BetaLife BAIKAL 21883 Quick start guide

Assembly Instrustions
we strongly recommend that the product is assmbled on a flat and smooth surface and keep on the same horizontal
line,otherwise,there will be a phenomenon of screw dislocation and cannot be installed
Quicker assembly, we recommend the use of a power drill
on a low-speed setting
Thank you for your purchase.
please follow the instructions below for correct assembly.
BAIKAL Buffet Table
Code:21883

1
2
3
4
5
5
6
7
8
8
9
10
11
12
12
12
13 14
15
16
16
16
2
A32pcs 8pcs 3pcs 76pcs 5pcs
5pcs 30pcs2pcs 8pcs 1pcs 1pcs 8pcs
14*3.5 35*3.5
B C E FD G
I J K
2pcs N
HO
C2
C1
LM
4pcs 12pcs

9
8
8
7
6
3
01 02
03 04
Ax8 Bx4
Ax8 Bx4
Ax4
Nx1

E
D
H
10
11
D
G
D
L
Dx24 Ex4 Hx2
Ox8
4
05 06
07 08
Dx28 Gx5 Kx30 Lx8

X3 16
J
I
5
09 10
11 12
Ax4 Hx1
Fx4C1x6 Dx12 Ix2 Jx2
F
12
13 14
X3
X3
15

C2
16
14
15
6
1413
C2x2 Dx4
X3

7
SURFACE CARE INSTRUCTIONS
CAUTION
A little care and attention will extend the life and good looks of your furniture.Take care when using materias which might spill,
or be sharp or abrasive,on the surface of your furniture.
Normal Cleaning: For normal cleaning use a soft, dry, cleancloth. Glass Cleaning for Frosted Glass:Do not use glass cleanef
of solvent based cleanerson glass that has a frosting effect on it.
Normal Glass Cleaning:You may use normal glass cleaning products on all other types of glass,Use a soft non-abrasive cloth
to remove light dust and finger prints
Leather & Vinyl Cloth Cleaning:Under no circumstances should any abrasive materials be used on these surfaces, as it will
result in irreparable damage.prints.
Do not use solvents,solvent based cleaners,scouring pads,steel wool or scrubbing brushes to clean this furniture item.
Only use a slightly damp, soft,clean cloth on this surface if cleaning is needed.Do not scrub
1.When moving this furntiuye item,please always hold up product.Dragging or sliding could damage the product itself and
the floor surfsce
2.As with all furniture,this unit should not be exposed to direct sunlight,extreme temperatures or moiture,as this can result in
irreparable damage.
3.Be sure to protect the floor,wall or surrounding furniture with a carpet,blanket or shock-absorbing materials during assem-
bly in order not damage them.