Behringer Digital Multi-FX FX600 User manual

FX Function PAR 1 control
Chorus Eects speed
Flanger Eects speed
Phaser Eects speed
Delay Delay time
Tremolo Eects speed
Pitch Shifter Detune
(slight shifting for fatter sound)
FX Function PAR 2 control
Chorus Eects depth
Flanger Eects depth
Phaser Eects depth
Delay Delay feedback
Tremolo Shape (LFO waveform)
Pitch Shifter Semi tone (pitch interval)
DIGITAL MULTI-FX FX600
Digital Stereo Multi-Eects Pedal
Thank you for showing your condence in us by purchasing the BEHRINGER DIGITAL MULTI-FX FX600.
This ultimate digital multi-eects pedal delivers 24-bit high-resolution stereo eects including Flanger,
Chorus, Phaser, Delay, Tremolo and Pitch Shifter. Thanks to its extensive tone control plus additional multi-
functional parameter adjustment you’ll have plenty of cool sounds at your disposal to handle every situation.
1. Controls
(1) The LEVEL control adjusts the output level.
(2) and (3) The PAR 1 and 2controls have dierent functions depending on the chosen eect.
(1) (4)
(6)
(8) (7)
(5)
(2) (3)
(4) The FX control lets you chose between six dierent modulation eects:
CHORUS: This eect slightly detunes the original signal. A very pleasant detune eect is created in
connection with the pitch variation.
FLANGER: Originally, the anger eect was generated with two tape recorders running
synchronously. The same audio signal was recorded on both machines. If you put a nger on
the left spool of one of the machines, the spool and the playback speed are slowed down.
The generated delay results in phase shifting of the signals.
PHASER: With the phaser, a second, phase-shifted signal is added to the original audio signal.
The resulting sound is thicker and above all livelier.
PITCH SHIFTER: The pitch shifter slightly detunes the audio signal.
TREMOLO: The tremolo eect is achieved by periodic modulation of the input signal level. This results
in a continuous change from low to high level that lends a quivering, tremulous sound character.
DELAY: A delay of the input signal with various repetitions.
(5) The ON/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.
(6) Use the footswitch to activate/deactivate the eect.
(7) Use the two ¼" TS connectors IN A and IN B to plug in a stereo input signal. For mono use just
plug in IN A.

DIGITAL MULTI-FX FX600
MUSIC Tribe accepts no liability for any loss which may be suered by any person who relies either wholly or in part upon any description,
photograph, or statement contained herein.Technical specications, appearances and other information are subject to change
without notice. All trademarks are the property of their respective owners. MIDAS, KLARKTEKNIK, LAB GRUPPEN, LAKE, TANNOY,
TURBOSOUND, TC ELECTRONIC, TC HELICON, BEHRINGER, BUGERA and COOLAUDIO are trademarks or registered trademarks of
MUSIC Tribe Global Brands Ltd. © MUSIC Tribe Global Brands Ltd. 2018 All rights reserved.
(8) The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if
you want to achieve full stereo eect. For mono use just plug in OUT A.
Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V
battery, press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.
◊ The FX600 has no on/o switch. As soon as you insert the jack into the in connector,
the FX600 begins running. When not using the FX600, remove the jack from the in
connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
In A
Connector ¼" TS
Impedance 500 kΩ
Impedance mono 250 kΩ
In B
Connector ¼" TS
Impedance 500 kΩ
Out A
Connector ¼" TS
Impedance 1 kΩ
Out B
Connector ¼" TS
Impedance 1 kΩ
Power Supply
9 V𝌂, 1.7 A regulated
BEHRINGER PSU-HSB ALL
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
U.K./Australia 240 V~, 50 Hz
Europe 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 130 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.