Beko WTV 7531 X0 User manual

2820524681_EN / 18-06-16.(15:27)
Washing Machine
User’s Manual
WTV 7531 X0
EN / BG / SL
Document Number=
Пральна машина
Посібник користувача
Pralni stroj
Navodila za uporabo

This product was manufactured using the latest technology in environmentally friendly conditions.
1 Important instructions for safety and environment
This section contains safety instructions that will help protect from risk of personal injury or
property damage. Failure to follow these instructions shall void any warranty.
1.1 General safety
• This product can be used by children at and above 8 years old and by persons whose phy-
sical, sensory or mental capabilities were not fully developed or who lack experience and
knowledge provided that they are supervised or trained on the safe usage of the product
and the risks it brings out. Children must not play with the product. Cleaning and mainte-
nance works should not be performed by children unless they are supervised by someone.
Children of less than 3 years should be kept away unless continuously supervised.
• Never place the product on a carpet-covered floor. Otherwise, lack of airflow beneath the
machine will cause electrical parts to overheat. This will cause problems with your product.
• If the product has a failure, it should not be operated unless it is repaired by the Authorized
Service Agent. There is the risk of electric shock!
• This product is designed to resume operating in the event of powering on after a power in-
terruption. If you wish to cancel the programme, see "Cancelling the programme" section.
• Connect the product to a grounded outlet protected by a 16 A fuse. Do not neglect to have
the grounding installation made by a qualified electrician. Our company shall not be liable
for any damages that will arise when the product is used without grounding in accordance
with the local regulations.
• The water supply and draining hoses must be securely fastened and remain undamaged.
Otherwise, there is the risk of water leakage.
• Never open the loading door or remove the filter while there is still water in the drum.
Otherwise, risk of flooding and injury from hot water will occur.
• Do not force open the locked loading door. The loading door will be ready to open just a
few minutes after the washing cycle comes to an end. In case of forcing the loading door to
open, the door and the lock mechanism may get damaged.
• Unplug the product when not in use.
• Never wash the product by spreading or pouring water onto it! There is the risk of electric
shock!
• Never touch the plug with wet hands! Never unplug by pulling on the cable, always pull out
by grabbing the plug.
• Use detergents, softeners and supplements suitable for automatic washing machines only.
• Follow the instructions on the textile tags and on the detergent package.
• The product must be unplugged during installation, maintenance, cleaning and repairing
procedures.
• Always have the installation and repairing procedures carried out by the Authorized Service
Agent. Manufacturer shall not be held liable for damages that may arise from procedures
carried out by unauthorized persons.

3/ EN
Washing Machine / User’s Manual
• If the power cable is damaged, it must be replaced by the manufacturer, after sales service
or a similarly qualified person (preferably an electrician) or someone designated by the im-
porter in order to avoid possible risks.
• Place the product on a rigid, flat and level surface.
• Do not place it on a long-pile rug or similar surfaces.
• Do not place the product on a high platform or near the edge on a cascaded surface.
• Do not place the product on the power cable.
• Never use sponge or scrub materials. These will damage the painted, chrome plated and
plastic surfaces.
1.2 Intended use
• This product has been designed for domestic use. It is not suitable for commercial use and
it must not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are marked accor-
dingly.
• The manufacturer waives any responsibility arisen from incorrect usage or transportation.
1.3 Children's safety
• Packaging materials are dangerous to children. Keep packaging materials in a safe place
away from reach of the children.
• Electrical products are dangerous for the children. Keep children away from the product
when it is in use. Do not let them to tamper with the product. Use child lock to prevent chil-
dren from intervening with the product.
• Do not forget to close the loading door when leaving the room where the product is loca-
ted.
• Store all detergents and additives in a safe place away from the reach of the children by
closing the cover of the detergent container or sealing the detergent package.
While washing the laundry at high temperatures, the loading door glass
becomes hot. Therefore, keep especially the children away from the loading
door of the machine while the washing operation is in progress.
1.4 Package information
• Packaging materials of the product are manufactured from recyclable materials in ac-
cordance with our National Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take them to the packaging material
collection points designated by the local authorities.
1.5 Disposing of the waste product
• This product has been manufactured with high quality parts and materials which can be
reused and are suitable for recycling. Therefore, do not dispose the product with normal
domestic waste at the end of its service life. Take it to a collection point for the recycling of
electrical and electronic equipment. Please consult your local authorities to learn the nea-
rest collection point. Help protect the environment and natural resources by recycling used
products. For children's safety, cut the power cable and break the locking mechanism of
the loading door so that it will be non-functional before disposing of the product.

4/ EN
Washing Machine / User’s Manual
1.6 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This
product bears a classification symbol for waste electrical and electro-
nic equipment (WEEE).
This product has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Do not
dispose of the waste product with normal domestic and other wastes
at the end of its service life. Take it to the collection center for the
recycling of electrical and electronic equipment. Please consult your
local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive
(2011/65/EU). It does not contain harmful and prohibited materials
specified in the Directive.

5/ EN
Washing Machine / User’s Manual
2 Installation
Refer to the nearest Authorised Service Agent for installation of the
product. To make the product ready for use, review the information
in the user manual and make sure that the electricity, tap water
supply and water drainage systems are appropriate before calling the
Authorized Service Agent. If they are not, call a qualified technician
and plumber to have any necessary arrangements carried out.
C
NOTE : Preparation of the location and electrical, tap water
and waste water installations at the place of installation is
under customer's responsibility.
NOTE : Make sure that the water inlet and discharge hoses
as well as the power cable are not folded, pinched or crushed
while pushing the product into its place after installation or
cleaning procedures.
BDANGER: Installation and electrical connections of the
product must be carried out by the Authorized Service Agent.
Manufacturer shall not be held liable for damages that may
arise from procedures carried out by unauthorized persons.
ACAUTION:Prior to installation, visually check if the product
has any defects on it. If so, do not have it installed. Damaged
products cause risks for your safety.
2.1 Appropriate installation location
• Place the machine on a rigid floor. Do not place it on a long pile
rug or similar surfaces.
• Total weight of the washing machine and the dryer -with full load-
when they are placed on top of each other reaches to approx.
180 kilograms. Place the product on a solid and flat floor that has
sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product at places where temperature may fall
below 0ºC.
• Place the product at least 1 cm away from the edges of other
furniture.
2.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement.
Remove the packaging reinforcement by pulling the ribbon.
2.3 Removing the transportation locks
AWARNING: Do not remove the transportation locks before
taking out the packaging reinforcement.
WARNING: Remove the transportation safety bolts before
operating the washing machine! Otherwise, the product will
be damaged.
1. Loosen all the bolts with a suitable spanner until they rotate freely
(C).
2. Remove transportation safety bolts by turning them gently.
3. Attach the plastic covers supplied in the User Manual bag into the
holes on the rear panel. (P)
CNOTE : Keep the transportation safety bolts in a safe place
to reuse when the washing machine needs to be moved again
in the future.
NOTE : Never move the product without the transportation
safety bolts properly fixed in place!
2.4 Connecting water supply
C
NOTE : The water supply pressure required to run the product
is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have
10 – 80 liters of water flowing from the fully open tap in one
minute to have your machine run smoothly. Attach a pressure
reducing valve if water pressure is higher.
AWARNING: Models with a single water inlet should not be
connected to the hot water tap. In such a case the laundry will
get damaged or the product will switch to protection mode and
will not operate.
WARNING: Do not use old or used water inlet hoses on the
new product. It may cause stains on your laundry.
1. Tighten all hose nuts by hand. Never use a tool when tightening
the nuts.