
下单
145x210mm
2019.7.20
INSTRUCTIONS
FOR USE:
Thank you for purchasing the Bigboi
Buddi Jnr. Before you start enjoying
the features and benefits of touchless
drying please take a minute to read
the below and familiarise yourself with
the dryer.
IN THE BOX
•
Bigboi Blower Buddi Jnr
•
1 replacement filter
•
2 hose nozzles
Open the dryer box, take out the
dryer, and check its appearance, if
there is no damage, proceed with
the following steps:
1.
Take dryer out of the box and
connect the desired nozzle in a
screwing motion, fastening the
nozzle to the unit.
2.
Pluginthedryer (pleasemakesure
the power supply voltage in your
country matches the machine);
3.
Switch on the dryer to enjoy warm
filtered air with touchless drying.
IMPORTANT NOTICE
1.
This machine use AC power source,
power must have good grounding
before used.
2.
To maintain a smooth flow of air,
please keep a safe distance from the
surface. This will allow the warm
filtered air to travel smoothly over a
larger surface making the dryingmore
efficient and preventing it from
taking in water which may damage
the machine.
3.
Clean the filter regularly to ensurea
smooth air flow.
4.
Do not let minors close or playwith
the machine!
MAINTENANCE INSTRUCTION
1.
The shell of the machine can be
cleaned with a soft cloth and neutral
detergent solution (to avoid spoiling
the paint work) then use a dry clothto
clean it.
2.
Use water or a strong fanto clean
the filters regularly. Note that filters
must be dry before operating the
machine. The machine has a
standby filter packaged with it.
3.
When the machine runs out of
carbon brush, please contact a
professional to check and update the
required parts.
BIGBOI BLOWR
INSTRUCTION MANUAL
BLOWR BUDDI JNR
TOUCH LESS
CAR, MOTORCYCLE & MARINE
DRYER
For further information on any Bigboi products,
please contact