Beko WEY104064TW User manual

Washing Machine
User Manual
WEY104064TW
2820529135_EN/ 05-11-20.(21:03)
Document Number :

2 / EN Washing Machine / User’s Manual
This product was manufactured using the latest technology in environmentally friendly conditions.
1 General safety instructions
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 Life and property safety
uNever place the product on a carpet-covered floor. Otherwise, lack of airflow
beneath the machine will cause electrical parts to overheat. This will cause
problems with your product.
uUnplug the product when it is not in use.
uAlways have the installation and repairing procedures carried out by the
Authorised Service Agent. The manufacturer shall not be held liable for
damages that may arise from procedures carried out by unauthorised
persons.
uThe water supply and draining hoses must be securely fastened and remain
undamaged. Otherwise, there is the risk of water leakage.
uNever open the loading door or remove the filter while there is still water in
the drum. Otherwise, risk of flooding and injury from hot water will occur.
uDo not force open the locked loading door. The door will open immediately
after the washing cycle has ended. If the door does not open, apply the
solutions provided for "Loading door cannot be opened." error in the
Troubleshooting section. In case of forcing the loading door to open, the
door and the lock mechanism may get damaged.
uUse detergents, softeners and supplements suitable for automatic washing
machines only.
uFollow the instructions on the textile tags and on the detergent package.
uLaundry that is previously washed, cleaned, soiled or stained with petrol /
gasoline, dry cleaning solvents or other flammable or explosive substances
must not be dried in the machine as they give out flammable or explosive
steam. For this reason, they must not be used in the Refresh programme or
in the Wash&Wear auxiliary function selection. It may cause fire risk.

3 / EN
Washing Machine / User’s Manual
This product was manufactured using the latest technology in environmentally friendly conditions.
uLaundry stained with Liquid cooking oil, acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes and wax removers must be washed in hot
water with plenty of detergent beforehand. After the washing programme,
it can be used in the Refresh programme or in the Wash&Wear auxiliary
function selection.
uFoam rubber (latex foam), shower caps, waterproof textiles, clothes or
pillows with rubber support or rubber foam pads must not be used in the
Wash&Wear auxiliary programme selection or in the Refresh programme. It
may cause fire risk.
uIf you use washing ball, detergent scale, laundry clothing cages and balls
in your machine, they can melt during drying. Do not use it in the Refresh
programme or in the Wash&Wear auxiliary function selection. It may cause
fire risk.
uIf you are using industrial chemicals for cleaning, never use the Refresh
programme or the Wash&Wear auxiliary programme. It may cause fire risk.
uDo not touch loading door glass with bare hands after drying. There is the
risk of getting burnt.
uIn the Refresh programme and the Wash&Wear auxiliary programme
selection, there is a cooling process as the final step to make sure that the
laundry remains at a temperature that will not harm the user. You may be
exposed to hot steam if you open the door before cooling is complete. There
is the risk of scalding.
uIf the programme is interrupted (programme cancellation or power failure)
during the Refresh programme or the Wash&Wear auxiliary function
selection, the laundry in the machine may be hot. Be careful.
uDuring the Refresh programme or the Wash&Wear auxiliary programme
selection, do not stop the machine before these steps are complete. If you
have to stop the machine, remove all laundry and lay them in a suitable
place to let them cool down.
uYour product is suitable to operate in ambient temperatures between 0OC
and +35OC.
uAmbient temperatures between 15OC and +25OC are ideal temperatures for
your product.
uDo not let pets enter the product. Check inside the product before using.
uDo not operate the Refresh programme and the Wash&Wear programme
after overloading the machine. Observe the maximum load levels specified.

4 / EN Washing Machine / User’s Manual
uLeather laundry and laundry that contains leather must not be used in
the Refresh programme and the Wash&Wear auxiliary function selection.
Leather parts give away colour.
uIn failures that cannot be repaired using information given in safety
instructions, turn off the machine, unplug the power cable and call the
Authorised Service Agent.
uThe machine must not be used only in the Refresh programme for a long
time. If it is being used only in the said programme for a long time, it must
be operated unloaded in one of the short washing programmes after every
15 cycles.
uCheck all clothes before loading them into the machine and ensure that
they do not have objects such as lighters, coins, metal pieces, needles in
the pockets or inside.
uUnderwear with metal attachments must not be used in the Refresh
programme and the Wash&Wear auxiliary function selection. Metal supports
might come off during drying and cause damage in the machine.
uLarge laundry such as tulles, rugs, blankets, duvets etc. must not be used
in the Refresh programme and the Wash&Wear auxiliary function selection.
Your laundry might get damaged.
uDo not use fabric softeners or static preventers in the machine unless
recommended by the manufacturer.
uProducts such as fabric softeners must be used in accordance with
manufacturer's instructions.
uDelicate laundry that contains silk, wool etc. must not be used in the
Refresh programme and the Wash&Wear auxiliary function selection.
Otherwise, wool clothes may get shrunken and other sensitive clothes may
get damaged.
uCheck symbols on the garment tag before starting the programmes.
1.2 Children's safety
uThis product can be used by children at and above 8 years old and by persons
whose physical, sensory or mental capabilities were not fully developed or
who lack experience and knowledge provided that they are supervised or
trained on the safe usage of the product and the risks it brings out. Children
should not play with the product. Cleaning and maintenance works should
not be performed by children unless they are supervised by someone.
Children under the age of 3 should be kept away unless continuously
supervised.
uPackaging materials are dangerous to children. Keep packaging materials
in a safe place away from reach of the children.

5 / EN
Washing Machine / User’s Manual
uElectrical products are dangerous for the children. Keep children away from
the product when it is in use. Do not allow them to play with the product.
Use child lock to prevent children from intervening with the product.
uDo not forget to close the loading door when leaving the room where the
product is located.
uStore all detergents and additives in a safe place away from the reach of
the children by closing the cover of the detergent container or sealing the
detergent package.
1.3 Electrical safety
uIf the product has a failure, it should not be operated unless it is repaired by
the Authorised Service Agent. There is risk of electric shock!
uThis product is designed to resume operating in the event of powering
on after a power interruption. If you wish to cancel the programme, see
"Cancelling the programme" section.
uConnect the product to a grounded outlet protected by a 13 A fuse. Do not
neglect to have the grounding installation made by a qualified electrician.
Our company shall not be liable for any damages that may arise when the
product is used without grounding in accordance with the local regulations.
uNever wash the product by spreading or pouring water onto it! There is risk
of electric shock!
uNever touch the power cable plug with wet hands! Never unplug by pulling
on the cable. Always press on the plug with one hand and pull out the plug
by grabbing with the other hand.
uProduct should be unplugged during installation, maintenance, cleaning
and repair procedures.
uIf the power cable is damaged, it must be replaced by the manufacturer,
authorized service or a similarly qualified person (preferably an electrician)
or someone designated by the importer in order to avoid possible risks.
1.4 Hot surface safety
The glass of the loading door gets too hot while
washing at higher temperatures. Therefore,
especially do not allow children touch the
loading door glass while washing.