
15 / 28 EN
Refrigerator / User Guide
Using the product
freezing button ( ) for 3 seconds. In the closed
mode, the handle light is only activated when the
appliance door is opened and it goes out after a
while after the door is closed. In the open mode,
the handle light is activated when the appliance
door is opened, the handle light stays on dimly
after a while after the door is closed. The handle
light function is set to the ex-factory closed mode.
3. Fault Condition Indicator
This indicator ( ) shall be active when your
refrigerator cannot perform adequate cooling or in
case of any sensor error. “E” shall be displayed on
the Freezing Compartment temperature indicator
and figures such as 1,2,3... shall be displayed on the
cooling compartment temperature indicator. These
figures provide information to the authorized service
on the error that has occurred.
Exclamation mark may be displayed when you load
warm food to the freezing compartment or keep the
door open for a long period of time. This is not a fault,
this warning shall be removed when the food is cooled
down or when any key is pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled automatically and
the energy saving symbol ( ) is displayed when
the door of the product is not opened or closed for
some period of time. When the energy saving function
is active, all symbols on the screen other than the
energy saving symbol shall be turned off. When the
energy-saving function is active, pressing any key or
opening the door will deactivate the energy-saving
function and the display signals will return to normal.
The energy-saving function is a function activated
ex-factory and cannot be cancelled.
5. Freezing Compartment Temperature Setting
Key
Temperature setting is made for cooler compartment.
Pressing this key will enable the freezer compartment
temperature to be set at -15,-16,-18,-19,-20,-22,-
24 Celcius.
6. Compartment Conversion Key
When the compartment conversion key is pressed for
3 seconds, freezer compartment switches between
cooler, off, and freezer modes respectively. When it is
operated as cooling compartment, the temperature
of the compartment may be set at 8,7,6,5,4,3,2
and 1 Celcius. In case of OFF mode, compartment
temperature indicator shall display “- -”.
7. Cooling Compartment Temperature Setting
Key
Allows setting of temperature for cooler compartment.
Pressing this key will enable the cooling compartment
temperature to be set at 8,7,6,5,4,3,2 and 1 Celcius.
8. Cooling Compartment OFF (Vacation)
Function Key
Press the key for 3 seconds to activate the vacation
function. Vacation mode is activated and the LED
on the key is illuminated. “- -” shall be displayed on
the Cooling Compartment temperature indicator and
the cooling compartment does not actively perform
cooling. You shall not keep your food in the cooling
compartment when this function is activated. The
other compartments continue to cool according to the
set temperatures. Press the key for 3 seconds again
to cancel this function.
9. Wireless Key
This key is used to make a wireless connection with
your product via HomeWhiz mobile app.
When the key is pressed for a long period (3
seconds), the wireless connection symbol on the
display/screen flashes slowly (with intervals of 0.5
seconds). The home network is initialized on the
product this way.
After achieving wireless connection with the product,
wireless connection symbol ( ) illuminates
continuously.
When the initial connection is established, you may
activate/deactivate the connection with a short
press on this key. The wireless connection symbol
shall flash quickly (at 0.2 second intervals) until the
connection is established. When the connection is
active, the wireless network symbol shall light up
continuously.