Betrue BTS15 User manual

1
User’s Manual
Model: BTS15
(Splash Proof)
Bluetooth Speaker
With
FM Radio
All manuals and user guides at all-guides.com

2
.
Important
Don’ts
•Do not place naked flames, such as lighted candles on or near the
product.
•Do not place objects filled with liquids, such as vases on or near the
product.
•Do not use or store this product in a place where it is subject to direct
sunlight, heat, excessive dust or vibration.
•Do not keep or store this product in wet conditions for long period.
•Do not clean this product with other liquids.
•Do not block or cover the slots and holes in the product.
•Do not push foreign objects into the slots or holes in the product.
•Do not attempt to open this product yourself. here are no user
serviceable parts inside.
•Do not allow children access to plastic bags.
Safety Instructions
•Before using this product, read and follow all warnings and
instructions.
•his product is not intended for use by young children. Young children
should be properly supervised.
•his product is intended for household use only and not for
commercial or industrial use.
•Do not expose to dripping or splashing.
•No naked flame sources, such as lighted candles, should be placed on
the product.
•Ventilation should not be impeded by covering ventilation openings
with items such as newspapers, table cloths, curtains and the like.
•Make sure the unit is adjusted to a stable position. Damage caused by
using this product in an unstable position or by failure to follow any
other warning or precaution contained within this user manual will
not be covered by warranty.
We, suggests retaining the packaging in case for future transport of the
product.
W RNING:
•
Never remove the casing of this apparatus.
•Never place this apparatus on the other electrical
equipment.
Notice
•If at any time in the future you should need to dispose of this product
please note that: All batteries and accumulators need to be removed
from this product (Removal of Waste Batteries and Accumulators).
•Always bring your product to a professional to remove the built-in
battery.
All manuals and user guides at all-guides.com

3
B.
Outl
ook and Controls
Item
Control
1
Button
(
ON
/
OFF
)
2
Mold
LED Indicator
(
Blue
)
3
Charge
LED Indicator
(
Red
)
4
Button
5
Button
6
Button
7
Button
8
M
icrophone
Hole
9
Rubber Seal Cover
10
Micro
USB socket
11
Suction
Cup
s
12
Speaker
C.
bout the rechargeable Battery &
Charging
a. Regarding the lithium rechargeable battery:
1. his Bluetooth speaker has an internal, non–user-replaceable battery.
For best results, the first time you use this Bluetooth Speaker, let it
charge for about 2 ~ 3 hours or until the Charge LED Indicator light
from On to off which show the battery is fully charged.
2. o maintain the battery life and performance, if speaker isn’t used
for a while, the battery might need to be recharged. Recharge the
battery at least once per month.
b. o recharge the built-in battery:
You can charge the Bluetooth speaker’s battery in two ways:
1. Connect Bluetooth Speaker to the computer. Or,
2. Use the USB power charger cable. (not included)
All manuals and user guides at all-guides.com

4
c. Connection and Charging:
1. Open the Rubber Seal Cover and connects the Bluetooth speaker’s
Micro USB socket with the computer’s USB port through the USB
cable.
2. he Charge LED indicator will turn On, the battery is in charging.
3. he Charge LED indicator will turn Off when it’s fully charged.
4. Disconnect the USB cable when it is done.
Charging LED Function
Item
Mode
Light Status
1.
No DC power input:
LED light O
ff
2.
In Charging:
Light On
3.
Charge Completed:
Light
Off
D.
Power ON and
Pairing
1. Press and hold the button for 2 ~ 3 seconds to turn On the device,
a series of tones will sound and the Mode LED indicator will light up
with blinking.
2. hen, activate the Bluetooth function in your mobile Bluetooth
device (such as mobile phone, mid or personal computer); the
mobile device will enter to Bluetooth searching mode automatically,
if not, tap the relate selection to manually enter to searching mode.
(refer to your mobile device’s manual when necessary)
3. Your mobile Bluetooth device should show “BTS15” in list, and then
select it for pairing. Waiting for some seconds, then you will see
connected message as shown on your mobile Bluetooth device when
they connected and paired.
4. For some mobile Bluetooth devices, you may need to input “0000”
as pairing password.
5. However, if pairing is successful, the Mode LED indicator will slow
blinking each 3 ~ 4 seconds once.
6. Now, you can start to music play from the mobile device by it music
player program.
7. Press and hold the button to turn Off the device when it is not in
use.
Note: For saving battery energy, the Bluetooth speaker will turn off
automatically when no device is paired in 8 minutes.
All manuals and user guides at all-guides.com

5
Power & Mode Indicator Function:
Item
Mode
Description
Light Status
1.
Power OFF
Light O
ff
2. Power ON
At Bluetooth
searching mode:
L
ight On & blinking
(half second onc
e)
At Bluetooth paired
mode
L
ight On & blinking
(
3~4
seconds once)
At Radio mode
L
ight
On &
blinking
At Radio
auto search
& preset mode
L
ight blinking fast
E.
Disconnect from paired device
1. o disconnect with paired device and for better result, turn OFF the
Bluetooth speaker by power ON/OFF button directly. Or,
2. You can choose to disconnect from the Bluetooth device’s list by the
paired device, however, most devices will go back to reconnection
mode in seconds, this means the Bluetooth speaker may again
reconnected with the paired device within few seconds automatically.
urn OFF the Bluetooth function on your mobile device in this case if
you want.
F.
uto r
e
-
connect
with paired device
and New pairing
1. Every time you turn the Bluetooth speaker on; it will first search for
the mobile device, which has been paired previously and still in
record. he Bluetooth speaker will re-connect this mobile device as
priority if it is in Bluetooth searching device mode.
2. If not found in some seconds, the Bluetooth speaker then is turn into
new pairing mode internally.
3. Now you can process for new mobile device pair.
(refer to item D.3~6 methods)
G.
Bluetooth
Music
Playing
Control F
unction
a. On your Bluetooth Device:
1. Switch to music play mode and choose music to start the play, select
music by using / button/icon, Play/Pause the playing music
by using button/icon. And,
2. Adjust the volume level by using device’s volume control Down / Up
button/icon on your Bluetooth device. (refer to your device user’s
manual when necessary)
b. On Bluetooth Speaker:
1. In playing music, press button to pause the music. o resume the
music press it again.
2. Press and hold the button to increases the volume level.
All manuals and user guides at all-guides.com

6
3. Press and hold the button to decreases the volume level.
4. When maximum or minimum volume is reached, a series of tones
will sound.
5. Press once the button to go to next music.
6. Press once the button to go to previous music.
H.
Hand
sf
ree F
unction
1. When there is an incoming call;
2. It will have ringing sound then the playing music will pause
automatically.
3. Press the button to pick up the call if you want.
4. Now you have handsfree function with the Bluetooth speaker.
5. Press the button again to hang up the call when finished.
6. Press and hold the button for 3 seconds to ignore the incoming
call.
7. he paused music will resume playing automatically.
Tip: speak to the MIC hole direct with distance in 0 ~ 60cm to get the
best speakerphone performance when necessary.
I.
Redial F
or Last Call
F
unction
1. o redial for last called number by the Bluetooth Speaker, even it is in
music playing mode.
2. Press twice the button to enter into redial function, the playing
will pause and switch to handsfree function for redial.
3. Press the button again to hang up the redial call.
4. Make sure that your mobile phone has last dial call used, if not, the
redial for last call function cannot be activated.
J.
FM radio function
a. Switch to FM Radio:
1. In power On / Bluetooth mode, press and hold the button for 2 ~
3 seconds to switch into FM radio, a voice announce “Radio” from
speaker and the Mode LED will switch to long light from slow
blinking. It is in FM Radio function and you may hear some radio
noise from speaker.
2. Press and hold the button for 2 ~ 3 seconds again to return into
Bluetooth mode.
b. Manual Tune / Search Station(s):
1. In FM Radio mode, press the / button for searching down / up
to receive next radio frequency, each press will step down / up by
frequency 0.1MHz.
2. Press the / button quickly until to your desired radio
frequency of radio station.
All manuals and user guides at all-guides.com

7
c. uto Tune / Search and uto Preset Stations:
1. In FM radio mode, press and hold button for 2 ~ 3 seconds to
enter into auto search and auto preset stations, a voice announce
“Radio Channel Searching” from speaker and the Mode LED will
rapidly flash blue from long light and the radio is in searching radio
stations in range of frequency 87.5MHz – 108MHz simultaneously.
2. he radio’s searching will end and go to the first received radio
station for listening and all found radio stations will be preset and
stored into device’s memory automatically.
d. Change the Preset Stations:
1. From current receiving preset station;
2. Press the button to next preset station;.
3. Press the button again until to your desired preset station.
e. djust Volume:
1. Press and hold the button to increases the volume level.
2. Press and hold the button to decreases the volume level.
f. Radio Mute:
1. Press the button to mute the radio sound.
2. Press it again to resume for radio listening.
ROUBLE SHOO ING :
K.
Low Power Reminder nd uto S
leep
1. he Bluetooth speaker will send tones sound from speaker, if the
rechargeable lithium battery running at low energy, when you heard
this sounds, please connect the device to the computer or USB
power for charging, if you still want to use the device.
2. If not, the Bluetooth speaker will power Off automatically when the
battery is keeping low energy level in some minutes.
3. In this case, the device cannot be turned On, until you recharging the
battery at least 10 ~ 15 minutes, because the rechargeable battery
has not enough energy.
L.
Reset the
Bluetooth Speaker
1. In some circumstances the device’s function may hanging and need
to reset. o reset the Bluetooth speaker;
2. Press and hold the button for 8 ~ 10 seconds, the device should
reset and turn itself to On automatically.
3. If the Bluetooth speaker does not turn on, press and hold the
button for 2 ~ 3 seconds.
Important: Do not reset the device if it is proper working.
All manuals and user guides at all-guides.com

8
M.
Splash
P
roof Handling
1. he Bluetooth speaker can handle a brief jet of water on its surface
(IPX4 level water resistant). However, it should never be operated
under running water and under no circumstance it should never be
fully immersed in water.
2. Before use the Bluetooth speaker in bathroom, make sure that the
splash proof Rubber Seal Cover it tighten closed at the right position.
3. After used in bathroom, always wipe the outside of the case
thoroughly if it becomes wet with moisture or water splashes. his
will help to prevent the internal parts of the unit from entry of water
and possible moisture damage.
N.
Tro
uble Shooting
No power
•
Check battery is it charged with enough
energy.
•Check whether the device is in power OFF
mode.
No sound
•
Check whether volume level is in lower
position on your speaker and mobile phone
or PC/Mac.
•Make sure that your Bluetooth device is
within the effective operation range.
•Check whether the Bluetooth device is
paired.
•Check whether the Bluetooth device show
connected.
•Check if you have selected the correct audio
source.
No response from
speaker
•
Restart
the Bluetooth speaker by usi
ng reset
function
.
O.
Specification
Dimension
78
mm
(
L
) x
78 mm
(
W
) x
46
mm (
H
)
(Not
included
Suction c
u
p
s
)
Weight
95
g (Approximate)
(Not
included
Suction c
u
p
s
)
Bluetooth
Specification
V2.1 + EDR
Supported Profile
A2DP, AVRCP, HSP
/HFP
Connection Dis
tance
In 10 meters (open area)
Built-In Battery
Lithium 3.7V, 600
mAh
Playing ime:
3
~ 4
Hours (at
7
0 ~ 80
% of
volume setting)
Power
Source
Mi
cro
USB Port
All manuals and user guides at all-guides.com

9
PC’s USB port Power or DC 5V, 500mA
Audio
Output Power
2
W
(RMS)
at
4
Ohm
Frequency
Response
s
1
0
0Hz to
20
,000Hz
Radio
FM Band
87.5MHz~108MHz, step
0.1MHz
Preset Station
40 Channels
Operating emperature
0 to 40
℃
P.
Disclaimer
Updates to Firmware and/or hardware components are made
regularly. herefore some of the instruction, specifications and pictures in
this documentation may differ slightly from your particular situation. All
items described in this guide for illustration purposes only and may not
apply to particular situation. No legal right or entitlements may be
obtained from the description made in this manual.
All manuals and user guides at all-guides.com