Betrue BTS43 User manual

BTS43 BK8000L_AUX_20150713 V1.0_r0
1
User’s Manual
BTS43
Bluetooth Stereo Speaker
With
AUX IN
(Waterproof)
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
2
A.
I portant
Don’ts
•Do not place naked flames, such as lighted candles on or near the
product.
•Do not place objects filled with liquids, such as vases on or near the
product.
•Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
•Do not keep or store this product in wet conditions for long period.
•Do not clean this product with other liquids.
•Do not block or cover the slots and holes in the product.
•Do not push foreign objects into the slots or holes in the product.
•Do not attempt to open this product yourself. here are no user
serviceable parts inside.
•Do not allow children access to plastic bags.
Safety Instructions
•Before using this product, read and follow all warnings and
instructions.
•his product is not intended for use by young children. Young children
should be properly supervised.
•his product is intended for household use only and not for
commercial or industrial use.
•No naked flame sources, such as lighted candles, should be placed on
the product.
•Ventilation should not be impeded by covering ventilation openings
with items such as newspapers, table cloths, curtains and the like.
•Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will
not be covered by warranty.
Warning
•Never remove the casing of this apparatus.
•
Never place this apparatus on the other electrical equipment.
Notice
•If at any time in the future you should need to dispose of this product
please note that: All batteries and accumulators need to be removed
from this product (Removal of Waste Batteries and Accumulators).
•Always bring your product to a professional to remove the built-in
battery.
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
3
FCC Warning State ent
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
his equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. hese limits
are designed to provide reasonable protection against harmful
interference in a residential installation. his equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/ V technician for help.
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
4
B.
Outlook and Controls
Ite
Control
1
.
Rubber Seal Cover
(For Waterproof Seal)
2
.
AUX In socket
(Under Rubber Seal Cover)
3
.
M
ini
USB socket
(Under Rubber Seal Cover)
4.
Power
Button
(
ON
/
OFF
)
5.
Charge LED Indicator
(
Red
)
6.
Mode LED Indicator
(
White
for Bluetooth /
Red
for AUX IN)
7.
Button
(Volume down / Previous)
8.
Button
(Volume
up / Next)
9.
Button
(Searching, Play / Pause)
10
Button
( Call Pick up/ Hang Up / last number redial)
11
MIC
Hole
(for Voice call)
12.
Stand Foot
13.
Left
Speaker
14.
Right
Speaker
15.
Hang
Up
Hook
9
15
1 3 2
4 6 5
13 14
10 11
7 8
12
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
5
C.
About the rechargeable Battery &
Charging
1. Regarding the lithiu rechargeable battery:
his Bluetooth Speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 3 ~ 4 hours or until the “Charge LED (5)” Indicator
light from On to off which show you the battery is fully charged.
For maintain the battery life and performance, if speaker isn’t used
for a while, the battery might need to be recharged. Charge the
battery at least once every month.
2. To recharge the built-in battery:
Connect the Bluetooth Speaker’s “Mini USB socket (3)” with the
Computer’s USB port through USB cable.
he “Charge LED (5)” Indicator will turn On in red, the battery is in
charging.
he “Charge LED (5)” Indicator will turn Off when the rechargeable
battery is fully charged.
Disconnect the USB cable when it is done.
D.
Power ON and
Pairing
1. Press and hold the “ power (4)” button to turn On the device, a
series of tones will sound from speaker. And the “Mode LED (6)”
indicator is fast blinking in White, it is in Bluetooth pairing mode;
2. hen activate the Bluetooth function in your mobile device (such as
Mobile Phone or Personal Computer), the device will enter to
Bluetooth searching mode automatically, if not, tap the relate
selection to manually enter to searching mode. (refer to your device’s
manual when necessary)
3. Your mobile device should show “PBT622” in list, and then select it
for pairing. Waiting for some seconds and you will see connected
message as shown on your mobile device. (For some Bluetooth
devices, you may need to input “0000” as pairing password)
4. If pairing is successful, A tones will sound from speaker and the
“Mode LED (6)” indicator will slow blinking each 3 ~ 4 seconds once.
5. Now, you can start to music play from the mobile device by it music
player program.
6. Press and hold the “ power (4)” button to turn Off the device when
it is not in use.
Note: for saving battery energy, the Bluetooth Speaker will turn to sleep
mode when no device is in paired in 8 minutes. To restart the device, press
and hold the “ power (4)” button.
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
6
E.
Disconnect fro paired device
1. Press and hold the “ (9)” button to switch to new “Searching /
Pairing” mode, the paired device will disconnect.
2. Or, you can choose “Disconnect” from Bluetooth paired device list on
your mobile device.
3. In this case; the Bluetooth Speaker will turn back into “Searching /
Pairing” mode in seconds, a series of tones will sound and the “Mode
LED (6)” indicator will fast blinking in Blue from slow.
4. Now, you can process for new mobile device pair or power Off the
Bluetooth Speaker as you wanted.
F.
Auto r
e
-
connect
with paired device
and New pairing
1. Every time you turn On the Bluetooth speaker power; it will firstly
searching for the mobile device, which has been paired previously
and still in record. he Bluetooth Speaker will re-connect this mobile
device as priority if it is in Bluetooth searching device mode.
2. If not found in some seconds, the Bluetooth Speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pair. (refer to item D.2~5
methods)
G.
Switch to new pairing fro connec
ted
ode
1. In Bluetooth connected mode, you can switch the Bluetooth Speaker
into Bluetooth searching mode for paring with the new device at any
time you desired;
2. Press and hold the “ (9)” button until hear a series of tones sound
and the “Mode LED (6)” will turn back to fast blinking light from slow.
3. Now you can process for new mobile device pair. (refer to item
D.2~D.5 methods)
H.
Bluetooth
Music
Playing
Control F
unction
1. In playing music, press “ (9)” button to pause the music. o resume
the music press it again.
2. Press and hold the “ (8)” button to increases the volume level.
3. Press and hold the “ (7)” button to decreases the volume level.
4. When maximum or minimum volume is reached, a tone sound will
hear.
5. Press once the “ (8)” button to go to next music.
6. Press once the “ (7)” button to go to previous music.
I.
Hand Free F
unction
1. When there is an incoming call during Bluetooth music playing mode;
2. he ringing sound will up and the playing music will pause
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
7
automatically.
3. Press “ (10)” button to pick up the call if you want.
4. Now you have hand free function with the Bluetooth speaker.
5. Press “ (10)” button again to hang up the call when finished. And,
6. he paused music will start to play automatically.
7. Press and hold “ (10)” button for 3 seconds to ignore the incoming
call.
Tip: speak to the “MIC (11)” hole direct with distance in 30 60cm to get
the best speakerphone performance when necessary.
J.
Redial F
or Last Call
F
unction
1. o redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the “ 11)” button to enter into redial function, the
playing will pause and switch to hand free function for redial.
3. Press the “ (11)” button again to hang up the redial call.
4. Make sure that your mobile phone has have last dial call used, if not,
the redial for last call function cannot be activated.
K.
AUX IN Function
1. In power ON mode, connect the Bluetooth Speaker’s “AUX IN (2)”
jack with an external device’s “Earphone / AUX / LINE” Output
through the Audio cable (Supplied).
2. he Bluetooth Speaker will switch to “AUX In” mode automatically
from Bluetooth mode, and the “Mode LED (6)” indicator will switch
light to Red from white.
3. Now the “AUX In” Function is ready, start to music play from your
external device by it control and or program, for example, Play, Stop,
volume control…etc.
4. You also can use Bluetooth Speaker control;
5. Press and hold the “ (8)” button to increases the volume level.
6. Press and hold the “ (7)” button to decreases the volume level.
7. When maximum or minimum volume is reached, a tone sound will
hear.
8. Disconnect the Audio cable when it is done.
L.
Low Power Re inder And Auto S
leep
1. he Bluetooth Speaker will send a tones sound from speaker by every
minutes if the device is in low battery energy level. When you heard
this reminder, please connect the device to the USB power for
charging, if you still want to use the device.
2. If not, the Bluetooth Speaker will power Off automatically when the
battery keeping low energy level in sometime.
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
8
3. In this case, the device cannot be turned On, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery
has not enough energy.
M.
Reset the device
1. In some circumstances the device’s function may hanging and need to
reset. o reset the Bluetooth speaker;
2. Press and hold the “ (7)” button and “ (8)” button at the same
time. he device is reset and will turn Off automatically.
3. After that turn On the Bluetooth Speaker by press and hold the “
(4)” button.
Important: Do not reset the device if it is proper working.
N.
Waterp
roof Handling
1. he Bluetooth Speaker can handle a brief jet of water on its surface or
put is floating on water (IPX7 water resistant).
2. However, it not recommended be operated under running water and
under no circumstance it should never be fully immersed in water.
3. If strange sound phenomenon found, some water may be entered
into speaker’s chamber. In this case, just pour water out, the voice
will return to normal.
4. Make sure that the splash proof “Rubber Seal Cover (1)” it tighten
closed at the right position, before use the Shower Bluetooth speaker
in bathroom or float on water.
5. After use, always wipe the outside of the cabinet thoroughly if it
becomes wet with moisture or water splashes. his will help to
prevent the internal parts of the unit from entry of water and
possible moisture damage.
O.
Trouble Shooting
No power
•
Check battery is it charged with enough energy.
•
Check whether the device is in power OFF mode.
No sound
•
Check whether volume level is in lower position on
your speaker and mobile phone or PC/Mac.
•Make sure that your Bluetooth device is within the
effective operation range.
•Check whether the Bluetooth device is paired.
•Check whether the Bluetooth device show
connected.
•
Check if you have selected the correct audio source.
No response
from speaker
•
Restart the speaker by power Off and On.
All manuals and user guides at all-guides.com

BTS43 BK8000L_AUX_20150713 V1.0_r0
9
P.
Specification
Dimension
188
mm
(
L
) x
40.5
mm
(
W
) x
81
mm (
H
)
Weight
280
g (Approximate)
Bluetooth
Specification
V
2.1 + EDR
Supported Profile
A2DP, AVRCP, HSP
Connection Distance
In 10 meters (open area)
Built-In Battery
Lithium 3.7V, 1500mAh
Playing ime: 4
~
6
Hours (at
75 ~ 80
% of
volume setting)
Power Source Input
Mi
ni
USB Port
PC’s USB port Power or DC
5V, 500mA
Audio
Output Power
3
W
x 2
(at
4
Ohm)
Frequency
Responses
100
Hz to
20
,000Hz
I/O
Audio in link
600~800mV RMS,
10K Ohm
Operating emperature
0 to 40
℃
Q.
Disclai er
Updates to Firmware and/or hardware components are made
regularly. herefore some of the instruction, specifications and pictures in
this documentation may differ slightly from your particular situation. All
items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be
obtained from the description made in this manual.
R.
Recycling
his symbol indicates that the relevant electrical product
or battery should not be disposed of as general
household waste in Europe. o ensure the correct waste
treatment of the product and battery, please dispose
them in accordance to any applicable local laws of
requirement for disposal of electrical equipment or
batteries. In so doing, you will help to conserve natural
resources and improve standards of environmental
protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
All manuals and user guides at all-guides.com