Behringer DANALOG DDX3216 User manual

www.behringer.com
ENGLISH
Version 1.0 November 2001
TECH. SPECIFICATIONS

2
Fullyautomated32-channel16-bus24-bitdigitalmixingconsole
IState-of-the-art 32-channel 24-bit digital mixing console
I32 full-fledged channels, 12 ULN (Ultra Low-Noise) mic preamps with analog inserts and switchable phantom power
I16 busses, 8 aux sends and internal input/output patchbay for comprehensive routing options
IFully featured dynamic and snapshot automation
I17 ultra-precise, low-noise 100-mm motorized ALPS®faders
ICompressor/limiter plus gate on all 32 channels
I4-band fully parametric EQ, sweepable high-pass filter and phase reverse on all 32 channels
IAdditional delay on channels 1-16
IFour simultaneously operable effects processors with dozens of first-class algorithms, accessible from all 32 channels
IAdditional compressor/limiter (switchable pre/post) and EQ for stereo main mix
ITwo option slots, three power-packed options for unlimited connectivity (16-channel ADAT®, 16-channel TDIF, 8-channel AES/EBU)
IAnalog feel, intuitive user interface
IHigh-power floating point DSP technology (32-/40-bit) ensures virtually unlimited internal dynamic range
IUltra high-resolution 24-bit AKM®A/D and CRYSTAL®D/A converters
IFreely configurable level meters on all channels
IChannel controlllers with LED rings control any of nine parameters, selectable per channel
IFour freely assignable analog outputs on balanced 1/4" TRS connectors
ISix master controllers with comfortable push-and-turn functionality
ILarge, easy-to-read LCD display with adjustable contrast
ISynchronization via SMPTE, MTC or internal clock
IDither, word length and noise shaping adjustable for digital main outputs
IMIDI and RS232 connectors allow communication with a PC or other devices
IExtensive MIDI implementation (MMC, program changes, control changes, MIDI sysex)
IPCM/CIA card slot for saving/loading various libraries and other settings
IFree PC software for data transmission and management downloadable at www.ddx3216.com (serial cable included)
I19" rack-mounting kit included
IComprehensive Web support area with downloads, tips, application examples and more: www.ddx3216.com
IManufactured under ISO9000 certified management system

3
SPECIFICATIONS
Mono inputs 1-12
Microphone input
Type electronically balanced,
discrete input stage
Connector XLR
Gain +10 to +60 dB (PAD = -20 dB)
Inputimpedance approx. 1,5k Ω@ 1 kHz
THD+Noise 0.05 %, 20 Hz to 20 kHz, +60 dB
gain, -42 dBu at input
Max. input level +1dBu (minimum gain)
S/N ratio 95 dB, 20 Hz to 20 kHz, gain 1,
0 dBu at input
Equivalent noise -90 dB, 20 Hz to 20 kHz, input
termination: 150 Ω
Crosstalk <-85dB(channel1 againstchan-
nel2),+60dBgain,-42dBuatinput
Line input
Type electronically balanced
Connector 1/4" TRS connector
Gain -10 to +40 dB (PAD = -20 dB)
Inputimpedance approx. 16k Ω@ 1 kHz
THD+ Noise 0.02 %, 20 Hz to 20 kHz,
+20 dB gain, -20 dBu at input
Max. input level +24dBu (minimum gain)
S/N ratio 92 dB, 20 Hz to 20 kHz,
gain 1, 0 dBu at input
Equivalent noise -88 dB, 20 Hz to 20 kHz,
input termination: 150 Ω
Crosstalk <-90 dB(channel1 againstchan-
nel 2), gain 1, 0 dBu at input
Stereo inputs 13-16
Type electronically balanced
Connector 1/4" TRS connector
Gain -20 to +20 dB
Inputimpedance approx. 20k Ω@ 1 kHz
THD+ Noise 0.015 %, gain 1, 0 dB at input,
measured at main out
Max. input level +22dBu (minimum gain)
S/N ratio 86 dB, 20 Hz to 20 kHz, gain 1
(measured at main out)
Equivalent noise -85 dB, 20 Hz to 20 kHz,
(measured at main out) input termination: 150 Ω
Crosstalk <-85dB(channel13againstchan-
(measured at main out) nel 14), gain 1, 0 dBu at input
Main outputs
Type servo-balanced
Connector XLR
Output impedance approx. 160 Ω@ 1 kHz
Max. output level +16 dBu
Multi outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω@ 1 kHz
Max. output level +16 dBu
Control Room outputs
Type servo-balanced
Connector 1/4" TRS connector
Output impedance approx. 160 Ω@ 1 kHz
Max. output level +16 dBu
S/PDIF digital input/output
Input Connector RCA
Special feature Sample rate converter
(32 to 50 kHz)
Output Connector RCA
Dither 16, 20 and 24 bits
Special feature Noise shaping
Wordclock input/output
Input Connector BNC
Inputimpedance 20 kΩ
Output Connector BNC
Output impedance 30 Ω
Signal type TTL level square wave
SMPTE input
Connector XLR
Inputimpedance 20k Ω
RS232 port
Connector 9-pinDIN jack
Transmission 115,200 bauds, 8 data bits,
1 stop bit, no parity
System specifications
Samplingrate 44.1 and 48 kHz
(internal and external)
Signal delay <1.6ms at 48 kHz, channel input
against main out
Frequency response 20 Hz to 20 kHz, +/- 0.1 dB
Faders
Type 100-mm ALPS®motorized faders
Resolution +12 from 0 to -oodB
(256 increments)
Converters
A/D converters
Resolution 24-bit delta-sigma AKM®
Oversampling 128 times
Dynamic range 116 dB typ.
D/A converters
Resolution 24-bit delta-sigma CRYSTAL®
Oversampling 128 times
Dynamic range 106 dB typ.
MIDI interface
Type 5-pin DIN jacks
Connectors MIDIIN,MIDITHRUandMIDIOUT
Level meters
Channel 16-digit LED display
Main 2 x 16-digit LED display
Special feature Peak-hold function
(off, 0-29 s, and oo)
Mono inputs 1-12, microphone (minimumgain)
SigLED -46 dBu at input
ClipLED 0 dBu at input
Mono inputs 1-12, line (minimumgain)
SigLED -25 dBu at input
ClipLED +23 dBu at input
Stereo inputs 13-16 (gain at center position)
SigLED -36 dBu at input
ClipLED +10 dBu at input
Accessories
ADT1616 16(2x8)inputsand16(2x8)output,
ADAT®digital interface (optical)
TDIF1616 16(2x8)inputsand16(2x8)outputs,
TDIFdigitalinterface(25-pinD-Sub)
AES808 8inputs and 8 outputs,AES/EBU
digital interface (25-pin D-Sub)
ACB808P 19" interface box for AES808, with
4xXLRinputsand4xXLRoutputs
Power supply
Power consumption approx. 68 W
Fuse 100 to 240 V ~: T 4 A H
Mains connector Standard IEC receptacle
Physical
Dimensions (H * W * D) approx. 6 ½" x 17 ¼" x 22 ½"
(163 mm x 438 mm x 572 mm)
Weight (net) approx. 29 ¾" lbs (13.5 kg)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.

The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or transmitted in any form
or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written
permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER is a registered trademarks. ALL RIGHTS RESERVED.
AKM, ALESIS, ALPS, ANALOG DEVICES, CRYSTAL, TASCAM, WINDOWS, ADAT, DTRSand SHARCare all registered
trademarks of their respective owners, which are in no way associated or affiliated with BEHRINGER.
© 2001 BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
Tel. [phone] / 92 06-0, Fax [phone] / 92 06-30
4