Becker TRAFFIC ASSIST PRO User manual

Operating instructions GB

2
Index
The Traffic Assist Pro 7
Use 7
Navigation 7
Music 7
Pictures 7
Unpacking the Traffic Assist Pro 8
Checking the delivery 8
Delivery contents 8
Complaints procedure 8
Handling the packaging 8
Description of unit 8
Traffic Assist Pro – Basic unit 9
Adapter-Power Supply 9
Battery 9
SD memory card 9
USB connection cable 9
Accessories 10
mains charger 10
External GPS antenna 10
Headset 10
Information about
documentation 10
Quick start guide 10
Operating instructions 10
Maintenance and care 10
Registration 11
Repairs 11
Disposal 11
Emissions 11
Overview Traffic Assist Pro 12
Maintenance and care 17
Battery quality declaration 18
Display quality declaration 18
Start-up 18
SD-Card 18
Inserting the SD memory card 19
Ejecting the SD memory card 19
Power supply 20
Using the battery 20
Via the public mains grid 20
Connecting up to power supply 20
Removing power supply 20
Via the vehicle battery
(cigarette lighter socket) 20
Via the TMC receiver 21
Antenna 21
GPS antenna 21
TMC antenna 21
Switching the Traffic Assist
Pro on/off 22
Switching on 22
Switching off 22
Unit bracket 23
Traffic Assist Pro with TMC 23
Traffic Assist Pro without TMC 23
Fitting the unit bracket 24
On the windscreen 24
On the dashboard 24
Moving the unit holder 25
Vertical movements 25
Horizontal movements 25
Attaching the Traffic Assist Pro 25
Connecting the telephone mute
function 26
Basic information about the
touch screen 26
Operation 26
Calibration 26
Basic information about the
menus 26
The main menu 26
Entries made with the entry menu 27
Entering characters 27
Adopting suggestions 27
27
Scrolling through the lists 27
Special characters and umlauts 28
Entering numbers 28
Deleting characters 29
inserting spaces 29
The back key 29
More maps 29
Installation program 29
Transferring files 30
Transferring using the SD card
reader 30
Transferring via the USB interface 30
Transferring maps 30
Transferring music and images 31
Faults 31

3
Index
Navigational mode 32
What is navigation? 32
Selecting navigation 33
Aids for navigation 33
Rapid access 33
Navigation menu 33
Map display 33
Rapid access 33
Structure of rapid access 33
Navigation menu and map display 33
The list of destinations 34
Icons used 34
Operating rapid access 34
Starting using an existing
destination 34
Scrolling in the destinations
memory 34
Displaying or editing destination 35
Change to map display 35
Displaying current position 35
35
Calling up Navigation menu 35
TheNavigation menu 36
Structure of the navigation menu 36
Navigation 36
Route planning 36
Settings 36
Status 36
Load map 36
Home 36
Navigation menu: Navigation 37
Destination selection window 37
Destination: Selecting a country 37
Destination: select address and
start 38
Voice selection 41
Stopping navigation 42
Destination: Points of interest
select 42
Point of interest: nearby 43
Point of interest: nationwide 43
Point of interest: in a town 44
Destination: selecting from
the map 44
Navigation menu: Route planning 45
Route list 46
Scrolling through the list of routes 46
Using a route 46
The New route button 47
The Edit key 47
The Calculate key 48
The Start key 48
Navigation menu: Settings 48
The Route info key 49
The Signpost info button 49
The Routing options button 50
The Volume key 50
The Map info key 51
The Automode key 51
The Time Zone key 52
The Route planning key 52
The Format key 52
The Speedkey 53
The Home adress key 54
The TMC button 54
The Smart Speller button 55
The Factory settings key 55
Navigation menu: Status 55
Navigation menu: Load map 56
Navigation menu: Home 56
What is dynamic route guidance? 56
Displaying TMC messages on
the map 57
Using TMC 57
Updating the announcement list 58
Station selection 58
Taking announcements into
consideration when calculating
routes 58
Automatic recalculation 58
Manual recalculation 59
Map display 59
Map layout 60
Map display without driving
guidance 60
Map display with driving guidance 60
Map display with toolbar 61
Using the map display 61
Repeating the last announcement 61
Adjust voice prompt volume 61
Information rows 62
Zooming and the map (toolbar) 62
Display route (toolbar) 62

4
Index
Position and display mode
(toolbar) 63
Displaying TMC messages
(toolbar) 63
Change display (toolbar) 63
Point northwards (toolbar) 64
Move map (toolbar) 64
Call Options menu 64
Position information (toolbar) 65
Playback of MP3 files during an
active navigation 66
Music operations 67
Selecting music playback 67
The MP3 player 67
Operating the MP3-Players 68
Scrolling 68
Play 68
Pause 68
Folder overview 69
Opening the next folder 69
Repeat current track 69
Setting volume 69
Navigation during MP3 player
operation 69
Closing the MP3-Player 70
Pictures mode 71
Selecting pictures display 71
Picture viewer 71
Operating the Picture Viewers 71
Scrolling 71
Adjusting the music volume 71
Slideshow 72
Full screen 72
Shutting down the Picture Viewer 72
Folder viewing mode 72
Operating folder viewing mode 73
Subfolders 73
Scrolling 73
Selecting a picture 73
Changing folder levels 73
Closing folder viewing mode 73
Settings 74
Selecting the settings 74
The setting menu 74
Operation 74
Selection possibilities 74
Closing the setting menu 74
The individual menu points 74
Energy 74
Displaying the energy supply 74
Ending the status display 75
Brightness 75
Calibration 75
Starting calibration 75
Language 76
Calling up language selection 76
Turn the page 76
Selecting the language 76
Cancelling the language selection 76
Sounds 76
Information 77
Keywords 80
Technical Data 83
FACT SHEET 84
The information contained herein may
be changed at any time without prior no-
tification. This manual nor any parts the-
reof may not be reproduced for any
purpose whatsoever without the express
written consent of HARMAN/BECKER
Automotive Systems GmbH.
© Copyright 2006, HARMAN/
BECKER Automotive Systems GmbH
All rights reserved.

5
!Safety information
• The unit may only be operated if the traffic situation allows for this and if you are absolutely certain that you
yourself, your fellow passengers or other road users will not be put at risk, encumbered or disturbed by this. The
rules of applicable road traffic acts must be observed at all times. Destinations may only be input when the vehicle
is stationary.
• The navigational system is only an aid. The data/details provided may in some cases be incorrect. The driver must
always decide whether to follow the details given or not. We accept no liability for the navigational system issuing
incorrect details. As a result of traffic routing changes and deviating data, inaccurate or incorrect instructions
may be given. Drivers should always pay attention to the actual road signs and traffic control. In particular, the
navigational system cannot be used as a means of orientation in cases of poor visibility.
• The unit may only be used for its intended purpose. The volume of the Navigationsgerätes should be set so that
noises outside the vehicle can still be heard.
• The unit should be switched off immediately if faults occur (e.g. development of smoke or smells).
• For safety reasons, the unit may only be opened by a specialist. Please contact your local stockist if you require
repairs.

6
• The SD memory card can be removed. Caution! Small children could swallow it.
• The mains voltages (V) indicated on the mains charger, the car power adapter and the unit must not be exceeded.
Failure to observe this may result in destruction of the unit and the charger and cause the battery to explode.
• Never open the unit or the rechargeable battery. Any modification to the unit is also impermissible and renders
the type approval invalid.
• Use only genuine BECKER original accessories. This will ensure that all the relevant regulations are complied
with and damage to health and property is avoided. Dispose of defective units and the rechargeable battery
according to the applicable legal requirements.
• No warranty is granted in the case of improper use. These safety instructions also apply to genuine BECKER
original accessories.

7
The Traffic Assist Pro
Use
The Traffic Assist Pro is a powerful
PND (Personal Navigation Device) for
use in vehicles and closed spaces. The
unit should be protected from dampness
and dirt.
The Traffic Assist Pro can be used as:
• navigational unit
• MP3 (device for playing music)
• JPEG image viewer
Navigation
Thanks to GPS = Global Positioning
System, you no longer need to spend
hours searching through road atlases.
The folding receiving antenna gives you
constant access to navigation options
when outside in the open. Depending on
reception, you may not be able to use the
navigational function inside buildings.
When used in vehicles, you may not be
able to adequately receive GPS data de-
pending on how the Traffic Assist Pro is
installed. In such cases, you will have to
connect up an external antenna (does not
fall within the scope of supply).
Depending on the version, the Traffic
Assist Pro is equipped with TMC, which
gives you the option of receiving traffic
announcements via the TMC antenna
provided. Traffic announcements are
transmitted when the TMC is active. The
system plans an alternative route
automatically or on request to avoid
traffic problems, depending on the
setting.
The TMC receiver and antenna are also
available as accessories from your local
dealer.
Music
Thanks to the integrated MP3-Player,
you can listen to your favourite tracks
when on the go.
Pictures
The Traffic Assist Pro has a Picture
Viewer offering many functions for vie-
wing pictures.
3012

8
Unpacking the Traffic Assist
Pro
Checking the delivery
Before the Traffic Assist Pro is started
up, the delivery should be checked
to ensure that it is complete and in the
correct condition (see also page 12).
!Carefully unpack the content of the
package and check it.
Delivery contents
Complaints procedure
Please contact your local stockist if you
have any complaints. The unit can also
be sent directly to Harman/Becker in its
original packaging.
Handling the packaging
Keep the original packaging in a dry
place, at least for the warranty period.
Description of unit
The Traffic Assist Pro consists of the
basic unit Traffic Assist Pro and the ac-
cessories included in the delivery.
You will find photos of the individual
parts under:
See “Delivery contents” on page 12.
Note:
Your Traffic Assist Pro is supplied in
stable packaging. Do not unpack the
unit in full if you discover any serious
damage to the packaging or its content.
If this happens, please contact your lo-
cal stockist.
Note:
The achievement without TMC has not
included a TMC-Antena or a TMC-ac-
ceptor.
4012
Note:
The packaging should be disposed of
correctly in accordance with national
disposal guidelines. The packaging
must not be burnt. Depending on the
country to which the unit is supplied, it
may be possible for local stockists to
accept packaging.
Note:
The basic unit and accessories must not
be opened or modified in any way.

9
Traffic Assist Pro – Basic unit
The basic unit consists of a complete
electronic unit, a folding antenna for
receiving GPS signals, a touch screen
for communication, an integrated
speaker for broadcasting
announcements during navigation and
for MP3 files, a microphone for
recording voice commands and various
connections and interfaces.
Further information on the unit can be
found in "Technical Data" on page 83.
Adapter-Power Supply
This cable allows the unit to be connec-
ted up to the car's cigarette lighter.
The power supply must satisfy the follo-
wing requirements:
• DC current 12-36 volts
1.5 amps
Battery
When the replaceable battery is flat, it
can be recharged by connecting the
Traffic Assist Pro to the power supply.
Use the car adapter to connect the unit to
an on-board power socket in the vehicle,
the mains charger to connect to the
mains power supply (100-240V) or the
USB cable to connect to a PC.
SD memory card
A SD memory card serves as a storage
medium for road maps, music tracks and
images.
The card supplied with the unit has a
capacity of 2 GB and space for a set of
road maps and a limited number of MP3
files and/or images. The number of
music/image files that can be stored on
the card depends on the size of the files.
Alternatively, you can connect a USB
memory stick to the USB port to play
MP3 files or display images.
When removed from the unit, store the
SD memory card in the packaging
provided in a dry location away from
direct sunlight. Avoid touching the
contact strip and keep clean at all times.
• Further information on the SD me-
mory card can be found in See “SD
Card” on page 78.
USB connection cable
You can connect the unit to a standard
personal computer with a USB interface
using a USB connecting cable. You can
also charge the Traffic Assist Pro using
the USB cable.
Note:
Using USB memory sticks to play MP3
files or display images may
significantly decrease the capacity of
the battery.
Note:
Using USB memory sticks (for MP3s)
may interfere with the GPS signal.

10
Accessories
mains charger
This power supply allows connection of
the Traffic Assist Pro to a mains outlet
(not included in standard equipment).
Please consult your
local specialist dealer.
Requirements for power supply:
Alternating current
•100-240V
0.5 Amps
•50-60Hertz
External GPS antenna
Vehicles with limited GPS reception can
be fitted with an external antenna (not
included in standard equipment) to im-
prove the reception. Please consult your
local specialist dealer.
Headset
When using the Traffic Assist Pro as an
MP3 player, commercially available
headphones with a 3.5 mm jack or adap-
ter can be connected (not included).
Information about
documentation
Quick start guide
The Quick Start Guide is designed to
provide a brief introduction to operating
your Traffic Assist Pro. The most impor-
tant basic functions of the Traffic Assist
Pro are explained in the Quick Start Gui-
de.
Operating instructions
A comprehensive explanation of the
Traffic Assist Pro functionalities is con-
tained in these operating instructions.
Maintenance and care
Note:
The integrated GPS antenna is not
suitable for use in vehicles with anti-
glare windows (metalised thermo-glass
or metal foil, indicated by the window
label - SIGLA SOL, SIGLA CHROM,
SIGLA, KOOL-OF, SUNGATE, etc.)
and vehicles with fine-meshed heating
wires in the windows.
If this is the case, use an external GPS
antenna. Please consult your local
specialist dealer.
Danger!
Headsets must not be worn during tra-
vel. Observe national regulations and
legislation on this matter.
When using the headset, lower the vo-
lume so that your hearing is not dama-
ged.
Note:
Do not use aggressive or abrasive
agents or cloths which will scratch the
surface.
The unit must not be sprayed with wa-
ter.

11
Registration
You can register your product using our
software service,
we will then inform you of any new
updates and other news.
You can register online on the Becker
homepage (www.becker.de).
The “Registration” menu item is located
under “Service
Repairs
The unit must not be opened if damaged.
Please contact your local stockist.
Disposal
Emissions
You will find details of emissions and
electromagnetic compatibility in "FACT
SHEET" on page 84.
Note:
The unit, including the
parts supplied with it and
the batteries and accesso-
ries, must be disposed of
correctly in accordance
with national regulations for electrical /
electronic devices. Depending on the
country to which the unit is supplied,
your local stockist may be able to accept
units.

Overview Traffic Assist Pro
12
Overview Traffic Assist Pro
Delivery contents
1 Unit holder (version without TMC does not include
TMC receiver)
2 TMC antenna (version with TMC)
3 USB connecting cable
4 SD memory card (with navigation data)
5 Traffic Assist Pro – PND (Personal Navigation Device)
6 car adapter (12-36V)
3
2
1
4
5
6

Overview Traffic Assist Pro
13
Front of the unit with control and display elements
1 Touch screen button
Press = Activates the respective button command
2 Fast access button speech command (See "Saving a
destination" on page 41)
3 Fast access button Brightness (See "Brightness" on
page 75)
4 BACK button
Press = Returns to various applications
Press and hold = Switches the Traffic Assist Pro on and
off
5 Touch screen with selected main menu
6 Fast access button map display (See "Change to map
display" on page 35)
7 Fast access button Go home (See "Navigation menu:
Home" on page 56)
8 Microphone
4001
4
5
6
37
8
2
1

Overview Traffic Assist Pro
14
Back of the unit
1 Opening for speaker
2 GPS antenna (folding)
3 Socket for external antenna (external antenna not inclu-
ded in scope of delivery)
4003
2
3
1

Overview Traffic Assist Pro
15
Left side of unit
1 SD memory card slot
2 3.5 mm socket for headphones (headphones not inclu-
ded in scope of delivery)
Right side of unit
3 USB port for data carrier containing MP3 files or
images
4 Connection for external power supply
4006
4005
1
2
3
4

Overview Traffic Assist Pro
16
Base of unit
1 Reset button
2 PC connection interface
3 Battery compartment cover
4 Screw for battery compartment cover
4002
4
2
1
3

17
General operations
Maintenance and care
The unit is maintenance-free.
For proper care, a commercially availab-
le cleansing fluid for electrical devices
may be applied using a soft damp cloth.
Your mobile navigation system was de-
signed and manufactured with great care
and should be treated with equal care.
You will enjoy your mobile navigation
system for a long time to come if you ob-
serve the recommendations listed in the
following:
• "Protect your mobile navigation sys-
tem from water and moisture. If your
unit is exposed to moisture, switch it
off immediately and disconnect the
power supply. Allow the unit to dry at
room temperature.
• Do not operate your mobile navigation
system in a dusty or dirty environment
and do not store it in such an environ-
ment.
• Do not store your mobile navigation
system in hot environments. High
temperatures can shorten the service
life of electronic components in your
unit, damage the rechargeable batte-
ries and cause certain plastics to warp
or melt.
• Do not store your mobile navigation
system in cold environments. During
operation, when the unit warms up to
operating temperature, moisture may
form internally, causing damage to
electronic components.
• Do not drop your mobile navigation
system unit, protect it from shocks and
do not shake it. Improper handling can
damage components within the unit.
• Never use corrosive or aggressive che-
micals, cleaning solutions or aggressi-
ve detergents for cleaning.
All the above information applies equal-
ly to the mobile navigation system, the
rechargeable battery, the mains charging
and car power adapters as well as all ac-
cessories. Should one of these parts not
work properly, please contact your au-
thorised dealer. He will be pleased to as-
sist.
Danger!
Danger to life by electrocution. Always
switch off the unit and disconnect the
mains power supply unit before clea-
ning the unit, supplied components, or
accessories.
Note:
Do not use any aggressive or abrasive
substances or cloths which may damage
the surface.
The unit must not be exposed to water.

18
General operations
Battery quality declaration
The capacity of the rechargeable battery
in your mobile navigation system decre-
ases with every charging/discharging
cycle. Improper storage at excessively
high or low temperatures may also cause
a gradual deterioration of capacity. Con-
sequently, the operating time may be
substantially reduced even in the case of
a fully charged battery.
The rechargeable battery is designed
such that it should certainly still be pos-
sible for it to be charged and discharged
after 6 months of operation of your mo-
bile navigation system. In the event of a
significant loss of capacity, we recom-
mend replacement of the rechargeable
battery. Please contact your authorised
dealer. Use only genuine BECKER ori-
ginal spare parts.
Display quality declaration
In some cases, for technical reasons, a
few discoloured dots (pixels) may be vi-
sible on the display. Some pixels may
also appear brighter or darker. However,
such instances do not represent a product
flaw.
Start-up
Once the Traffic Assist Pro has been un-
packed and checked for damage, the unit
can be started up. The individual start-up
stages are:
• Insert the SD memory card
• connect to power supply
• Switching on the unit
• Ensuring antenna reception (if navi-
gation is desired)
SD-Card
The card supplied with the unit has a
capacity of 2 GB and space for a set of
road maps and a limited number of MP3
files and/or images. The number of
music/image files that can be stored on
the card depends on the size of the files.
Alternatively, you can connect a USB
memory stick to the USB port to play
MP3 files or display images.
Note:
When the unit is switched on for the
first time, internal configuration takes
place. This takes several minutes. Do
not switch the unit off during this confi-
guration.
Note:
Using USB memory sticks to play MP3
files or display images may
significantly decrease the capacity of
the battery.
Note:
Using USB memory sticks (for MP3s)
may interfere with the GPS signal.
Note:
A small slider is located on one side of
the card. If it´s pushed in arrow
direction the SD-card is safed against
overwriting.
5013

19
General operations
There is a card slot on the left-hand side
of the unit. The card compartment is
equipped with a spring-actuated lock
and ejection mechanism.
Inserting the SD memory card
!Remove the SD memory card from its
packaging without touching or soiling
the contact bar.
!Hold the SD memory card such that
the contact bar faces towards the rear
of the unit.
!Insert the SD memory card into the
card slot.
!Using slight pressure, push the SD
memory card into the card slot until it
engages.
Ejecting the SD memory card
The card slot ejects the card so that you
can pull it out with two fingers.
!Gently push the SD memory card all
the way into the card slot against the
tension of the spring.
!Then release the card.
The card is ejected.
!Remove the memory card and place it
in the packaging while ensuring not to
touch contact bar.
Notes:
The memory card should only ever be
inserted and ejected when the unit is
switched off. If the unit is not switched
off, data may be lost.
Navigational operations are not possible
if the memory card containing card
data is not inserted. If you remove this
during navigation, directions to your
destination will be aborted immediately.
10129

20
General operations
Power supply
Using the battery
The integral replaceable battery supplies
power to the unit. The rechargeable bat-
tery is maintenance-free and does not re-
quire any particular care
Via the public mains grid
Connecting up to power supply
The mains charger is connected to the
public mains grid as follows:
!Hold the connector at the corrugated
grip area and push it into the
connecting socket up to the stop
without employing excessive force.
! Use the plug to insert the mains section
in the socket.
The power supply is now connected.
Removing power supply
!To remove the power supply, proceed
in reverse.
Via the vehicle battery
(cigarette lighter socket)
Connect the power supply via the
vehicle battery and the car adapter
provided as follows:
!Insert the connector on the car adapter
into the socket marked “DC 5V” on
the Traffic Assist Pro.
!Insert the adapter into the socket on
the vehicle.
Note:
First always switch off the Traffic Assist
Pro
before connecting up or removing
the power supply.
Note:
Please note that with a completely di-
scharged battery, the unit requires up to
one minute until it can be switched on
again.
Danger of Death!
Make sure that your hands are not damp
and that the mains section is dry. Only
connect the mains section to a mains
supply with which such purposes are
permitted.
Note:
Remove the mains section if you are not
planning on using the Traffic Assist Pro
for a long time.
Note:
If the cigarette lighter has just been used
and is still warm, wait until this has
cooled down in its mounting.