bigboi BLOWR MINI+ User manual

Thank you for purchasing the Bigboi
Mini+. Before you start enjoying the
features and benets of touchless
drying please take a minute to read
the below and familiarizes yourself
with the dryer.
IN THE BOX
• Bigboi Blower MINI+
• 5 meter hose
• 1 replacement lter
• 2 lockable hose nozzles
Open the dryer box, take out the
dryer, and check its appearance, if
there is no damage; go on with
following steps:
2. Plug in the dryer (please make sure
the power supply voltage in your
country matches the machine);
3. Switch on the dryer and adjust it to
your desired wind speed. The
temperature will adjust automatically
during operation subject to your
speed and motor set up. Then the
INSTRUCTIONS
FOR USE:
BIGBOI BLOWR MINI+
INSTRUCTION MANUAL
TOUCHLESS
DRYER
CAR, MOTORCYCLE & MARINE
BLOWRMINI+
dryer can begin the drying process.
For further information on any Bigboi products,
please contact [email protected]
IMPORTANT NOTICE
1. This machine use AC power source,
power must have good grounding
before used.
2. To maintain a smooth ow of air,
please keep a safe distance from the
surface. This will allow the warm
ltered air to travel smoothly over a
larger surface making the drying more
ecient and preventing
Taking in water which may damage
the machine.
3. Clean the lters regularly to ensure
a smooth air ow.
4. If the motor does not work after
being plug in, please turn o heat
Switch immediately to avoid
damaging the heating element.
5. Do not let minors close or play with
the machine!
MAINTENANCE INSTRUCTION
1. The shell of the machine can be
cleaned with a soft cloth and neutral
detergent solution (to avoid spoiling
the paint work) then use a dry cloth to
clean it;
2. Use water or strong fan to clean the
lters regularly. Note that lters
cannot be xed on the machine until
it is totally dry, in case the water may
damage the machine. The machine
has a standby lter packaged with it.
3. When the machine runs out of
carbon brush, please contact a
professional to check and update the
required parts.
6.
The appliance is not to be used by
persons(including children)with reduced
physicalsensory or mental capabilitiesor
lack of experience and knowledge,unless
they have been given supervision orinstruction.
Children being supervised not to play with
the appliance
1. Place or x the dryer, connecting
the hose with hose adapter.
Fastening clockwise with 45 degree.

PRODUCT FEATURES
See the label of the machine.
FUNCTIONS & FEATURES
Soft Start
Thanks to the protection from current buers, when the dryer starts, the
dryers will not discharge any impulse current, exerting no adverse inuence
upon the neighboring working electrical equipment.
Low Noise and Powerful Airow
The specially-designed noise reduction system will deliver 10%-greater
airow than any other twin-motor dryers, with over 4HP (2800watts) this
model can dry your car, motorcycles, boat or ski faster in a less noise
environment which will benet the operator.
Full Function
This model is especially designed with high speed setting, which can work
at full speed, as well as minimum airow and high-heat settings, allowing
precision drying and accurate wind speed when needed.
BBT (Bigboi Temperature Technology)
4 Stage adjustable warm ltered air 15c /40c higher than the surrounding
environment. All this available at a touch of your ngertips.
Adjustable wind control
With the Centre piece of the control panel, showcasing the bigboi logo is
the wing control nob. This will allow the user to adjust the wind speed from
30kmh to 275kmh.
Extra Long
We understand sizes matters, so at bigboi we have extended our
commercial grade hose to a massive 5 meters. This will allow you to
maneuver around your selected car, Motorcycles, boat or ski with ease.
Accessories
Visit your supporting countries distributor website to see how you can
make your blower even more awesome with accessories.
STRUCTURE
REPRESENTATION
1 motor- you have 2 stages where you can change the heating, please note
this is done automatically on this unit. 1st stage is in full mode where the unit
motor will generate the heat to a designed level. 2nd stage is in adjustment mode
where you can adjust the motor speed to give you different heat settings along
the way.
2 motors- same as the above but giving you 4 stages in total. Its not like the
mini where a heating element is needed inside that you can select and increase
the heat. The unit has been designed to alter its heat for ease of use depending
on the stages you select.
.
.
NO Name Amount
1 Air nozzle 2
2 Handle 1
3 Hose 1
4 Hose adapter 1
5 Front cover 1
6 Shield 1
7 Bracket 1
8 Electric fan 1
9 Anti-vibration pad for motors 1
10 Case component 1
11 Motor stand 1
12 Electric fan 1
13 Anti-vibration pad for motors 1
14 Back cover 1
15 Inner noise elimination cover 1
16 Filter 1
17 Outer noise elimination cover 1
18 Screw nuts 1
19 Signal 2
20 Power switch ( select 1 or 2
motors ) 1
21 Velocity adjustment knob 1
22 Stages switch(speed full or
adjustable) 1
WARNING