3
ULTRABASS BX4210A
SPECIFICATIONS
AUDIO INPUTS
Active instrument input 1/4" TS connector, unbalanced
Input impedance approx. 220 kW unbalanced
Passive instrument input 1/4" TS connector, unbalanced
Input impedance approx. 750 kW unbalanced
Return 1/4" TS connector, unbalanced
Input impedance approx. 10 kW unbalanced
AUDIO OUTPUTS
Send/Tuner 1/4" TS connector, unbalanced
Output impedance min. 2.2 kW unbalanced
Line Out 1/4" TS connector, unbalanced
Output impedance approx. 100 W unbalanced
Output level max. +4 dBu
D.I. output XLR connector, servo-balanced
Output impedance approx. 100 W balanced
Output level max. -10 dBu
Loudspeaker connectors 1/4" TS connector, unbalanced
professional connector
(compatible to Neutrik® Speakon®)
Load impedance min. 4 W
SYSTEM SPECIFICATIONS
Po er amp output 450 Watts into 4 W
SPEAKERS
High-po er bass speakers 2 x 10" BUGERATM
Aluminum cone speakers
Sensitivity 93 dB @ 1 W / 1 m
SPL max. 120 dB
Impedance 2 x 4 W
Frequency response 42 Hz - 16 kHz
Po er (program) 500 W
T eeter 1" t eeter driver
POWER SUPPLY
Mains voltages U.S./Canada
120 V~, 60 Hz, 6 A
China/Korea
220 V~, 50 Hz, 3 A
Europe/U.K./Australia
230 V~, 50 Hz, 3 A
Japan
100 V~, 50/60 Hz, 6 A
General export model
120/230 V~, 50 - 60 Hz
Fuse 100 - 120 V~: T 10 A H 250 V
220 - 240 V~: T 6.3 A H 250 V
Mains connection Standard IEC receptacle
PHYSICAL/WEIGHT
Dimensions (H x W x D) approx. 24 7/10" (627 mm)
x 26 1/2" (674 mm)
x 14 3/5" (370 mm)
Weight approx. 39 kg (86 lbs)
BEHRINGER constantly strives to maintain the highest quality standards. Modifi-
cations may be made if necessary without prior notice. The specifications and appearance
of the equipment may therefore differ from those listed or illustrated.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time of printing. The names
of companies, institutions or publications pictured or mentioned and their respective logos are registered trademarks of their respective owners. Their use
neither constitutes a claim of the trademarks by BEHR NGER nor affiliation of the trademark owners with BEHR NGER. BEHR NGER accepts no
liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained
herein. Colours and specification may vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not
agents of BEHR NGER and have absolutely no authority to bind BEHR NGER by any express or implied undertaking or representation. No part of this
manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for
any purpose, without the express written permission of BEHR NGER nternational GmbH. BEHR NGER® is a registered trademark.
ALL R GHTS RESERVED. © 2005 BEHR NGER nternational GmbH,
Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide , Germany.
Tel. +49 2154 9206 0, Fax +49 2154 9206 4903
