Bernette b79 User manual

User Manual

Table of Contents
2022-08 EN 5020079.40A.04 3
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS .................. 7
Important Information ........................................ 10
1 My bernette ......................................................... 12
1.1 Overview Machine .................................................. 12
Overview Front Controls .............................................. 12
Overview - Front ......................................................... 15
Overview Top .............................................................. 16
Overview - Back Panel ................................................. 16
1.2 Accessory ............................................................... 17
Supplied Accessories ................................................... 17
Overview Presser Feet .................................................. 18
1.3 Overview User Interface .......................................... 19
Overview System Settings ............................................ 19
Overview Functions/Visual Information ........................ 20
Overview Functions and Views .................................... 20
1.4 Needle, Thread, Fabric ............................................ 21
Overview Needles ........................................................ 21
Example for Needle Description ................................... 24
Thread Selection ......................................................... 24
Needle/Thread Combination ........................................ 25
2 Sewing Preparation ............................................. 26
2.1 Connection and Switching On ................................ 26
Connecting the Machine ............................................. 26
Connecting the Foot Control ....................................... 26
Attaching the Knee Lifter of the Free Hand System ...... 27
Switching the Machine On .......................................... 27
Fixing the Touch Screen Pen ........................................ 27
Regulating the Speed via the Foot Control .................. 28
Raising/Lowering the Needle ....................................... 28
Programming the Foot Control Individually .................. 28
2.2 Spool Pin ................................................................ 28
Horizontal Spool Pin .................................................... 28
Second Spool Pin ........................................................ 29
2.3 Freearm .................................................................. 30
2.4 Sewing Table and Accessory Box ............................. 30
2.5 Raising or Lowering the Feed Dog ........................... 31
2.6 Using the Slide-on Table ......................................... 31
2.7 Presser Foot ............................................................ 32
Adjusting the Presser Foot Position via the Knee Lifter
of the Free Hand System ............................................. 32
Changing the Presser Foot .......................................... 32
Having the presser foot sole displayed in the user
interface ..................................................................... 33
Setting the Presser Foot Pressure ................................ 34
2.8 Needle and Stitch Plate .......................................... 34
Changing the Needle .................................................. 34
Selecting the Needle in the User Interface ................... 35
Needle Stop Up/Down (Permanent) ............................ 35
Changing the Stitch Plate ........................................... 35
Checking the Stitch Plate in the User Interface ............ 36
2.9 Threading .............................................................. 37
Preparing the Threading ............................................. 37
Threading the Upper Thread ....................................... 37
Threading the Twin Needle ......................................... 40
Winding the Bobbin Thread ........................................ 42
Threading the Bobbin Thread ..................................... 44
3 Setup Program .................................................... 46
3.1 Sewing Settings ..................................................... 46
Adjusting the Upper Thread Tension ........................... 46
Adjusting the Maximum Sewing Speed ....................... 46
Programming Securing Stitches .................................. 46
Adjusting the Hovering Height of the Presser Foot ...... 47
Programming the Button «Securing» .......................... 47
Programming the Button «Thread Cutter» .................. 48
Adjusting the Presser Foot Position with Needle Stop
Down ......................................................................... 48
Programming the Button «Quick Reverse» .................. 49
Programming the "Needle Up/Down" Button ............. 49
Programming the Foot Control Individually ................. 50
Fabric Thickness Measurement ................................... 50
Adjusting the General Balance .................................... 51
3.2 Embroidery Settings ............................................... 51
Adjusting the Upper Thread Tension ........................... 51
Adjusting the Maximum Embroidering Speed ............. 51
Calibrating the Embroidery Hoop ................................ 52
Deactivating Securing Stitches .................................... 52
Adjusting the Thread Cut ........................................... 53
Adjusting the Height of the Embroidery Presser Foot .. 53
3.3 Selecting Personal Settings ..................................... 54
3.4 Monitoring Functions ............................................. 54
Activating the Upper Thread Indicator ........................ 54
Activating the Bobbin Thread Indicator ....................... 54
3.5 Sound On/Off ........................................................ 55

Table of Contents
42022-08 EN 5020079.40A.04
3.6 Machine Settings .................................................... 55
Adjusting the Brightness of the Display ....................... 55
Adjusting the Sewing Light ......................................... 55
Calibrating the Display ................................................ 56
Back to Basic Setting ................................................... 56
Updating the Machine Firmware ................................. 56
Checking the Firmware Version ................................... 57
Reviewing the Total Number of Stitches ...................... 57
Selecting a Language .................................................. 58
4 System Settings ................................................... 59
4.1 Calling Up the Tutorial ............................................ 59
4.2 Using eco Mode ..................................................... 59
4.3 Calling up the Creative Consultant ......................... 60
4.4 Cancelling Any Alterations with «clr» ..................... 61
5 Creative Sewing ................................................... 62
5.1 Overview Selection Menu Sewing ........................... 62
Selecting a Stitch Pattern ............................................. 62
5.2 Dual feed ................................................................ 63
Application of the Dual Feed ....................................... 63
Use the Dual Feed ....................................................... 63
5.3 Regulating the Speed .............................................. 64
5.4 Adjusting the Upper Thread Tension ....................... 64
5.5 Editing Stitch Patterns ............................................. 64
Changing the Stitch Width .......................................... 64
Changing the Stitch Length ......................................... 65
Correcting the Balance ................................................ 65
Programming Pattern Repeat ...................................... 66
Mirror Image of Stitch Patterns .................................... 66
Edit Stitch Pattern Length ............................................ 66
Permanent Quick Reverse ............................................ 67
Backstepping .............................................................. 67
5.6 Combining stitch patterns ....................................... 68
Overview Combi Mode ............................................... 68
Creating Stitch Pattern Combinations .......................... 68
Editing a Single Stitch Pattern ...................................... 69
Deleting a Single Stitch Pattern ................................... 69
Adding a Single Stitch Pattern ..................................... 70
Mirroring a Stitch Pattern Combination ....................... 70
Programming Pattern Repeat ...................................... 70
Securing a Stitch Pattern Combination ........................ 71
Saving a Stitch Pattern Combination ........................... 71
Loading a Stitch Pattern Combination ......................... 71
Overwriting a Stitch Pattern Combination ................... 72
Deleting a Stitch Pattern Combination ......................... 72
5.7 Administering Stitch Patterns .................................. 72
Saving Stitch Patterns in Personal Memory .................. 72
Overwriting Stitch Patterns from the Personal Memory 72
Loading Stitch Patterns from the Personal Memory ..... 73
Deleting Stitch Patterns from the Personal Memory .... 73
6 Practical Stitches ................................................. 74
6.1 Overview Practical Stitches ..................................... 74
6.2 Sewing Straight Stitch ............................................ 76
6.3 Securing with the Automatic Securing Program ..... 76
6.4 Sewing in the Zipper .............................................. 77
6.5 Sewing Triple Straight Stitch .................................. 78
6.6 Sewing Triple Zigzag .............................................. 78
6.7 Manual Darning ..................................................... 79
6.8 Reinforced Darning, Automatic .............................. 79
6.9 Finishing Edges ...................................................... 81
6.10 Sewing Double Overlock ........................................ 82
6.11 Sewing Vari Overlock ............................................. 82
6.12 Edgestitching Using the Seam Guide ...................... 82
6.13 Sewing a Narrow Hem ........................................... 83
6.14 Sewing Blind Hems ................................................ 84
6.15 Sewing Visible Hems .............................................. 85
6.16 Sewing Basting Stitches ......................................... 85
6.17 Sew Thick Areas .................................................... 86
6.18 Sewing Corners ..................................................... 86
7 Decorative Stitches ............................................. 87
7.1 Overview Decorative Stitches ................................. 87
7.2 Altering the Stitch Density ..................................... 88
7.3 Sewing Cross Stitches ............................................ 88
8 Alphabets ............................................................ 89
8.1 Overview Alphabet ................................................ 89
8.2 Creating Lettering .................................................. 89
9 Buttonholes ......................................................... 91
9.1 Overview Buttonholes ............................................ 91
9.2 Marking Buttonholes ............................................. 92
9.3 Sewing a Buttonhole Automatically ....................... 93
9.4 Reinforce Buttonhole ............................................. 95
9.5 Sewing On Buttons ................................................ 96
9.6 Sewing Eyelets ....................................................... 97

Table of Contents
2022-08 EN 5020079.40A.04 5
10 Quilting ................................................................. 98
10.1 Overview Quilt Stitches ........................................... 98
10.2 Quilting, Securing Program ..................................... 99
10.3 Sewing Hand-look Quilt Stitches ............................. 99
10.4 Guiding the Quilt Work Freely ................................. 100
11 Stitch Designer ..................................................... 101
11.1 Overview Stitch Designer ........................................ 101
11.2 Creating your Own Stitch Pattern ........................... 101
Creating Stitch Designs Using Screen Dots .................. 102
Free hand drawing ...................................................... 102
11.3 Editing the View ..................................................... 102
11.4 Inserting Points ....................................................... 102
11.5 Relocating the Points .............................................. 103
11.6 Duplicating Points ................................................... 103
11.7 Deleting Points ....................................................... 103
11.8 Activating the Triple Stitch ...................................... 104
12 My bernette Embroidery ..................................... 105
12.1 Overview Embroidery Module ................................. 105
12.2 Overview User Interface .......................................... 106
Overview Functions/Visual Information ........................ 106
Overview System Settings ............................................ 106
Overview Selection Menu Embroidery ......................... 107
12.3 Important Embroidery Information .......................... 107
Upper Thread .............................................................. 107
Bobbin Thread ............................................................ 108
Choosing the Embroidery Design ................................ 108
Embroidery Test .......................................................... 108
Embroidering Designs by Third-party Providers ............ 108
Underlay Stitches ........................................................ 108
The Size of the Embroidery Design .............................. 109
Satin or Leaf Stich ....................................................... 109
Step Stitch .................................................................. 109
Connecting Stitches .................................................... 110
13 Embroidery preparation ...................................... 111
13.1 Attaching the Embroidery Module .......................... 111
13.2 Embroidery Foot ..................................................... 112
Attaching the Embroidery Foot .................................... 112
Selecting the Embroidery Foot ..................................... 113
13.3 Needle and Stitch Plate ........................................... 114
Inserting the Embroidery Needle .................................. 114
Attaching the Stitch Plate (CutWork/Straight) .............. 114
13.4 Selecting the Embroidery Design ............................. 116
13.5 Embroidery Hoops ................................................. 116
Overview Embroidery Hoop Selection ......................... 116
Selecting the Embroidery Hoop ................................... 116
Tear-away Stabilizers .................................................. 117
Cut-away Stabilizers ................................................... 117
Using Adhesive Spray ................................................. 117
Using Spray Starch ...................................................... 117
Using Iron-on Interfacing ............................................ 117
Using Paper-backed Adhesive Stabilizer ...................... 118
Using Water-soluble Stabilizer .................................... 118
Preparing the Embroidery Hoop .................................. 118
Attaching the Hoop .................................................... 120
Overview Embroidery Functions .................................. 121
Locating the Center of the Embroidery Design ............ 121
Centering the Needle to the Embroidery Hoop ........... 121
Embroidery Arm Return .............................................. 122
Grid On/Off ................................................................ 122
14 Creative embroidering ....................................... 123
14.1 Overview Embroidering .......................................... 123
Selecting and Changing the Embroidery Design .......... 123
Overview Editing Embroidery Design ........................... 124
Moving the Embroidery Design ................................... 124
14.2 Selecting and Changing the Embroidery Design ..... 125
14.3 Checking the Embroidery Time and the Embroidery
Design Size ............................................................ 125
14.4 Regulating the Speed ............................................. 125
14.5 Editing the Embroidery Design ............................... 126
Overview Editing Embroidery Design ........................... 126
Scaling Up the Embroidery Design View ...................... 126
Downsizing the Embroidery Design ............................. 126
Moving the embroidery design view ........................... 127
Moving the embroidery design in enlarged view ......... 127
Moving the Embroidery Design ................................... 127
Rotating the Embroidery Design ................................. 128
Altering the Embroidery Design Size Proportionally ..... 128
Mirroring Embroidery Designs ..................................... 129
Checking the Size and the Position of the Embroidery
Design ........................................................................ 129
Deleting an Embroidery Design ................................... 130
14.6 Creating Lettering .................................................. 130
Overview Embroidery Alphabets ................................. 130
Creating Words/Sentences .......................................... 130
Editing Words/Sentences ............................................ 131
Bending the Text ........................................................ 132
Altering the Stitch Density .......................................... 133
14.7 Combining Embroidery Designs ............................. 133
Combining Embroidery Designs .................................. 133
Deleting a Single Embroidery Design ........................... 133

Table of Contents
62022-08 EN 5020079.40A.04
14.8 Changing the Colors of the Embroidery Design ....... 134
Overview Changing the Color ..................................... 134
Changing the Colors ................................................... 134
Changing the Thread Brand ........................................ 135
14.9 Embroidering the embroidery design ...................... 135
Overview Embroidery Menu ........................................ 135
Adding Basting Stitches ............................................... 136
Moving the Hoop ........................................................ 136
Embroidery Sequence Control when the Thread Breaks
.................................................................................... 136
Cutting Connecting Stitches ........................................ 137
Multi-colored Embroidery Design On/Off ..................... 137
Color Indication .......................................................... 137
14.10 Administering Embroidery Designs .......................... 138
Administering Embroidery Designs .............................. 138
Saving Embroidery Designs in the Personal Memory .... 138
Saving the Embroidery Design on the USB Stick ........... 138
Overwriting the Embroidery Design in the Personal
Memory ...................................................................... 139
Loading an Embroidery Design from the Personal
Memory ...................................................................... 139
Loading an Embroidery Design from the USB Stick ...... 139
Deleting an Embroidery Design from the Personal
Memory ...................................................................... 139
Deleting an Embroidery Design from the USB Stick ...... 140
15 Embroidery ........................................................... 141
15.1 Embroidering via the Button «Start/Stop» ............... 141
15.2 Adjusting the Upper Thread Tension ....................... 141
16 BERNINA CutWork Tool ....................................... 143
16.1 Attaching Cutwork Tool ......................................... 143
16.2 Start to cut ............................................................. 144
17 Maintenance and Cleaning ................................. 145
17.1 Cleaning and Maintenance Intervals ....................... 145
17.2 Cleaning the Display ............................................... 145
17.3 Cleaning the Feed Dog ........................................... 145
17.4 Cleaning the Hook .................................................. 146
17.5 Oiling the Needle Bar .............................................. 147
18 Errors and Faults .................................................. 148
18.1 Troubleshooting ..................................................... 148
18.2 Error Messages ....................................................... 151
19 Technical Data ...................................................... 156
20 Appendix .............................................................. 157
20.1 Overview Stitch Patterns ......................................... 157
Practical Stitches ......................................................... 157
Buttonholes ................................................................ 157
Decorative Stitches ..................................................... 157
Quilt Stitches .............................................................. 159
20.2 Overview Embroidery Desings ................................ 160
Editing the Embroidery Design .................................... 160
Embellishment ............................................................ 160
Quilt Designs .............................................................. 162
Borders and Lace ........................................................ 164
Children ..................................................................... 165
Flowers ....................................................................... 166
Seasons ...................................................................... 168
Asia ............................................................................ 170
Sport/Hobby ............................................................... 171
Animals ...................................................................... 173
CutWork .................................................................... 175
Campaign .................................................................. 176
Index .................................................................... 177

IMPORTANT SAFETY INSTRUCTIONS
7
2022-08 EN 5020079.40A.04
IMPORTANT SAFETY INSTRUCTIONS
Please be aware of the following basic safety instructions when using your
machine. Before using this machine, read instruction manual carefully.
DANGER
To protect against electric shock, the following instructions must be observed.
• Never leave the machine unattended when it is connected to the power
supply.
• Immediately after use and before cleaning, switch off the machine and
disconnect the power cable from the outlet.
In order to protect against injury, the following instructions must be adhered to.
• Do not look directly into the LED lamp with optical instruments
(e.g.magnifying glass).
• If the LED lamp is damaged or defective, have the LED lamp checked or
repaired at your local authorized bernette dealer.
• Switch off the machine before working in the needle area.
• Before starting the machine, close all covers.
WARNING
To reduce the risk of burns, fire, electric shock or injury to persons, the following
instructions must be observed.
General Facts
• This machine may only be used for the purpose described in this instruction
manual.
Working Environment
• Do not use the machine outdoors.
• Only use the machine in dry rooms.
• Do not use the machine in a humid area.
• Do not use the machine in rooms where aerosol products (sprays) are being
used.
• Do not use the machine in rooms where oxygen is dispensed.
Technical Condition
• Never use the machine when it is damp.
• Do not use the machine if it is not working properly.

IMPORTANT SAFETY INSTRUCTIONS
82022-08 EN 5020079.40A.04
• Do not use the machine if a cable or the plug is damaged.
• Do not use the machine if it has been dropped, damaged or has fallen into
water.
• If the machine is damaged or does not work properly, have the machine
checked or repaired by your local authorized bernette dealer.
• Keep all ventilation openings of the machine and the foot control free of
lint, dust and loose cloth.
• Do not use the machine if the ventilation openings are blocked.
Accessories and Supplies
• Only use the accessories recommended by the manufacturer.
• Always use the original bernette Stitch Plate.
An incorrect stitch plate can result in needle breakage.
• Use only straight needles of good quality.
Bent or damaged needles can cause needle breakage.
• This machine is double-insulated (except for USA, Canada and Japan).
Use only identical replacement parts. See instructions for Servicing of
double-insulated products.
• To lubricate the machine, only use oil recommended by bernette.
Safety Instructions
• While operating the machine, all protective inserts must be in place and all
covers must be closed.
Appropriate Use
• The machine may be used, cleaned and maintained by children older than
eight or by people with reduced physical, sensory or mental capabilities or if
there is a lack of experience and knowledge as long as they have been given
instructions.
• Furthermore, these persons must be supervised while working with the
machine, and/or they must know the safe operation of the machine and be
aware of the resulting hazards.
• Children are not allowed to play with the system.
• Special care should be taken when the machine is operated by or in the
presence of children.
• Only use the machine with the supplied power cable.
• USA and Canada only: Do not connect power plug NEMA 1-15 to circuits
exceeding 150 volt-to-ground.
• Only use this machine with the supplied foot control of type FC-210.
• Do not insert any objects into the openings of the machine.

IMPORTANT SAFETY INSTRUCTIONS
9
2022-08 EN 5020079.40A.04
• Do not place any objects on the foot control.
• While sewing, guide the fabric gently.
Pulling and pushing the fabric can cause needle breakage.
• Keep fingers away from all moving parts.
• Special care is required in the needle area.
• For activities in the needle area - such as threading the needle, changing the
needle, threading the looper or changing the presser foot - switch off the
machine.
• To switch off, set the power switch to «0».
• When protective covers are removed, when the machine is oiled or when
other cleaning and maintenance operations mentioned in this instruction
manual are carried out, switch off the machine and disconnect the power
plug from the outlet.
• Pull the plug out of the outlet by pulling on the plug. Do not pull on the
cable.

Important Information
10 2022-08 EN 5020079.40A.04
Important Information
Availability of the Instruction Manual
The short manual is part of the machine.
• Keep the short manual of the machine in a suitable place near the machine and have it ready for
reference.
• The latest version of the detailed instruction manual can be downloaded at www.bernette.com.
• When passing on the machine to a third party, enclose the short manual of the machine.
Proper Use
Your bernette machine is conceived and designed for private household use. It is intended for sewing fabrics
and other materials as described in this instruction manual. Any other use is not considered proper. BERNINA
assumes no liability for consequences resulting from improper use.
Equipment and Scope of Delivery
Example images are used in these instructions for the purposes of illustration. The machines shown in the
images and the accessories shown therefore do not always match the actual items included with your
machine. The supplied accessory can vary depending on the country of delivery. You can acquire any
accessories mentioned or shown that are not included in the scope of delivery as optional accessories from a
specialist bernette dealer. Further accessories can be found at www.bernette.com.
For technical reasons and in order to improve the product, changes may be made to the equipment of the
machine and the scope of delivery at any time and without prior notice.
Servicing of Double-insulated Products
In a double-insulated product two systems of insulation are provided instead of grounding. No grounding
means is provided on a double-insulated product nor should a means for grounded be added to the product.
Servicing a double-insulated product requires extreme care and knowledge of the system and should only be
done by qualified service personnel. Replacement parts for a double-insulated product must be identical to
the original parts in the product. A double insulated product is marked with the words: «Double-Insulation»
or «double-insulated».
The symbol may also be marked on the product.
Environmental Protection
BERNINA International AG is committed to environmental protection. We strive to minimize the
environmental impact of our products by continuously improving product design and our technology of
manufacturing.
The machine is labeled with the symbol of the crossed-out wastebin. This means that the machine should
not be disposed of in household waste when it is no longer needed. Improper disposal can result in
dangerous substances getting into the groundwater and thus into our food chain, damaging our health.
The machine must be returned free of charge to a nearby collection point for waste electrical and electronic
equipment or to a collection point for the reuse of the machine. Information on the collection points can be
obtained from your local administration. When purchasing a new machine, the dealer is obliged to take back
the old machine free of charge and dispose of it properly.
If the machine contains personal data, you are responsible for deleting the data yourself before returning the
machine.

Important Information
11
2022-08 EN 5020079.40A.04
Explanation of Symbols
DANGER Designates a danger with a high risk which can lead to serious injuries or even death unless it is avoided.
WARNING Designates a medium-risk hazard which can lead to serious injuries if not avoided.
CAUTION Designates a low-risk hazard which can lead to minor or moderate injuries if not avoided.
NOTICE Designates a hazard which can lead to material damage if not avoided.

My bernette
12 2022-08 EN 5020079.40A.04
1 My bernette
1.1 Overview Machine
Overview Front Controls
1
2
3
4
67
8
9
10
5
1 Quick Reverse 6 Securing Stitches
2 Thread Cutter 7 Needle Up/Down
3 Presser Foot Up/Down 8 Upper Multi-function Knob
4 Start/Stop 9 Lower Multi-function Knob
5 Speed Control 10 Needle Left/Right

My bernette
13
2022-08 EN 5020079.40A.04
Operating Components
Number Operating
Component
Name Purpose
1 Quick Reverse > To sew backward, press the «Quick
Reverse» button.
> To sew backward permanently, keep the
«Quick Reverse» button pressed.
The «Quick Reverse» button does not work for
stitch patterns 22–24 and for buttonhole
patterns 51–71.
2 Thread Cutter > To cut the upper thread and the lower
thread automatically, press the «Thread
Cutter» button.
2-6 securing stitches can be programmed in
the Setup-Program. They are sewn before the
thread is cut.
3 Presser Foot Up/
Down
> Press the «Presser Foot Up/Down» button
to raise the presser foot into a hovering
position.
> To raise the presser foot, press «Presser
Foot Up/Down».
4 Start/Stop The button «Start/Stop» serves the purpose to
change the presser foot position and to start
the machine.
> To start the machine, keep the button
«Start/Stop» pressed for 2 seconds.
Sewing Mode
> Press the button «Presser Foot Up/Down»
to raise the presser foot into hovering
position.
Embroidery Mode
> Briefly press the «Start/Stop» button to
raise the presser foot into its highest
position in embroidery mode.
> Press the «Start/Stop» button again to raise
the presser foot into hovering position.
5 Speed Control The sewing speed can be adjusted infinitely
variable with the slide.
> Move the slide to the left to reduce the
sewing speed.
> Move the slide to the right to increase the
sewing speed.

My bernette
14 2022-08 EN 5020079.40A.04
Number Operating
Component
Name Purpose
6 Securing Stitches The function «Securing at Sewing Start» is
activated in the Setup by default and can be
deactivated by pressing the button «Securing».
When the function «Securing at Sewing Start»
is not activated in the Setup, it can be
programmed by pressing the button
«Securing».
A securing icon which appears on the display
during sewing indicates that the function is
activated.
The number of securing stitches can be
programmed in the Setup-Program.
> To sew the securing stitches first, press the
button «Securing» before you start sewing.
> To sew the securing stitches at the pattern
end, press the button «Securing» while
sewing.
> To sew securing stitches within a stitch
pattern combination, press the button
«Securing».
– The selected pattern of the combination
is secured according to the setting.
7 Needle Up/Down > Push the button «Needle Up/Down» to
lower the needle.
> Push the «Needle Up/Down» button again
to raise the needle.
8 Upper Multi-
function Knob
With the «Upper Multi-function Knob» setting
values can be changed in the sewing, the
embroidering and the Setup Program.
9 Lower Multi-
function Knob
With the «Lower Multi-function Knob» setting
values can be changed in the sewing, the
embroidering and the Setup Program.
10 Needle Left/Right There is a total of 15 needle positions. The
needle position is indicated by the needle
position number in the display.
> Press the «Needle Left» button to move the
needle to the left.
> Press the «Needle Right» button to move
the needle to the right.

My bernette
15
2022-08 EN 5020079.40A.04
Overview - Front
3
1
4
5
7
9
8
10
13
12
11
2
6
1 Feed Dog Lever 8 Buttonhole Lever
2 Connection for Embroidery Module 9 Thread Cutter
3 Bobbin Cover 10 Thread Take-up Lever
4 Stitch Plate 11 Top Cover
5 Presser Foot 12 LCD Display
6 Sewing Light 13 Connection for Free Hand System
7 Needle Threader 14 Sewing Table and Accessory Box

My bernette
16 2022-08 EN 5020079.40A.04
Overview Top
3
2
1
4
5
7
6
8
1 Thread Take-up Lever 5 Winding Unit and Holder for Second Spool Pin
2 Bobbin Winder Pretension 6 Stopper Winding Unit
3 Thread Guide 7 Touchscreen Pen
4 Spool Pin 8 Thread Cutter
Overview - Back Panel
1
2
3
4
5
6
7
8
9
10
1 Connection for Power Cable 6 Handwheel
2 Air Vents 7 Carrying Handle
3 Connection for Foot Control 8 Air Vents
4 USB Port 9 Dual Feed
5 Power Switch 10 Sewing Table and Accessory Box

My bernette
17
2022-08 EN 5020079.40A.04
1.2 Accessory
Supplied Accessories
Visit www.mybernette.com/accessories for more accessory information.
Illustration Name Illustration Name
Bobbin (3x) Felt Disc
Spool Net Second Spool Pin
Needle Assortment (2X) Touchscreen Pen
Brush and Seam Ripper Seam Guide
Spool Cap Large Screwdriver
Spool Cap Medium High Thread Tension
Bobbin Case
Spool Cap Small (2x) Power Cable
Straight/CutWork Stitch
Plate
Foot Control
Embroidery Hoop Large,
160x260mm with
Embroidery Template
Presser Foot Lifter

My bernette
18 2022-08 EN 5020079.40A.04
Illustration Name Illustration Name
Embroidery Hoop
Medium,
120x180mm with
Embroidery Template
Lubricator
Embroidery Hoop Small,
50x70 mmwith
Embroidery Template
Slide-on Table
Dust Cover
Overview Presser Feet
Illustration Name Purpose
Zigzag Foot (DA) For sewing different practical,
decorative stitches and hems
with Dual Feed.
Embroidery Foot (JK) For sewing satin stitches,
applications and decorative
patterns.
Zipper Foot (JB) For sewing with Dual Feed. For
sewing in the zipper.
Buttonhole Foot with Slide (RJ) For sewing buttonholes.
Blindstitch Foot (DM) For sewing blind-stitch hems
with Dual Feed.
Button Sew-On Foot (RC) For sewing on buttons.
Overlock Foot (DI) For sewing with Dual Feed. For
sewing overlock stitches over the
fabric edge.

My bernette
19
2022-08 EN 5020079.40A.04
Illustration Name Purpose
Free-motion Embroidery Foot
(RX)
For embroidering, darning and
freehand quilting.
Embroidery Foot (JL) For embroidering, darning and
freehand quilting.
Hopper Embroidery Foot (JX) For embroidering, darning and
freehand quilting.
1.3 Overview User Interface
Overview System Settings
1
2
3
4
5
6
1 Home 4 Creative Consultant
2 Setup Program 5 eco Mode
3 Tutorial 6 Back to Default Setting

My bernette
20 2022-08 EN 5020079.40A.04
Overview Functions/Visual Information
1
2
3
4
5
1 Upper Thread Tension 4 Foot Pressure
2 Needle Selection 5 Stitch Plate Selection
3 Presser Foot Indicator/Presser Foot Selection
Overview Functions and Views
Illustration Name Purpose
Close The display is closed and the
previously made adjustments are
saved.

«Plus» / «Minus» Change setting values.
Confirm Confirms the previously adjusted
alterations. The display is closed.
Cancel The process is canceled. The
display is closed and the
previously made adjustments are
not saved.
Slide By moving the slide the setting
values are changed.
Switch Activates or deactivates
functions.
Process Navigation With the process navigation, you
can return from any display to
the previous the display.