BeeX D2 User manual

D2
English

1. Announcements
Please keep the device away from moist and dust.
Do not put the device in high-temperature environment, especially closed car in hot weather.
Do not drop or strike the device.
Do not shake the device violently, especially the LCD Screen part. Or, it will cause abnormal
display on the screen.
Please choose proper volume when using the earphone which will be good for your ear.
Please charge the device when
(1) The power icon shows lowest power.
(2) The device is turned off automatically, and when you turn on it, it is turned off
automatically again.
(3) No response when operating the buttons.
Attention: Please use the charger offered by manufacturer to charge, other chargers may
cause damage to the device.
Do not disconnect the device from PC when downloading, uploading or formatting, or it will
cause programming errors of the device.
Do not dismounting the device privately without professional guidance.
Do not use alcohol, thinner or benzene-chemical to clean the surface of the device.
Do not use the device in forbidden place, like airplane.
Please back-upyourfilesindevice’smemoryalways.Themanufacturerisnotresponsiblefor
the clear of files after damage or repair of the device.
The manufacture reserves all right of device’s technology and design, and will have no
obligation to inform the user if there are new versions or designs been developed.
2. Announcements
The device is NOT water-proof; please keep it away from water.
The turn on time of this device is about 20 seconds; pleasedon’toperatethedevicewhenitis
turned on in 20 seconds.

3. Quick Guides
3.1 About Touch Panel
The touch screen is capacitive touch screen; you can use five fingers to touch the screen at the
same time.
3.2 Switch On/Off.
Switch On andUnlock:WhenthedeviceisintheOFFmode,pressandhold“Power”keyfor3
seconds to enter the Android startup progress bar, it need about 20 seconds enter to the system
desktop, when the LCD is under locked mode, please press and pull the icon to the green
point, then the LCD will unlocked automatically, see the figures below,
3.3 Power Saving Modes and lock screen.
Pressthe“POWER”keyshortlyafterstartingup,systementer to power save and lock mode.
Pressthe“POWER”keyortapthetouch screen, system will return to bright in 1 second
The primary operation of the device will not stop under the power save mode, just the LCD is
shut and with black screen. For example: playing music, movie, etc
Switch OFF: When the device is in the OFF mode,pressandholdthe“POWER”keyfor3
seconds, the screen will display the power off interface, choose the power off item to confirm,
the system will shut automatically
【Note】When the device with low battery it will alarm continuous and shut automatically without
charging. If the device can not start up please check if the battery is low, and try it again after the
battery is charged.

3.4 Battery management and charging.
3.4.1 Charge the battery for 8-12 hours to make sure the battery is fully charged when firstly use.
3.4.2 Insert the micro port of the battery adaptor into DC slot on the device, and connect the other
side with the power socket. Then the desktop icon of the battery keep rolling which shows it is
charging, please wait until the battery isfullycharged,don’tdisconnectthepowerwhencharging.
Once the battery is fully charged, the Icon on the desktop will stop rolling.
【Note】In order to keep the battery working in the best condition, please pay attention as below:
Pleasedon’tchargethe power in high temperature.
No need to release the power for this Li- battery, you can charge the power even there is still
some power in the battery, no need to wait it runs out.
In order to keep the battery in good condition, please make sure to charge the power once per
twoweeksifyoudon’tusethisdeviceforalongtime.
3.5 USB HOST Function
3.5.1 USB- HOST Definition
The Mini USB on the device can be used as USB Host.
3.5.2 Read U-disk:
Insert the U-disk into the HOST port, press the Resource manager in the desktop, press USB
enter into u-disk.
3.5.3 External 3G USB Dongle. (See network access guidance in item 4)
3.6 TF Card Storage
There is a TF card slot in this device, it support reading the files in TF card. Insert the TF card
into the card slot in right way, when take it out, just push the TF toward to the inside, then the
slot will release the TF card, the TF card will pop out automatically, take it then.
3.6.1 Please insert the TF into the card slot in the right side of the device.
3.6.2 Don’tpulloutthecardwhenoperating ( reading, copying), or it may cause date error.
3.6.3 Don’tusetheTFcardunderhightemperaturecondition.
3.6.4 Keep the TF card far from the liquid and erosive materials.
4. Network Access
The device support Wi-Fi network and external 3G network.

4.1 Network Access by Wi-Fi
4.1.1 Turn on Wi-Fi, and Press Wi-Fi settings. The device will scans automatically for
available Wi-Fi networks.
4.1.2 Choose the Wi-Fi network that you want to connect to.
4.1.3 Press Connect. Some network may need you input the password.
4.1.4 On the Wi-Fi settings screen, press the Menu key, touch Advanced, you will get more
settings for Wi-Fi.
4.2 Network Access by 3G
4.2.1 Turn OFF Wi-Fi if it is working.
4.2.2 Access Mobile network setting, make sure Data enabled was chosen. Then go back to
Wireless & Networks.
4.2.3 Insert External 3G by USB host.
4.2.4 Choose Mobile network, then wait for the 3G network connection, soon you can access
network via 3G..
5. Main Functions Introduction
5.1 Audio Function
Enter the music player: In music player mode, double-click the favorite in the list to play music as
shown in the following picture

Drag the playing progress bar ，to adjust the playing process.
Instructions of the buttons in the Music player
Button
Instruction
button
Instruction
Artist
Album
Song
Playing Music list
Random Play
Loop playback
Play the last song
Play the next song
Pause
Play
When no music files in the audio player playlist, the system will automatically load the music
files from the card to the audio player playlist after turning on the audio player (the device
supported audio file format: mp3, wav, midi, wma). The playlist as shown in the above figure
If two more songs in the Music playlist area, slide up/down the touch screen to page up/down
Double-click the favorite in the list to play music.
In the music playing interface, click enter the audio playing list.
Drag the playback progress bar to adjust audio playback progress.
5.2 Video Function
Click the Video player icon to enter the video player interface, open the video files,

The device supported audio file format: MKV、AV I 、RM、RMVB、MP4、MOV、VOB、
DAT、FLV、3GP、etc.
When no video files in the video player playlist, the system will automatically load the video
files from the card to the video player playlist after turning on video player.
Drag the playback progress bar to adjust video playback progress.
5.3 Picture Function
Click the HD Video Player to enter the viewing interface
Add image（supports the format of picture: BMP、JPG、JPEG、PNG、GIF）
When there is no file in the photo list, the system will automatically load the image files from the
card to the photo browsing list after opening the photo browser.
Open the corresponding folder, find the image file and add the picture you want.
Click menu button, the photo can be set as wallpaper.
5.4 Record Function
Click the record icon to enter the record interface, click record button to start
recording, click this button to stop recording, the system will remind you to use this
recording or give up, please select manually.
Recording playing: please select audio player to play the recording, firstly select the record files
from the explorer, then click it and playing, further details please refer to Audio Function.
5.5 File Manager
In file manager, you can check all files in the device, including files in built-in Memory and
external card. Also there is a quick view for pictures and videos.

5.6 E-book Function.
Support formats of E-Book: TXT、LRC、PDF、HTML、HTM、EPUB, etc.
5.7 Internet Browser
Before you use internet browse function, please make sure your network is connected. See
network access guidance in former part.
Click IE Browser icon to enter to the IE interface, click the address bar and input
website and click Go to enter a corresponding web page, you can view the corresponding
website information.
Click icon to view bookmark and history record.
Click menu icon to access settings

The device also supports other internet browsers, detail functions of those internet browsers
refer to their own instructions.
5.8 Email Function
Before you use email function, please make sure your network is connected. See network
access guidance in former part.
When you firstly use this function, you need to add an email account to the device. The device
supports several accounts working together.
Portal sites email accounts and enterprise email account adding methods are different.
Add portal sites email accounts. ( Example: Gmail, MSN, Yahoo, etc. )
Take Google email account for an example here.
Account: [email protected]
Password: *********
For portal sites email accounts, directly input your email address and password, then click
next.
After successful connection, input Account Name and Your Name. Account Name means the
name of this account in the device, Your Name means the displayed name of your email in
receivers’account.
Then you will access the account. Click email titles to read emails, long press email titles to
access options.
Click menu icon to access settings
Refresh: Checking new emails.
Compose: Write new emails.
Folders: Manage emails to different folders.
Accounts: View accounts in the device, add new accounts, delete accounts, set main account.

Accounts settings: More options for email account.
5.9Calendar
Click Calendar icon to enter calendar interface.
In calendar mode, press and pull up/down the screen to reduce/increase the Months; or to turn
the pages.
Auto adjusts Years when the month exceeds December or January.
Enter interface, the number in the orange form is the intraday date, you can change the date in
setting function; details as the setting section. .
Click to return to main menu.
5.10 Calculator Click Calculator icon to enter calculator interface.
5.11 Alarm Clock
Click Clock icon to enter time interface, then click the clock to access alarm interface, and you
can add new alarms or edit former alarms now.
Long press former alarms to choose turn alarm on/off, edit alarm, and delete alarm. Click
alarms to edit alarm.
You can edit alarms’time, repeat mode, ringtone, and lable.
In alarm interface, click menu icon to access settings. The following items
could be set.
5.12 APK Installer
This device supports the third party’s Application Package (APK format) based on Android
OS. Many Application Package can be downloaded from internet, or copied from other
devices into the storage.
If the Application Package is not downloaded from Google Android Market, you should
operate the following steps before installation. Please check Settings –Applications, make
sure Unknown sources is chosen.
Click the File Manager icon and Choose the file you want to install APK, press prompted
to install