assembly. Reference below diagram for
contact points on blender base.
3. Finally, use a dry towel to wipe down the contact points to
ensure it is completely dry and ready to be connected.

21
Troubleshooting
• If the LED light indicator displays:
Flashing-Amber Color Light
That Means: The motor is overloaded.
Try: Power OFF the unit by pressing the Power Switch on
the back of the unit. Wait 30 seconds for the unit to reset.
Then:
1. If the contents of the Blending Vessel appear to be stuck in
place, perform the “Shake Method” listed in the “Tips &
Tricks” section to free up the ingredients before continuing
blending.
2. If the Blending Vessel is filled beyond the Max Fill line,
remove the Blade Assembly from the Blending Vessel.
Remove enough contents to bring the fill level down to or
below the Max Fill line. Then go to step 4 of the “How to Use
Your B10 Blender” section to continue blending.
3. If the LED light indicator continues to display a Flashing
Amber light, the motor itself may be overheated and will
require time to cool down. Power OFF the unit, and allow to
cool for one hour before attempting to blend again.
If the Blade Assembly is stuck on the Blending Vessel
after blending:
That Means: Your Blade Assembly may not be screwed on
tightly, which will cause the ingredients to spill into the
threading at the beginning of the blending cycle.
Try:
1. Let the Blending Vessel and the Blade Assembly sit in the
fridge overnight - try to detach once it is very cool.
2. After removing from the fridge, try to run hot water over
the area where the threads to expand the materials to make
it easier to loosen the Assembly Blade.
3. You may also try lightly tapping the threaded part of the
vessel + blade at an angle on the countertop to loosen the
blade. This may be unconventional but it works like a charm!
Troubleshooting
Troubleshooting
• If the LED light indicator displays:
Flashing-Red Color Light
That Means: The contents of the Blending Vessel are too hot
to safely blend.
Try:
1. Power OFF the unit by pressing the Power Switch on the
back of the unit. Wait for 30 seconds for the unit to reset
before powering back on.
2. Make sure that the contents of the Blending Vessel are at
or below room temperature before continuing to blend.
• If your Beast Blender motor sounds like it is laboring and
blending is not ecient
That Means: Your Blending Vessel may be overfilled, or
Blending Vessel contents may be stuck.
Try:
1. If the contents of the Blending Vessel appear to be stuck in
place, perform the “Shake Method” listed in the “Tips &
Tricks” section to free up the ingredients before continuing
blending.
2. If the Blending Vessel is filled beyond the Max Fill line,
remove the Blade Assembly from the Blending Vessel.
Remove enough contents to bring the fill level down to or
below the Max Fill line. Then go to step 4 of the “How to Use
Your B10 Blender” section to continue blending.
If you are still not able to get your unit working properly,
please reach out to [email protected] and we will be
happy to help you.
22

23 24
Care & Cleaning
CAUTION: Always ensure the product is unplugged from
the electrical outlet before relocating, assembling,
disassembling, or cleaning it.
• Clean the product (as instructed under the "Before Use"
section) immediately after each use.
• Use the Beast Cleaning Brush (sold separately) after each
use. Use the main cleaning head to clean larger items, and
use the detailing tool to clean around the gasket on the
Blade Assembly to remove particles of food lodged
underneath the blades after each use.
• Rinse Blade Assembly under tap water to clean, using a
soapy sponge if necessary. Do not place the Blade Assembly
in the dishwasher. Dry the Blade Assembly on a drying rack.
• For a deeper wash, place Blending Vessels on the top rack
of the dishwasher only.
• Never remove the gasket from the Blade Assembly.
• Clean Blender Base periodically with a damp towel
or sponge.
• Once a week, make a simple blend in a vessel with 2/3 of
water and a couple drops of dish soap on the Blend Cycle.
• Once a month, clean the vessel with 1/2 vinegar and 1/2
water. Let it sit in the vessel for 30 minutes, and then let it
run on a Blend Cycle. Finish the process by using Beast
Cleaning Brush on the Blade Assembly and Blending vessel.
• Make sure all components are completely dry before
assembling and storing as any damp residue can result in
foul smells.
• Store the product in a cool, dry place.
PLEASE NOTE: The White and Grey colored components
are susceptible to staining, and should not come in direct
contact with ingredients prone to causing stains, such as:
turmeric, beets, carrots, or other bright colored ingredients.
If these ingredients do come in contact with light-colored
components, immediately follow the cleaning instructions
listed above.
Warranty
BEAST BLENDER 2-YEAR LIMITED WARRANTY
This warranty applies to Beast Health, LLC authentic
products purchased and used in the United States and
Canada. This is the only express warranty for this product
and is in lieu of any other warranty or condition.
This product is warranted to be free from defects in material
and workmanship for a period of two (2) years from date of
purchase in the USA or Canada and comes with the product
at no extra charge. Proof of purchase must be provided.
During this period, your exclusive remedy is repair or
replacement of this product or any component found to be
defective, at our discretion. However, you are responsible for
all shipping and processing costs associated with returning
the product to us and our return of a replacement, product,
or component under this warranty to you. If the product or
component is no longer available, we will replace it with a
similar one of equal or greater value. This limited warranty is
void and invalid if the unit has been damaged by abuse or
misuse, if the product has not been maintained properly, and
if safeguards or warnings have not been followed.
We exclude all claims for special, incidental, and
consequential damages caused by breach of express or
implied warranty. We exclude normal wear and tear. This
limited warranty applies to consumer use only. All liability is
limited to the amount of the purchase price. Every implied
warranty, including any statutory warranty or condition of
merchantability or fitness for a particular purpose, is
disclaimed except to the extent prohibited by law, in which
case such warranty or condition is limited to the duration
of this written warranty. This warranty gives you specific
legal rights. You may have other legal rights that vary
depending on where you live. Some states or provinces do
not allow limitations on implied warranties or special,
incidental, or consequential damages, so the foregoing
limitations may not apply to you.
To make a warranty claim, do not return this appliance
to the store. Instead, email [e-mail]. For faster
service, locate the model, type, and series numbers on
your appliance.

ESTE LIBRO ES PARA EL MODELO: B10
Voltaje: 120 VCA | Frecuencia: 60 Hz | Vatios: Máx. 1000 W

fuerte por dentro.
Le presentamos a Beast.
Siempre supimos que debíamos comer nuestras
verduras.
Siempre supimos que debíamos beber mucha
agua.
Pero yo no lo hacía…
En consecuencia, decidimos crear un sistema
de licuado e hidratación para que mamá se
sienta orgullosa.
Beast aporta alimentos verdaderos al cuerpo:
sin procesar, sin aditivos, sin mentiras.
Desde un licuado matinal para obtener energía
hasta una hidratación llena de nutrientes a lo
largo del día, e incluso un postre licuado por la
tarde, Beast encaja en su jornada de manera
ideal para que sea...

3 4
Contenido
Indicaciones de protección importantes.........................................5-8
Qué se incluye.......................................................................................................9
Antes del uso.......................................................................................................10
Indicadores luminosos de la licuadora B10...................................11-12
Cómo utilizar la licuadora B10.............................................................13-16
Tabla con ejemplos de llenado del vaso..............................................17
Sugerencias y trucos.......................................................................................18
Resolución de problemas....................................................................19-20
Cuidado y limpieza...........................................................................................21
Garantía..................................................................................................................22

INDICACIONES DE PROTECCIÓN IMPORTANTES
• Para reducir el riesgo de descargas eléctricas, la LICUADORA BEAST®
tiene un enchufe polarizado (una pata es más ancha que la otra). Este
enchufe encajará en una toma polarizada únicamente de una manera. Si
el enchufe no encaja completamente en la toma, inviértalo. Si aún no
encaja, comuníquese con un electricista cualificado para instalar la toma
correcta. NO modifique el enchufe de ningún modo.
• Como protección contra el riesgo de descargas eléctricas, no ponga el
cable, el enchufe ni la base en agua ni en ningún otro líquido.
• No se recomienda el uso de cables prolongadores con este producto.
• NO abuse del cable de alimentación. Nunca traslade el aparato por el
cable de alimentación ni tire del cable de alimentación para
desconectarlo de la toma de electricidad. Debe tomar el enchufe y tirar
de él para desconectarlo.
• NO opere la LICUADORA BEAST®con un cable o enchufe dañados, ni
después de que se haya caído o dañado de cualquier modo. La
LICUADORA BEAST®no tiene piezas a las que pueda darse servicio.
Escriba a [email protected]om si tiene alguna pregunta o inquietud.
• NO permita que el cable de alimentación cuelgue sobre el borde de la
encimera ni que esté en contacto con superficies calientes, como la
parte superior de la cocina. No lo coloque cerca del gas caliente ni de un
quemador eléctrico.
PARA REDUCIR EL RIESGO DE INCENDIOS, DESCARGAS
ELÉCTRICAS O LESIONES PERSONALES Y DAÑOS MATERIALES:
• ¡LAS HOJAS DE LA CUCHILLA SON FILOSAS! TENGA CUIDADO AL
MANIPULAR. Para evitar lesiones, no manipule ni toque los bordes de las
hojas de la cuchilla. Tenga precaución y sujete por el conjunto de la
cuchilla.
• Como protección contra las descargas eléctricas, no sumerja el aparato
ni permita que el cable de alimentación o la base de la licuadora entren
en contacto con agua o líquidos.
• La LICUADORA BEAST®tiene piezas móviles. Evite el contacto con las
piezas móviles. Mantenga los dedos fuera del recipiente y alejados de las
hojas de la cuchilla.
• Para reducir el riesgo de lesiones, NUNCA opere la LICUADORA
BEAST®sin el vaso ensamblado correctamente en el alojamiento de las
cuchillas. NO intente alterar el mecanismo de interbloqueo. Asegúrese
de que el vaso esté instalado correctamente antes de operar el aparato.
• Mantenga las manos, el cabello, la ropa y los utensilios fuera del
vaso cuando el aparato esté encendido para reducir el riesgo de
lesiones personales graves y daños en la LICUADORA BEAST
®
. Es
posible utilizar un elemento para raspar, pero únicamente cuando el
aparato no está en funcionamiento.
• NO opere la LICUADORA BEAST
®
con un conjunto de la cuchilla
dañado, si funciona inadecuadamente o si se cayó o dañó de
cualquier modo. El conjunto de la cuchilla de la LICUADORA BEAST
®
no tiene piezas a las que pueda darse servicio. Regrese el aparato a
BEAST HEALTH, LLC para que lo examinemos, reemplacemos o
ajustemos.
• Para reducir el riesgo de lesiones, nunca coloque el conjunto de la
cuchilla en la base sin que el vaso esté conectado correctamente.
Siempre espere que el motor se haya detenido por completo antes
de retirar el vaso.
• Recuerde APAGAR EL APARATO DESDE EL INTERRUPTOR DE
ALIMENTACIÓN cuando la LICUADORA BEAST
®
no esté en uso,
antes de ensamblar o desmontar piezas y antes de limpiarlo. Sabrá
que el aparato se apagó correctamente cuando la luz se apague.
Para desenchufar la LICUADORA BEAST
®
, tome el enchufe y tire
para retirarlo de la toma de electricidad. Nunca tire del cable de
alimentación.
• NO retire el vaso de la base de la licuadora cuando el aparato esté
en funcionamiento. Espere que el motor se apague del todo, que las
hojas de la cuchilla dejen de girar y que los ingredientes se asienten
para retirar el vaso. A continuación, APAGUE EL APARATO.
• NUNCA LICUE INGREDIENTES NI LÍQUIDOS CALIENTES. Si lo
hace, pueden producirse un vapor excesivo y la acumulación de
presión en el vaso, con el potencial riesgo de que el vaso y la base
de la licuadora se separen, lo que puede resultar en lesiones
personales y daños materiales.
• Nunca opere la unidad durante más de un minuto. La fricción de la
cuchilla durante periodos prolongados puede provocar calor y la
acumulación de presión relacionada en el vaso cerrado, con peligro
de lesiones personales y daños materiales.
• Asegúrese de que los orificios de ventilación de la parte posterior
de la base de la licuadora permanezcan limpios y nunca tengan
obstrucciones.
• NUNCA LICUE INGREDIENTES GASIFICADOS NI AGENTES PARA
ELEVAR (LEVADURAS) EN LA LICUADORA BEAST®. Estos
ingredientes incorporan burbujas de aire que producen espuma y
hacen que los panes y los pasteles se eleven. Si se licuan estos
ingredientes, puede acumularse una presión excesiva en el
recipiente, lo cual puede provocar lesiones personales al usuario o
daños materiales. No deben licuarse levaduras comunes ni polvo
para hornear, bicarbonato de sodio, cremor tártaro, ingredientes
cultivados o fermentados, clara de huevo, sal hartshorn, proteína de
suero ni musgo marino en la LICUADORA BEAST
®
.
LAS INDICACIONES DE PROTECCIÓN IMPORTANTES CONTINÚAN
EN LA PRÓXIMA PÁGINA
5 6
INDICACIONES DE PROTECCIÓN IMPORTANTES
LEA TODAS LAS INDICACIONES DE PROTECCIÓN IMPORTANTES
PARA EVITAR EL RIESGO DE LESIONES GRAVES.
PARA USO DOMÉSTICO ÚNICAMENTE
AL UTILIZAR APARATOS ELÉCTRICOS, SIGA SIEMPRE LAS
PRECAUCIONES BÁSICAS DE SEGURIDAD, INCLUIDAS LAS
SIGUIENTES:

INDICACIONES DE PROTECCIÓN IMPORTANTES
GUARDE ESTAS INSTRUCCIONES
7 8
INDICACIONES DE PROTECCIÓN IMPORTANTES
• NUNCA guarde ingredientes en el vaso con el conjunto de la cuchilla
colocado, ni antes ni después de licuarlos. Algunos alimentos pueden
contener ingredientes activos o liberar gases que se expandirán en el
recipiente. Si se dejan los ingredientes en el recipiente sellado, es posible
que se acumule una presión excesiva, lo que representa el riesgo de
sufrir lesiones personales. Para guardar de manera segura ingredientes
en el recipiente, en primer lugar retire la tapa para permitir que el licuado
repose unos minutos y que escapen los gases excesivos. A continuación,
utilice la tapa de almacenamiento y guárdelo en el refrigerador. Así, los
gases acumulados se liberarán a diario.
• La LICUADORA BEAST®no debe utilizarse para moler especias duras
ni frijoles. Esto podría provocar daños en las hojas de la cuchilla o en el
vaso.
• Este aparato no está destinado para que lo utilicen personas (incluidos
niños) con capacidades físicas, sensoriales o mentales reducidas, o falta
de experiencia y conocimientos, a no ser que cuenten con una
supervisión cercana y que una persona responsable por su seguridad las
instruya en relación con la utilización del aparato. Es necesaria una
supervisión cercana cuando cualquier aparato es utilizado por niños o en
la proximidad de niños. Debe supervisarse a los niños para asegurar que
no jueguen con el aparato.
• No utilice la LICUADORA BEAST®bajo la influencia de drogas o
alcohol.
• NUNCA deje de prestar atención a la LICUADORA BEAST®cuando
esté en uso.
• Los accesorios BEAST®no deben utilizarse en el microondas. Esto
podría resultar en daños en los accesorios.
• SIEMPRE utilice la LICUADORA BEAST®en una superficie seca, estable
y nivelada.
• NO utilice la LICUADORA BEAST®a menos de 12 pulgadas del borde
de la superficie de trabajo o de la encimera.
• NO opere la LICUADORA BEAST®en ninguna superficie caliente ni
cerca en su proximidad (como en el caso de las hornallas a gas o
eléctricas, o de un horno caliente).
• NO utilice elementos conectados ni accesorios (como frascos para
guardar) que no sean recomendados o vendidos por el fabricante con la
LICUADORA BEAST®. La utilización de estos elementos conectados o
accesorios puede resultar en incendios, descargas eléctricas o lesiones
personales. También puede anular la garantía.
• NO llene el vaso en exceso. Llene el vaso solo hasta la línea MÁX. Es
necesario que los ingredientes tengan espacio para asegurar un licuado
completo y exhaustivo, y para evitar daños en el motor.
• NO opere la LICUADORA BEAST®con el vaso vacío. Esto podría
provocar daños en el motor.
• Si la LICUADORA BEAST®se sobrecalienta, se activará un interruptor
térmico que apagará el motor. Para restablecer la LICUADORA BEAST®,
apáguela y déjela enfriar durante aproximadamente una hora antes de
volver a utilizarla.
• NO utilice la LICUADORA BEAST®para ningún uso que no sea el
previsto.
• NO utilice la LICUADORA BEAST®al aire libre.
• NO lave el conjunto de la cuchilla en el lavavajillas. El calor extremo y
los detergentes intensos pueden provocar daños en estas piezas. Lave el
vaso de la licuadora en el bastidor superior del lavavajillas.
• NO retire la junta del conjunto de la cuchilla.
• NO retire las marcas, los números de serie ni los códigos de barras de
la LICUADORA BEAST®.
• NO utilice la LICUADORA BEAST®con ningún convertidor de voltaje o
electricidad.
• NO modifique la LICUADORA BEAST®de ningún modo.
• Este aparato tiene marcas importantes en la pata del enchufe. No
pueden reemplazarse el enchufe de conexión ni el conjunto del cable (si
el enchufe está moldeado en el cable). Si se producen daños, debe
reemplazarse el aparato.

Qué se incluye Antes del uso
Piezas que se incluyen con B10:
1. Base de la licuadora B10
1a. Interruptor de espera de la base
de la licuadora
1b. Interruptor de alimentación de la base
de la licuadora
1c. Cable de alimentación de la base
de la licuadora
2. Conjunto de la cuchilla
3. Vaso de la licuadora de 1000 mL
4. Tapa para beber del vaso
5. Tapa de traslado
6. Tapa de almacenamiento
Piezas que se incluyen solo con el paquete B10+:
7. Vaso de la licuadora de 500 mL
8. Tapa de almacenamiento adicional
¿Busca más
accesorios?
¡Escanee el
código para crear
su propia Beast!
1
1a
2
3
5
6
7
1c
8
4
PARTE DELANTERA
DE LA UNIDAD
PARTE POSTERIOR
DE LA UNIDAD
Solo se incluyen con
B10h/paquete B10+
1b
910
Antes de utilizar el producto por primera vez, desmóntelo y
lávelo de la manera siguiente:
1. Extraiga el conjunto de la cuchilla (2) del vaso (3). Para ello, gire
el conjunto de la cuchilla (2) en sentido antihorario.
PRECAUCIÓN: Tenga precaución al manipular el conjunto de la
cuchilla, ya que las hojas son extremadamente filosas.
2. Lave todas las piezas con la mano, excepto la base de la
licuadora B10 (1) y el cable de alimentación (1c), en agua jabonosa
tibia. Enjuáguelas y séquelas bien.
AVISO: No sumerja la base de la licuadora B10 (1) ni el cable de
alimentación (1c) en agua ni en ningún otro líquido. No coloque la
base de la licuadora ni el conjunto de la cuchilla en el lavavajillas ni
en agua extremadamente caliente. No utilice limpiadores
abrasivos para limpiar ninguna pieza del producto.